Vaniman DOWNDRAFT PRO User manual

DOWNDRAFT PRO
96061
25799 Je󰀨erson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626)  www.vaniman.com
DD-PRO--96061-12/17 Page 1
PACKING LIST
1 - Stainless Steel Worktop
1 - Worktop Sub-assembly
1 - Shield Assembly
1 - 1-1/2" Hose End
2 - 10-3/4" Screw
2 - 10-32 Nuts
ASSEMBLY INSTRUCTIONS
1. Remove the unit and other parts from the box and check against the packing list.
2. Use the attached mounting instructions to cut the correct hole in the countertop.
2. Set the DownDraft Pro in place.
3. Align holes with threaded studs and hold the worktop sub-assembly up while threading the 10-32 nuts on
the studs.
4. Use the #10 screw to secure the sub-assembly to the bottom of the work bench
5. Tighten all fasteners.

DOWNDRAFT PRO
96061
25799 Je󰀨erson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626)  www.vaniman.com
DD-PRO--96061-12/17 Page 2
DIMENSIONS - STANDARD
DIMENSIONS - EXTENDED
21.640
1.000
24.000
14.00
SCALE:1:8
SIZE
DWG. NAME
A
REV.
MATERIAL
FINISH
DO NOT SCALE DRAWING
APPLICATION
USED ON
NEXT ASSY
NAME
DATE
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
SHEET 1 OF 1
96060 Long Plenum
DESCRIPTION:
REVISIONS
DESCRIPTION
REV.
DATE
APPROVED
PROPRIETARY AND CONFIDENTIAL
ZONE
140 N. Brandon Road - Fallbrook, CA 92028
phone: [phone] - fax: [phone]
e-mail:[email protected]
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
VANIMAN MANUFACTURING COMPANY. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
VANIMAN MANUFACTURING COMPANY IS
PROHIBITED.
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
1/32
ANGULAR:
1º
ONE PLACE DECIMAL
.05
TWO PLACE DECIMAL
.03
THREE PLACE DECIMAL
.005
VANIMAN MANUFACTURING CO.
12/21/2017
PART NO.
12/21/2017
FILE DATE:
A
B
C
D
123456