Valcom V-1020C User manual

All manuals and user guides at all-guides.com
all-guides.com

Required tools for installation of a V-1020C speaker with V-9914 bridge.
All manuals and user guides at all-guides.com

First cut a pre-measured hole in the ceiling tile.
All manuals and user guides at all-guides.com

Using the bridge as a guide determine the screw holes for the ceiling tile.
All manuals and user guides at all-guides.com

Align the speaker with the holes in the ceiling tile.
All manuals and user guides at all-guides.com

Align the speaker with the bridge on either side of the ceiling tile.
All manuals and user guides at all-guides.com
all-guides.com

Attach all three pieces with the provided hardware.
All manuals and user guides at all-guides.com

Connect all wiring to the screw cages on the speaker.
All manuals and user guides at all-guides.com

Place the speaker assembly in the ceiling grid.
All manuals and user guides at all-guides.com

Lower the speaker assembly into position in the ceiling grid.
All manuals and user guides at all-guides.com