Vantage Hearth CL1 User manual
Vantage CL1 Quick Start
Step 1
Locate the CL1 serial
number, found on your
CL1 data box.
Step 4
Using the mobile device
to be utilized with the CL1,
search Racepak D3 app on
Google Play or Apple
app store.
Step 2
Go to portal.racepak.com
to create your user account
and register the CL1 for use.
Step 5
Install the Racepak D3 app
on the mobile device.
Step 3
Utilize the Resource Center
at portal.racepak.com for
CL1 installation instructions.
Step 6
Pair the mobile device with
your CL1 data box per the
CL1 installation instructions.
MANL-CL1See back for Track Check List
CL1 Track Checklist
Step 1: Ensure vehicle is outdoors, to acquire GPS satellites.
Step 2: Power up CL1.
Step 3: Open D3 app on vehicle mounted mobile device.
Step 4: Log In - Enter account email and password.
Step 5: Settings - Select Motorsports Type.
Step 6: Team - Enter Driver name and Team Receiving Data.
Step 7: Observe CL1 LED - Green blink indicates paired with mobile device.
Step 8: Start Engine - Pit Dash will appear if valid tach signal received by CL1.
Step 9: BOX/GPS/CLOUD indicators on Pit Dash should appear Green.
Step 10: CL1 is ready for track activities.
If issues are encountered review CL1 Installation Manual located at portal.racepak.com
