Vanco PulseAudio PA230BWA User manual

vanco1.com | 800.626.6445
30W, 2 CHANNEL, IN-WALL
ADDRESSABLE BLUETOOTH
AMPLIFIER
PART NUMBER PA230BWA
In-wall addressable Bluetooth audio receiver with a built in 2x30W amplifier

2
1. Do not install or place this unit
in a built-in cabinet, or other
confined space without adequate
ventilation.
2. To prevent risk of electrical shock
or fire hazard, due to overheating
do not obstruct unit’s ventilation
openings.
3. Do not install near any source of
heat, including other units that
may produce heat.
4. Do not place unit near flames.
5. Only clean unit with a dry cloth.
6. Unplug unit during lightning
storms or when not used for an
extended period of time.
7. Protect the power cord from being
walked on or pinched, particularly
at the plugs.
8. Use unit only with accessories
specified by the manufacturer.
9. Refer all servicing to qualified
personnel.
WARNING
THIS PRODUCT IS 100% INSPECTED AND TESTED IN THE
UNITED STATES TO VERIFY PERFORMANCE PARAMETERS.
Thank you for purchasing this product. For optimum
performance and safety, please read these instructions
carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
DEAR CUSTOMER
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Vanco International, LLC is
under license. Other trademarks and trade names are those of their respective
owners.

3
The PulseAudio PA230BWA is an in-wall addressable Bluetooth audio receiver
with a built in 2x30W amplifier in a single gang wall plate form factor, that
creates a simple distributed audio system to stream music over Bluetooth.
Equipped with a Class D, 60 watt in-wall power amplifier that supports 4 Ohm
and 8 ohm speakers. Features two ways of connectivity including a stereo
input (3.5mm jack), and Bluetooth 5.0 for a wireless connection. Automatically
switches sources with the priority for Bluetooth connectivity. Install in one
zone with the ability to install multiple units in one building, as each unit can
be uniquely addressable. Connect the PA230BWA to a computer to address
the ID and password to allow for multiple and unique amplifiers on the same
site without issue! For an amplified 2 channel setup that is simple to operate
with a clean look, the PA230BWA is a great solution to play and control music
from your phone, tablet, or computer to an amplified single zone.
30W, 2 Channel In-Wall Wi-Fi
Streaming Amplifier
Part # PA230BWA
• 2x30W Class D Wall Plate Amplifier with Bluetooth® Wireless Technology
• Bluetooth v5.0 with apt-X
• Programmable ID and password through dedicated software
• 3.5mm analog stereo input
• 4 Ohm/8 Ohm stable
• Supports auto source switching with priority for Bluetooth® enabled source
• Fits easily into a single gang low-voltage box
• Dimensions: 1.6” W x 3.2” D x 4.4” H
FEATURES
PACKAGE CONTENTS
• PA230BWA Bluetooth Wall Plate Amplifier
• Single gang white decora wall plate with screws
• 24V Power Supply
• Micro USB to USB A Cable
• Product Manual

4
CONNECT AND OPERATE
1. Trace and cut out a single-gang hole in a wall and insert a single gang electrical box
2. Connect speaker and power cables while making sure that power is not active and
the unit is turned o by turning the rotary dial counter-clockwise
3. Install the PA230BWA into the electrical box in the wall
4. Connect power on the opposite end and turn on the unit by turning the volume
knob clockwise
5. Bluetooth (BT) status LED will quickly blink and will be in pairing mode
6. Search and connect to the Bluetooth labeled: “Pulse BT”
7. Enter the password that was found on the sticker on the back of the unit before
installing into the wall
8. For Aux-In source, plug-in audio cable and play
NOTE: Ensure all speaker(s) and power wires are run in accordance to local laws and
regulations. Before inserting the amplifier into the electrical box and wall, either note or
remove the Bluetooth password found on the sticker on the back of the unit.
Side View
To Speakers
Power
Front View
Audio Source

5
CONFIGURATION DEVICE NAME AND
PASSWORD
1. Connect a Micro USB Cable from the PA230BWA to a computer’s USB port
2. Launch the PA230BWA Configuration Software tool found on the product page at
www.vanco1.com (under the downloads tab)
3. Select the corresponding Com Port from the drop-down menu
4. Enter the new device name and click Write
5. Enter a pin code/password that will be used to pair the PA230BWA to a Bluetooth
device, and click Write
NOTE: A default password will be provided on a label on the unit

6
SAFETY AND NOTICE
The PA230BWA has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all
electronic equipment, the PA230BWA should be used with care. Please read
and follow the safety instructions to protect yourself from possible injury and
to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit
• Do not attempt to service this unit yourself, except where explained in this manual
• Provide proper ventilation and air circulation and do not use near water
• Keep objects that might damage the device and assure that the placement of this
unit is on a stable surface
• Use only the power adapter and power cords and connection cables designed for
this unit
• Do not use liquid or aerosol cleaners to clean this unit
• Always unplug the power to the device before cleaning
SPECIFICATIONS
Audio Inputs .......................................................Bluetooth v5.0 with apt-X; Stereo
3.5mm
Range.....................................................................30M max, open space
Amplifier Type....................................................Class D
Power Ouput.......................................................30W per channel (@RL= 4 ohm)
THD+N....................................................................1% (@RL 4ohm, f=1kHz)
Min. Load Resistance.......................................4 ohm
Power Source .....................................................24DVC
Audio Priority .....................................................Bluetooth > Aux In
Weight ..................................................................0.8 lbs
Dimensions ..........................................................1.6” W x 3.2” D x 4.4” H

7
TECHNICAL SUPPORT
In case of problems, please contact Vanco Technical Support by dialing 1-800-626-
6445. You can also email technical support issues to [e-mail]. When
calling, please have the Model Number, Serial Number (axed to the bottom of the unit)
and Invoice available for reference during the call. Please read this Instruction Manual
prior to calling or installing this unit, since it will familiarize you with the capabilities
of this product and its proper installation. All active electronic products are 100%
inspected and tested to insure highest product quality and trouble-free installation and
operation. The testing process utilizes the types of high-definition sources and displays
typically installed for entertainment and home theatre applications.For additional
information please visit www.vanco1.com.
LIABILITY STATEMENT
Every eort has been made to ensure that this product is free of defects. The
manufacturer of this product cannot be held liable for the use of this hardware or any
direct or indirect consequential damages arising from its use. It is the responsibility of
the user and installer of the hardware to check that it is suitable for their requirements
and that it is installed correctly. All rights are reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical, including
photocopying, recording or by any information storage or retrieval system without the
written consent of the publisher. Manufacturer reserves the right to revise any of its
hardware and software following its policy to modify and/or improve its products where
necessary or desirable. This statement does not aect the legal rights of the user in any
way.
LIMITED WARRANTY
With the exceptions noted in the next paragraph, Vanco warrants to the original
purchaser that the equipment it manufactures or sells will be free from defects in
materials and workmanship for a period of two years from the date of purchase.
Should this product, in Vanco’s opinion, prove defective within this warranty period,
Vanco, at its option, will repair or replace this product without charge. Any defective
parts replaced become the property of Vanco. This warranty does not apply to those
products which have been damaged due to accident, unauthorized alterations, improper
repair, modifications, inadequate maintenance and care, or use in any manner for which
the product was not originally intended.
Items integrated into Vanco products that are made by other manufacturers, notably
computer hard drives and liquid crystal display panels, are limited to the term of the
warranty oered by the respective manufacturers. Such specific warranties are available
upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible
power supply must be installed in the electrical circuit to protect against power surges.
If repairs are needed during the warranty period the purchaser will be required to
provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller
of this equipment. The seller will then contact Vanco regarding warranty repair or
replacement.

506 Kingsland Drive Batavia, Illinois 60510
call: 800.626.6445 | fax: [phone]
visit: www.vanco1.com
Vanco®International
A brand from Learn more at pulseaudio1.com