Vantec UGT-PC210 User manual

5-Port USB 2.0
PCI Host Card
User Manual
Model: UGT-PC210
All brand names and trademarks are properties of their respective owners.
w w w . v a n t e c u s a . c o m


UGT-PC210Page2
Features and Benefits
zVIA VT6212 chipset
zPCI 32-bit 33MHz Interface
zCompliant with USB specification revision 2.0
zBackward compatible with USB 1.1 Specification
zHot-swapping feature allows you to connect/disconnect
devices without first turning system off
zSupports high-speed (480Mbps), full-speed (12Mbps), and
low-speed(1.5Mbps) data transfer modes for simultaneous
operation of multiple USB 2.0/1.1 devices
zConnects up to 127 USB Device Simultaneously on each
port
zWorks with a various type of USB devices including hubs,
removable drives, digital cameras, scanner, CD-RWs,
DVD-ROMs, PC video cameras, printers, and more…
zFour (4) external USB 2.0 ports
zOne (1) internal USB 2.0 port (Sharing with first external
USB port UJ1)

Package Contents
z1 x 5-Port USB 2.0 PCI Host
Card
z1 x User’s Manual
System Requirements
zWindows® 2000 SP4 / XP SP1 or later / Server 2003 / Vista
zAvailable PCI slot
Hardware Description

UGT-PC210Page3
Before installing the 5-Port USB 2.0 PCI Host Card, please see
the photo below highlighting the available USB ports of the card.
Note: The Internal Port (UJ5) shares with first External Port
(UJ1).


UGT-PC210Page4
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector
with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the
correct driver for the 5-Port USB 2.0 PCI Host Card.
However, please ensure you have the latest Service Pack
Installed.
For Windows® XP
zWindows® XP Service Pack 1 or later
For Windows® 2000
zWindows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista


UGT-PC210Page5
Windows® Server 2003/Vista has built-in driver support for this
controller. Just install the board and Windows will automatically
detect and install the correct drivers for it. No additional driver is
necessary.
To Verify Driver Installation
1. Right click My Computer, then click Manage. Click Device
Manager.
2. Double click Universal Serial Bus controllers option.
- USB Root Hub
(USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
- USB Root Hub
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA USB Enhanced Host Controller


UGT-PC210Page6