VALD SmartSpeed Pro User manual

SmartSpeed Pro
Quick Start Guide
VALD V1
2021

VALD SmartSpeed Quick Start Guide
2
Contents
1Overview .................................................................................................................... 3
2Components ............................................................................................................... 3
3Accessories................................................................................................................ 3
3.1 SmartScan (RFID) ........................................................................................................................ 3
3.2 SmartShoxx.................................................................................................................................. 3
3.3 SmartPad...................................................................................................................................... 3
3.4 Portable Jump Mat...................................................................................................................... 3
4Charging your system................................................................................................. 4
4.1 Timing units ................................................................................................................................. 4
4.2 SmartHub ..................................................................................................................................... 4
5Software setup ........................................................................................................... 4
5.1 SmartSpeed App.......................................................................................................................... 4
5.2 SmartSpeed Online ...................................................................................................................... 5
6SmartHub setup.......................................................................................................... 5
7Hardware setup .......................................................................................................... 6
8Run a session ............................................................................................................. 7
9Care ........................................................................................................................... 7
10 Health and safety information..................................................................................... 8

VALD SmartSpeed Quick Start Guide
3
1Overview
The SmartSpeed Pro system is the most comprehensive speed, reactive and agility training tool
used by elite clubs, combines and academies around the world.
2Components
The SmartSpeed Pro System consists of the following components:
•2 x Pro timing units
•2 x Reflectors
•1 x SmartHub
•5 x Tripods
•1 x 5V charger
•1 x SmartHub hard travel case
•2 x Pro timing unit sleeves
•1 x 12V Daisy chain charger
•1 x Pro hard travel case (stores up to 6 timing gates)
3Accessories
3.1 SmartScan (RFID)
SmartScan lets users automate SmartSpeed sessions. SmartScan identifies a reusable RFID wrist
band allowing the SmartSpeed app to identify the wearer performing the drill.
3.2 SmartShoxx
SmartShoxx can be attached to an object such as a target or tackle bag. It then detects a vibration
or impact over a desired threshold and records the event with millisecond accuracy.
3.3 SmartPad
Available in two sizes, short and long, SmartPads are hand start pads that connect to a start gate to
measure the accuracy of sprint starts. Timing starts after runners have pressed down on the pad,
then lifted their hand or foot off to start their movements.
3.4 Portable Jump Mat
The Portable Jump mat enables users to incorporate explosive power measurement and plyometric
training in to their SmartSpeed drills.

VALD SmartSpeed Quick Start Guide
4
4Charging your system
4.1 Timing units
To charge your timing units, connect the units to the provided 12V daisy chain charger.
The charging LED, located on the back of each Smartspeed Pro unit, will flash red when charging.
The LED will turn solid red when fully charged.
Note:
•It is recommended that you charge your timing units regularly.
•If the units are used whilst connected to the charger, the units will automatically turn off
after a short period. This is to protect the batteries.
4.2 SmartHub
To charge your SmartHub, connect the SmartHub to the provided 5V charger.
The power LED light, located on the bottom left of the SmartHub, will flash when on.
The charging LED light, located on the bottom right of the SmartHub, will flash when charging.
5Software setup
5.1 SmartSpeed App
The SmartSpeed app is the data capture application for the SmartSpeed system.
The app is available for iOS and Android devices and can be downloaded from the App Store and
Google Play Store –search for SmartSpeed.
Once the SmartSpeed app has been downloaded onto a device, an account is required to log in to
the app.
To create a SmartSpeed account:
1. Open the SmartSpeed app on the device
2. Select Register
3. Complete the registration form
4. Select Create my account
5. Log in

VALD SmartSpeed Quick Start Guide
5
5.2 SmartSpeed Online
SmartSpeed Online is a cloud application and database for the SmartSpeed Pro system. It includes
additional features to the SmartSpeed app, for example the ability to:
•Add and edit teams
•Create custom drills
•Create custom pacing tapes
•View and export results
To access SmartSpeed Online visit smartspeed.fusionsport.com/online and log in with your
SmartSpeed account details. These details are the same login credentials used to log in to the
SmartSpeed app.
6SmartHub setup
The SmartHub is the command centre for the SmartSpeed Pro system. It uses two in-built radio
devices:
•Zigbee - to communicate between timing units; and
•Bluetooth - to communicate to a mobile device (SmartSpeed app)
To setup the SmartHub, start by turning the SmartHub on and extend the antenna (rotate the
antenna clockwise), then connect the SmartHub to an iOS or Android device via Bluetooth.
To connect the SmartHub to an iOS or Android device via Bluetooth:
For iOS devices
1. Go to Settings
2. Go to Bluetooth settings
3. Turn Bluetooth on
4. Select the Bluetooth device that matches the serial number displayed on the SmartHub
5. Confirm Bluetooth pairing with the SmartHub
For Android devices
1. Go to Options menu in top left corner
2. Select Bluetooth Setup
3. Select Bluetooth Settings
4. Turn Bluetooth on
5. Select the Bluetooth device that matches the serial number displayed on the SmartHub
6. Confirm Bluetooth pairing with SmartHub
7. Select Connect
Once the SmartHub is connected to the device, the details will be saved for the next time you use
the SmartSpeed app.

VALD SmartSpeed Quick Start Guide
6
7Hardware setup
Each SmartSpeed Pro timing gate consists of the following components:
•1 x timing unit
•1 x reflector
•2 x tripods
To assemble a timing gate:
1. Assemble the tripods
a. Loosen tripod knob and pull legs away from stem.
b. Push down on knob assembly until supports are horizontal.
2. Connect the timing unit and reflector to the tripods
a. Line up the tripod connection with the bayonet on the tripod.
b. Press down into the tripod and twist into a locked position.
c. Ensure tripod neck is firmly tightened.
Repeat the above steps for all timing gates in your system.
Once all timing gates have been assembled, the gates can be positioned for the required drill.
Refer to the SmartSpeed Drills Manual for suggested drill protocols.
To position a timing gate:
1. Place a timing unit and a reflector in line with each other (generally 1-4m apart)
2. Stand behind a timing unit
3. Turn on the timing unit –the unit will beep until it is correctly aligned with the reflector
4. Hold the top of the unit with one hand
5. Hold the tripod neck with the other hand
6. Direct the light towards the reflector
7. Adjust the light until the red alignment light is on and the unit stops beeping
8. Repeat the above steps for each timing gate required.
Note:
•If using a SmartScan (RFID) or SmartPad, connect it to the start timing unit using the
provided PS2 cable.
•If using SmartShoxx, connect it to the relevant timing unit using the PS2 connector (green
end) on the SmartShoxx. Timing units connected to SmartShoxx do not require a reflector.
•If using a Portable Jump Mat, connect it to the relevant timing unit using the PS2 connector
on the Portable Jump Mat. Timing units connected to a Portable Jump Mat do not require a
reflector.
•In windy environments, ensure timing unit is optimally aligned by moving it side by side
slightly and ensure it remains aligned with the reflector.

VALD SmartSpeed Quick Start Guide
7
8Run a session
To get started with running a session, ensure:
1. You are logged into the SmartSpeed app
2. The SmartHub is connected via Bluetooth
3. Your timing units are turned on
To run a session with the SmartSpeed app:
1. Select Start Session
2. Ensure your timing units are automatically scanned in
Note: Timing units need to be on the same channel as SmartHub to be automatically scanned in. If
you need to change channel, go to SmartHub Tools > System Setup in the SmartSpeed app.
3. Select a Team
4. Select number of Tracks
5. Select a Drill
6. Select Ready
7. Physically walk through the timing gates in the order they have been set up
8. Confirm the order of the timing gates displayed on screen
Note: The battery status of each timing unit will be displayed on screen
9. Select Start
10. Select User Options as required for the protocol
11. Select the Tick Icon
12. Run through the protocol as configured
Note: Results will automatically display onscreen, and the name of the current participant will
display on the right, above the timing clock
13. Select Stop to end the session
14. Select Confirm (or cancel to continue session)
15. Select View Session Results or New Session Setup
9Care
The following is recommended to ensure the protection of your SmartSpeed Pro system:
•When not in use, store your SmartSpeed Pro system in the provided hard travel case.
•In the case of wet weather, ensure the SmartSpeed system components are dry prior to
storage.
•Ensure the timing units and SmartHub are turned off after each session
•Your SmartSpeed Pro system should only be charged using the chargers provided
•Once charged, disconnect the SmartHub and ensure it is turned off.

VALD SmartSpeed Quick Start Guide
8
10 Health and safety information
Precautions when using batteries
•Never use any charger or battery that is damaged in any way.
•Use the battery only for its intended purpose.
•If left unused, a fully charged battery will discharge itself over time.
•Always charge in or as close to room temperature (20 degrees Celsius) as extreme
temperatures will affect the charging capacity of the batteries.
•If Batteries will not recharge (batteries provided have a recharge life of 800 times), DO NOT
ATTEMPT to change the batteries yourself. Instead contact VALD.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the RF signals from the units.
Pacemakers
Pacemaker manufacturers recommend that a minimum of 15cm should be maintained between the
units and a pacemaker.
Hearing aids
Some wireless technology can interfere with some hearing aids. In the event of such interference,
you may wish to consult your hearing aid manufacturer to discuss alternatives.
Other medical devices
If you use other personal medical devices, consult the manufacturer of your device to determine if it
is adequately shielded from external RF energy. Your Physician may be able to assist you in
obtaining this information.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been added to your vehicle.