Vaillant climaVAIR V 7-085 M3N User manual

V 7-025 NW
V 7-035 NW
V 7-050 M2N
V 7-060 M2N
V 7-075 M3N
V 7-085 M3N
climaVAIR
DE, EN, ES, HR, IT, NL

For the user
User Manual
Air Conditioner - climaVAIR
Split Type
EN
V 7-025 NW
V 7-035 NW
V 7-050 M2N
V 7-060 M2N
V 7-075 M3N
V 7-085 M3N

2
Contents
Split Type User Manual
Contents
1 Your Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1.1 Symbols used
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1.2 Proper Use of the Unit
. . . . . . . . . . . . . . . . . . . . . . .
3
2 Extreme Operating Conditions
. . . . . . . . . . . . . .
3
3 Identification of the Unit
. . . . . . . . . . . . . . . . .
4
4 Declaration of Conformity
. . . . . . . . . . . . . . . .
4
5 Description of the Unit
. . . . . . . . . . . . . . . . . . .
4
5.1 Remote Controller
. . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5.2
Technical Specifications
. . . . . . . . . . . . . . . . . . . . . .
5
6 Initial Settings
. . . . . . . . . . . . . . . . . . . . . . . . . .
6
6.1 Fitting the Remote Controller Batteries.
. . . . . . . .
6
6.2 Clock Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
7 Operating Instructions
. . . . . . . . . . . . . . . . . . . .
7
7.1 General Safety Considerations during Use
. . . . . .
7
7.2 Identification of Functions
. . . . . . . . . . . . . . . . . . . .
8
7.2.1
Remote Controller Buttons
. . . . . . . . . . . . . . . . . . .
8
7.2.2 Display Indicators
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
7.3 Advice on how to use the Remote Controller
. . . .
9
7.3.1 Remote Controller Lock
. . . . . . . . . . . . . . . . . . . . . .
9
7.4 Connection/Disconnection of the Unit
. . . . . . . . . .
9
7.5 Selection of the Operation Mode
. . . . . . . . . . . . . .
9
7.5.1 Automatic Mode (AUTO)
. . . . . . . . . . . . . . . . . . . . . .
9
7.5.2 Cooling Mode (COOL)
. . . . . . . . . . . . . . . . . . . . . . .
10
7.5.3 Dehumidifying Mode (DRY)
. . . . . . . . . . . . . . . . . . .
1
1
7.5.4 Fan Mode (FAN)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
7.5.5 Heating Mode (HEAT)
. . . . . . . . . . . . . . . . . . . . . . . .
1
3
7.6 Setting the Airflow Direction
. . . . . . . . . . . . . . . . .
1
4
7.6.1 Vertical Airflow
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
4
7.6.2 Horizontal Airflow
. . . . . . . . . . . . . . . . . . . . . . . . . . .
1
5
7.7 Special Function Selection
. . . . . . . . . . . . . . . . . . . .
1
5
7.7.1 Health Anion Operation (HEALTH)
. . . . . . . . . . . . .
1
5
7.7.2 Health Airflow Operation (HEALTH FLOW)
. . . . .
1
6
7.7.3 SLEEP Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
7
7.7.4 TIMER ON/OFF Function (CONNECTION/
DISCONNECTION USING TIMER)
. . . . . . . . . . . . . .
1
8
7.7.5 POWER/SOFT Function
. . . . . . . . . . . . . . . . . . . . . .
1
9
7.8 Emergency Operation and Operation Test
. . . . .
20
7.8.1 Emergency Operation
. . . . . . . . . . . . . . . . . . . . . . .
20
7.8.2 Operation Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
0
7.8.3 Cancellation of Emergency Operation/
Emergency Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
0
8 Advice for saving Energy
. . . . . . . . . . . . . . . . .
2
1
8.1 Suitable ambient Temperature
. . . . . . . . . . . . . . . .
2
1
8.2 Eliminating Heat or Cold Sources
. . . . . . . . . . . . . .
2
1
8.3 Operation in Heating Mode (Heat Pump).
. . . . . . .
2
1
8.4 Ambient Temperature when absent
. . . . . . . . . . . .
2
1
8.5 Uniform Heating
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
1
8.6 Reduction in Consumption during Night Hours
(SLEEP Function)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
1
8.7 Reduction in Consumption with programmed
Operating Time (TIMER Function)
. . . . . . . . . . . . . .
2
1
8.8 Appropriate Maintenance of the Unit
. . . . . . . . . . .
2
1
9 Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . .
2
2
10 Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
10.1 Cleaning the Remote Controller
. . . . . . . . . . . . . .
2
3
10.2 Cleaning the Indoor Unit
. . . . . . . . . . . . . . . . . . . .
2
3
10.3 Cleaning the Air Filters
. . . . . . . . . . . . . . . . . . . . . .
2
3
10.4 Cleaning the Outdoor Unit
. . . . . . . . . . . . . . . . . . .
2
3
11 Storage over a prolonged Period
. . . . . . . . . .
2
4
12 Product Decommissioning
. . . . . . . . . . . . . . .
2
4

3
Split Type User Manual
EN
1 Your Safety
1.1 Symbols used
Danger!
Direct danger for life and health.
Danger!
Danger of electric shock.
Warning!
Potentially dangerous situation for the product
and the environment
Note!
Useful information and indications.
1.2 Proper Use of the Unit
This unit has been designed and manufactured for
acclimatisation purposes by means of air conditioning.
The use thereof for other domestic or industrial
purposes shall be the exclusive responsibility of the
persons projecting, installing or using them in that way.
Prior to handling, installing, starting up, using or
performing maintenance on the unit, the persons
assigned to perform these tasks should be familiar with
all the instructions and recommendations set forth in
the unit's installation manual and in the user manual.
Vaillant does not accept any responsability for damages
that may arise from non-observation of the following
instructions.
Note!
The Installation of the unit has to be done by
qualified people. Do not install it yourself. All
electrical repairs should be also carried out by
qualified electricians
Note!
Please read this User Manual carefully before
using the air conditioning.
Note!
Keep the manuals throughout the service life of
the unit.
Note!
The information relating to this unit is divided
between two manuals: installation manual and
user manual.
2 Extreme Operating Conditions
This unit has been designed to operate within the range
of temperatures indicated on Figure 2.1.
Ensure that these ranges are not exceeded.
CALEFACCIÓN
Fig. 2.1 Operating ranges of the unit.
Legend
D.B. Temperature measured by dry bulb
Your Safety 1
Extreme Operating Conditions 2
Indoor
Outdoor
43ºC D.B.
18ºC D.B.
18ºC D.B.
15ºC D.B.
27ºC D.B.
24ºC D.B.
-7ºC D.B.
C
OOLING
HEATING
32ºC D.B.

4
Split Type User Manual
3 Identification of the Unit
This manual is valid for the Split Type series. In order to
know the specific model of your unit please refer to the
unit nameplates.
The nameplates are located on the outdoor and indoor
units.
4 Declaration of Conformity
The manufacturer declares that this unit has been
designed and constructed in compliance with the
standard in force with regard to obtaining the CE
Marking.
5 Description of the Unit
This unit is comprised of the following elements:
- Outdoor unit.
-
Indoor unit.
- Remote controller and holder.
- Connections and channels.
- Accessories.
Figure 5.1 shows the unit components.
Fig. 5.1 Unit components.
Legend
1 Indoor Unit
2 Outdoor unit
3 Remote controller and holder
4 Connections and channels
5 Condensed water drainage pipe
5.1 Remote Controller
The remote controller allows using the unit.
3 Identification of the Unit
4 Declaration of Conformity
5 Description of the Unit

5
Split Type User Manual
EN
5.2 Technical Specifications
TECHNICAL
SPECIFICATIONS
PICTORIAL
SYMBOL
DESCRIPTION
Heat pump
The equipment is reversible. It allows cooling or heating the rooms as desired.
Refrigerant R-410A
Refrigerant free of chlorine, ecological and environmentally friendly with a transfer
capacity greater than R 407 C or than R22, providing far better COP levels.
Inverter DC technology
Energy saving greater than conventional inverter systems.
Inverter technology
Consumption is adapted to the acclimatization requirement in a regulated way,
guaranteeing very low energy costs. The equipment can be operated under extreme
temperature conditions.
Activated carbon filter
It analyses and purifies harmful gases, eliminating strange odours and maintaining a
fresh atmosphere. This filter's exposure to sunlight regenerates its anti-odour capacity.
Anti-bacterial filter
Filter with an anti-allergic and anti-bacterial effect which keeps the atmosphere clean
and healthy.
Anti-dust filter
Anti-dust filter.
Remote controller
Remote controller using infrareds.
Hot start function
Start and stop with hot battery which avoids the discharge of cold air.
Auto restart function
After a voltage cut-off the unit's automatic restart function is guaranteed under the
conditions established before the cut-off.
Valve protection
This protects the outdoor unit's faucets from bad weather.
Anti-freeze
This prevents the freezing of the outdoor unit during the winter months.
Anti-corrosion casing
Outdoor unit made of galvanized steel and anti-corrosion materials.
Resistant even in highly saline environments.
Table 5.1 Technical Specifications.
Description of the Unit 5

6
Split Type User Manual
6 Initial Settings
6.1 Fitting the Remote Controller Batteries
Insert two batteries R-03 (7#), as described below (see
Figure 6.1).
Fig. 6.1
Fitting the remote controller batteries.
Legend
1 Battery lid
2 Batteries
A Pressure area for opening the lid
B Battery compartment
• Remove the battery lid by pressing gently on zone A
and pushing the lid downwards.
• Insert the batteries in the remote control ensuring
correct positive and negative polarity (Shown on the
battery compartment).
• Put the lid back on.
• Press the ON/OFF button (see Figure 7.1) to check that
the batteries are correctly inserted.
Note!
If nothing appears on the display after pressing
ON/OFF , reposition the batteries.
Always replace the two batteries at the same time.
Note!
If the remote controller does not run properly
during operation, please remove the batteries and
reposition a few minutes later.
Remove the batteries in case the air conditioning
is out of use for a long period. If there is anything
still showing on display, just press the reset button.
Remove the batteries in case the air conditioning is
out of use for a long period. If there is anything still
showing on display, just press the reset button.
Warning!
Danger of the enviromental contamination by not
disposing of the batteries properly.
When replacing the remote controller batteries,
leavethe old batteries in suitable containers.
Never throw away in the rubbish.
6.2 Clock Settings
Use the remote controller to adjust the unit clock the
first time the unit is started or after replacing the
batteries, see Figure 6.2.
• Press the CLOCK button.
The “AM” or “PM” indicators start to flash on the
remote controller display.
• Press the UP / DOWN buttons to set the desired time:
When pressing the UP / DOWN buttons, the time
configuration will increase or decrease by 1 minute.
If the UP / DOWN buttons are kept pressed, the time
will increase or decrease rapidly.
•
Press the SET button to confirm the time setting.
The “AM” or “PM” indicators will stop flashing and the
clock will start to operate.
Fig. 6.2 Clock Settings.
Legend
1 CLOCK button
2 UP / DOWN buttons (increase/decrease)
3 SET button
6 Initial Settings

7
Split Type User Manual
EN
7 Operating Instructions
7.1 General Safety Considerations during Use
Danger of injury and physical damage!
- Do not let children play with the air
conditioning unit.
The unit is not designed for
use by children or infirm persons without
supervision. Children should not sit on the
outdoor unit under no circumstances.
- Do not put any objects on top of the unit.
- Do not connect the equipment whilst using
insecticides or pesticides. These could settle
in the unit and harm the health of persons
with allergies to specific chemical
substances.
- Avoid prolonged exposure to cooled air or
extreme temperatures in the room and do not
direct the air flow at people, especially
infants, infirm people or old people.
- Do not use this unit to preserve food, art
work, precision equipment, plants or animals.
- Do not cover the ventilation grille and do not
insert your fingers or other objects in the air
inlets and outlets, or between the unit slats
whilst the unit is operating. The high speed
of the fan can cause injuries.
- Always remember to unplug the unit before
openning the Inlet grille. Never unplug the
unit by pulling the power cord.
- Do not leave the power supply cord in a
bundle and take care not to damage the
power supply cord. After installation the
power plug should be easily reached.
- Do not damage any parts of the unit
containing refrigerant by piercing the air
conditioning's tubes with sharp or pointed
items, by crushing or twisting any tube or by
scraping the coating off the surface. If the
refrigerant spurts out and gets into your
eyes it may result in serious eye injuries.
- Do not interrupt the operation of the air
conditioning unit by pulling the cord.
Danger of injury and physical damage!
Danger of fire and explosion.
- Damaged air conditioners should not be put
into operation. In case of doubt, consult your
supplier.
- The air conditioner must be properly
grounded in accordance with specifications.
- Do not place any heat source with flame in
the equipment airflow. Do not use sprays or
other flammable gases near the air
equipment. This could cause a fire.
- In the event that any irregularity is detected
(such as a burning smell), unplug the unit
from the mains immediately and contact the
distributor in order to proceed properly. If
you continue to use the unit under these
irregular conditions, it could be damaged and
cause short circuiting or fire.
- If the power supply is damaged, make sure it
is replaced by the manufacturer or its
service agent or a qualified person.
- If the fuse of the Indoor unit is broken,
please change it with type T.3.15A/ 250V. If
the fuse of the Outdoor unit is broken,
change it with type T.25A/250V.
- The wiring should be done according to the
local wiring standards.
- In order to protect the unit, please turn off
the A/C first and at least 30 seconds later,
cutting off the power.
- Phone a specialist technician and ensure that
preventive measures are implemented to
avoid refrigerant gas leaks. Leaking
refrigerant of a certain density can cause
oxygen deficiency
Danger!
Danger of electric shock.
Do not handle the equipment with wet or moist
hands.
Warning!
Danger of breakdowns or malfunction.
- Do not place any object on the outdoor unit.
Operating Instructions 7

8
Split Type User Manual
7.2 Identification of Functions
7.2.1 Remote Controller Buttons
Fig. 7.1 Overview of the buttons.
Legend
1 LOCK button
2 LIGHT button, only for the model with the background light
function
3 CODE button
4 TIMER button
5 CLOCK button
6 SLEEP button (NIGHTTIME FUNCTION)
7 MODE button
8 HOUR button
9 HEALTH AIRFLOW button (IONIZED AIRFLOW)
10 HEALTH button (IONIZER)
11 ON/OFF button
12 TEMP button (TEMPERATURE)
13 FAN button
14
SWING UP/DOWN button (AIRFLOW DIRECTION UP/DOWN)
15 SWING LEFT/RIGHT button (AIRFLOW DIRECTION LEFT/RIGHT)
16 FRESH button
17 SET button (SETTING)
18 POWER/SOFT button
19 RESET button
7.2.2 Display Indicators
Fig. 7.2 Overview of the indicators.
Legend
1 TIMER ON indicator
2 FAN SPEED indicator
3 LOCK indicator
4 SWING UP/DOWN indicator (AIRFLOW DIRECTION UP/DOWN)
5
SLEEP indicator (NIGHTTIME FUNCTION)
6 HEALTH indicator (IONIZER)
7 FRESH AIR indicator
8 CODE indicator
9 SIGNAL SENDING indicator
10 POWER/SOFT indicator
11 AIR FLOW LEFT/RIGHT indicator
12 TEMP indicator (TEMPERATURE)
13 TIMER OFF indicator (DISCONNECTION USING TIMER)
14 CLOCK indicator
7 Operating Instructions

9
Split Type User Manual
EN
7.3 Advice on how to use the Remote Controller
Follow the recommendations below as to how to use the
remote controller:
- When in use, direct the head of the signal transmitter
directly to the indoor unit receiver.
- Keep the distance between the transmitter and the
receiver within 7 m.
- Avoid obstacles between the transmitter and the
receiver.
-
Reduce the distance between the remote controller
and the indoor unit in locations with fluorescent lights
with electronic switching on or cordless telephones.
- Do not drop, throw or strike the remote controller.
7.3.1 Remote Controller Lock
In order to lock the buttons and display of the remote
controller device:
• Press the LOCK button.
The rest of the buttons are deactivated.
The lock status indicator appears.
In order to deactivate the lock:
• Press the LOCK button again.
The rest of the buttons are activated.
The lock status indicator disappears.
Note!
If the remote controller does not operate
correctly, press the RESET button with a sharp
object to reset the remote controller.
7.4
Connection/Disconnection of the Unit
In order to connect the unit:
• Press the ON button on the indoor unit or on the
remote controller; the unit will start to operate.
The liquid crystal display (LCD) will show the latest
operating status of the unit (except the HEALTH,
SLEEP, POWER/SOFT and TIMER ON/OFF functions).
In order to disconnect the unit:
• Press the OFF button on the indoor unit or on the
remote controller; the unit will stop:
7.5 Selection of the Operation Mode
7.5.1 Automatic Mode (AUTO)
In automatic mode (AUTO) the air conditioning unit
automatically selects the cooling (COOL) or heating
(HEAT) mode in accordance with the actual ambient
temperature.
Fig. 7.3 Automatic mode selection.
Legend
1 MODE button
2 AUTO mode indicator
3 TEMP button (increase/decrease)
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.4 Operation modes.
• Select the automatic operation mode (AUTO).
•
Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
Operating Instructions 7

10
Split Type User Manual
7.5.2 Cooling Mode (COOL)
In cooling mode (COOL), the air conditioning unit only
allows cooling.
Note!
In cooling mode it is recommendable to direct
the grates horizontally.
Fig. 7.5 Cooling mode selection.
Legend
1 MODE button
2 COOL mode indicator
3 TEMP button (increase/decrease)
4 FAN button
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.6 Operation modes.
• Select the cooling operation mode (COOL).
•
Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.7.
Fig. 7.7 Fan speed.
When the fan is configured in AUTO mode, the air
conditioning unit automatically sets the fan speed in
accordance with the actual ambient temperature.
Note!
In cooling mode, prolonged use of the unit under
conditions of considerable air humidity can cause
drops of water to fall on the outlet grate.
7 Operating Instructions

11
Split Type User Manual
EN
7.5.3 Dehumidifying Mode (DRY)
In dehumidifying mode (DRY), the air conditioning unit
operates by removing the humidity from the
atmosphere.
Fig. 7.8 Dehumidifying mode selection.
Legend
1 MODE button
2 DRY mode indicator
3 TEMP button (increase/decrease)
4 FAN button
In order to activate:
With the unit connected (see section 7.4):
•
Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.9 Operation modes.
• Select the dehumidifying mode (DRY).
•
Press the TEMP buttons to
select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by
1
ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.10.
Fig. 7.10 Fan speed.
The operation in cooling mode is started when the
ambient temperature is greater than the configured one.
In dehumidifying mode and, when the ambient
temperature exceeds the configured one by 2ºC, the unit
will operate intermittently at LOW speed regardless of
the fan configuration, see Figure 7.11.
Fig. 7.11 Dehumidifying mode working diagram.
Legend
T
1
Configured temperature
Note!
In dehumidifying mode, prolonged use of the unit
under conditions of considerable air humidity can
cause drops of water to fall on the outlet grate.
Operating Instructions 7

12
Split Type User Manual
7.5.4 Fan Mode (FAN)
In fan mode (FAN) the unit does not operate in the
following modes:
- cooling mode (COOL).
- heating mode (HEAT).
- automatic mode (AUTO).
In fan mode (FAN) the temperature configuration and
the SLEEP function are disabled.
Fig. 7.12 Fan selection mode.
Legend
1 MODE button
2 FAN mode indicator
3 FAN button
In order to activate the fan mode (FAN):
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.13 Operation modes.
• Select the fan operation mode (FAN).
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.14.
Fig. 7.14 Fan speed.
7 Operating Instructions

13
Split Type User Manual
EN
7.5.5 Heating Mode (HEAT)
In heating mode, the air conditioning only allows
heating.
Fig. 7.15 Heating mode selection.
Legend
1 MODE button
2 HEAT mode indicator
3 TEMP button (increase/decrease)
4 FAN button
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.16 Operation modes.
• Select the heating operation mode (HEAT).
•
Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
configured temperature will increase or decrease
quickly.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.17.
Fig. 7.17 Fan speed
Note!
In heating mode (HEAT), the hot air will stop
after a short period of time as a result of the
function for the prevention of cold currents.
Operating Instructions 7

14
Split Type User Manual
7.6 Setting the direction of the airflow
The direction of the airflow can be set in vertical and
horizontal directions.
Danger of injury and physical damage!
Avoid direct body contact with the powerful
airflows. Do not expose animals and plants
directly to the airflow. They could suffer
damage.
Warning!
Danger of breakdowns or malfunction.
Do not open the outlet grate manually.
Note!
If the grate does not work correctly, stop the unit
for one minute and restart it carrying out the
settings required with the remote controller.
Note!
In heating mode it is recommendable to direct
the grates vertically.
Note!
In cooling mode it is recommendable to direct
the grates horizontally.
7.6.1 Vertical Airflow
• Press the SWING UP/DOWN button to direct the
airflow upwards or downwards.
The vertical slat will be directed in accordance with
the positions allowed for each operation mode.
On the remote controller or the control panel of the
indoor unit the different icons will be shown in
accordance with the operation mode, see Table 7.1.
- COOL/DRY/FAN modes:
Permitted positions: 1, 2, 3, 4, 6
-
HEAT mode:
Permitted positions: 1, 2, 3, 4, 5, 6
- AUTO mode:
Permitted positions: 1, 2, 3, 4, 5, 6
Vertical Direction
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
(Automatic direction)
Table 7.1 Vertical direction positions.
7 Operating Instructions

15
Split Type User Manual
EN
7.6.2 Horizontal Airflow
• Press the SWING LEFT/RIGHT button to direct the
airflow to the left or right.
The horizontal deflectors are directed in accordance
with the indicated positions.
On the remote controller or the control panel of the
indoor unit the different icons will be shown, see Table
7.2.
Horizontal Direction
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Table 7.2 Horizontal direction positions.
Note!
When stopping the unit, the remote controller
will memorise the configured direction position,
remembering this the next time it is put into
operation.
7.7 Special Function Selection
7.7.1 Health Anion Operation (HEALTH)
The anion generator of the air conditioning unit has the
following functions:
- To generate anions to neutralise the quantity of
cations and anions in the air.
- To kill bacteria.
- To accelerate the sedimentation of dust in the room to
clean the room air.
UV light degerming function:
- UV light emitted by the UV light device of the indoor
unit catalitically activates the nano TiO2 on the multi-
lights touching intermediary, and the degerming effect
is highly efficient and lasting.
Note!
Do not open the inlet grille when the degerming
function is activated.
Fig. 7.18 HEALTH function selection.
Legend
1 HEALTH button
2 HEALTH function indicator
3 FRESH AIR button
4 FRESH AIR indicator
To activate the health anion function:
• Press the HEALTH button
To cancel the function:
• Press the HEALTH button again to stop the health
anion operation.
Operating Instructions 7

16
Split Type User Manual
Fresh Air function (optional):
- The outdoor air can enter indoors through the fresh
air tube, keeping the indoor air fresh.
- To change from health function to fresh air function,
press the FRESH button (
fresh air indicator will appear
on the display).
- To cancel the health function press the FRESH button
again
.
Note!
The HEALTH indicator will light when the indoor
unit fan does not function even if the anion
generator is not operating.
7.7.2 Health Airflow Operation (HEALTH FLOW)
The direction of the ionised airflow can be set in vertical
and horizontal directions.
Fig. 7.19 HEALTH FLOW function selection.
Legend
1 HEALTH FLOW button
In order to activate:
• Press the HEALTH FLOW button to direct horizontally.
The horizontal flow indicator will appear on the
display.
The unit's bottom inlet and outlet grates will close and
the airflow will circulate horizontally from the top inlet
and outlet grates.
• Press the HEALTH FLOW button again to direct
vertically.
The vertical flow indicator will appear on the display.
The unit's top inlet and outlet grates will close and the
airflow will circulate vertically from the bottom inlet
and outlet grates.
• Press the HEALTH FLOW button again to cancel the
health airflow function.
Both the inlet and outlet grates will remain open
operating in the mode in which the unit was
configured before activating the health airflow
function.
Note!
After configuring the health airflow function, the
inlet and outlet grates will be fixed.
Select the adequate fan direction according to
the real conditions.
Note!
In cooling and dehumidifying mode, prolonged
use of the unit under conditions of considerable
air humidity can cause drops of water to fall on
the outlet grate.
Note!
In HEAT mode it is better to select the vertical
flow direction
In COOL mode it is better to select the horizontal
flow direction.
7 Operating Instructions

17
Split Type User Manual
EN
7.7.3 SLEEP function
The COOL, DRY, HEAT modes can be set during the
nighttime hours to avoid an excessive increase or
decrease in the temperature.
Fig. 7.20 Selection of SLEEP function.
Legend
1 SLEEP button
2 SLEEP function indicator
In order to activate:
• Select the desired operation mode (see section 7.5).
• Press the SLEEP button.
In COOL, DRY mode
The ambient temperature increases 2ºC in relation to
the configured one to ensure that the temperature does
not drop excessively during sleeping hours.
- During the first operating hour of the SLEEP function,
the ambient temperature will rise 1ºC above the
configured temperature.
- Once an hour has elapsed, the temperature will rise
1ºC more.
- The unit is operational for 6 hours before stopping.
Fig. 7.21 Working method of the SLEEP function in COOL, DRY
mode.
Legend
T
1
Configured temperature
t
o
Start of the SLEEP function
In HEAT mode
The ambient temperature decreases 2ºC in relation to
the configured one to ensure that the temperature does
not rise excessively during the sleep hours.
- During the first operating hour of the SLEEP function,
the ambient temperature will drop 2ºC below the
configured temperature.
- Once an hour has elapsed, the temperature will drop
2ºC more.
- Once three hours have elapsed, the temperature will
rise 1ºC.
- The unit will be operational for a further three hours
before stopping.
Fig. 7.22 Working method of the SLEEP function in HEAT mode.
Legend
T
1
Configured temperature
t
o
Start of the SLEEP function
In AUTO mode
The unit operates in the operating mode selected
automatically adapted to the corresponding SLEEP
modality.
In FAN mode
The unit does not have SLEEP function.
Note!
Set the wind speed change when sleeping.
If the wind speed is high or medium, set the unit
to reduce to low wind. If the unit is set to low
wind, do not change de setting.
Operating Instructions 7

18
Split Type User Manual
7.7.4 TIMER ON/OFF Function (CONNECTION/
DISCONNECTION USING TIMER)
The unit can be connected/disconnected using the timer.
Fig. 7.23 Selection of TIMER function.
Legend
1 TIMER button
2 TIMER ON/OFF function indicator
3 HOUR buttons (increase/decrease)
4 SET button
In order to activate:
• Select the desired operation mode (see section 7.5).
• Press the TIMER button.
The display configuration of the remote controller will
change.
Each time it is pressed, the timer modality will change
Timer ON/Timer OFF.
The "ON"/"OFF" indicators will light.
TIMER OFF
TIMER O
N
TIMER ON-OF
F
BLANK
Fig. 7.24 Remote controller display configuration.
• Press the HOUR buttons to programme the desired
time:
When pressing the HOUR buttons, the time
configuration will increase or decrease by 1 minute.
If the HOUR buttons are kept pressed, the time will
increase or decrease rapidly.
The time can be set within an interval of 24 hours.
• Press the SET button to confirm the time.
The “ON” or “OFF” indicators will stop flashing.
Time display: the unit starts to operate or stops after x
hours x minutes.
In order to cancel:
• Press the TIMER button various times until the TIMER
ON/OFF function display configuration disappears.
Note!
Correctly set the clock before operating the
timer.
Note!
Restart the time configuration after replacing
the batteries or after a possible power failure.
Note!
The unit has a memory function; when you use
the TIMER ON/OFF function the next time, press
the SET button if the timer configuration is
identical to that used the last time.
7 Operating Instructions

19
Split Type User Manual
EN
7.7.5 POWER/SOFT Function
Use the POWER function when you need fast heating or
cooling.
The SOFT function will reduce the noise level of the unit.
Fig. 7.25 POWER/SOFT
function selection.
Legend
1 POWER/SOFT button
2 POWER/SOFT function indicator
To activate the POWER function:
• Press the POWER/SOFT button.
Each time you press the button, you will modify the
display configuration, see Figure 7.26.
POWER
SOFT
BLANK
Fig. 7.26 POWER/SOFT function display configuration.
• Stop the display in POWER function.
In HEAT or COOL mode the fan speed is available
automatically in HI (high) for 15 minutes in order to
put the configuration back to its original state.
To cancel the POWER function:
• Press the POWER/SOFT button twice.
The indicator will disappear.
To activate the SOFT function:
•
Press the POWER/SOFT button.
Each time you press the button, you will modify the
display configuration, see Figure 7.26.
• Stop the display in SOFT function.
In SOFT function the fan speed is automatically
available in LO (low).
To cancel the SOFT function:
• Press the POWER/SOFT button twice.
The indicator will disappear.
Note!
In POWER function in HEAT and COOL mode, the
room will show an even thermal distribution.
Note!
Prolonged operation in SOFT function will cause
irregularities in the atmosphere, the temperature
not being too cold or too hot.
Operating Instructions 7