Vantec EZ Swap 4 User manual

--.-®
V NTEC
User's Manual

Package Contents:
EZ SW P 4 - Removable Hard Drive Rack
(j) EZ Swap 4
(j) Key
(j) SATACable
(j) Installation Screws
®User's Manual
®~nil
V
'All other third-party brands and namesarethe property of their respectiveowners.

Table of Contents:
1. Introduction .. . 02
2. Features/Specifications ...............03
3. System Requirements
u ... u .... u.. .....u .. 04
4. Parts Layout .... .05
5. Installation
...u u 06
6. Installing a Hard Drive u •••• • ••••••••••• u •••• os
7. LCD Display .u ..u.uu.u.u......u u.. 09
S. Warranty/Contact u.u 10
Table of Content
1
1. Introduction
The Vantec EZ Swap 4 - brings simplicity to
your storage needs. A tray-less design allows
youto quicklyaddorremove harddriveson-the-fly
without the hassleof dealing with messy wires
inside your computer. With a simple insertion
of your 3.5 SATA1/11hard drive into the Vantec
EZSwap 4, instantly gives the hard drive a SATA
connection. The stylish LCD on the front door
provides vital stats such as the current hard drive
temperature and fan speed. Front cooling vent
allows for cold air to enter and effectively cool
the hard drive while the back fan exhausts the
hot air. A security lock is also provided to prevent
unwanted hard drive removal or tampering.
Fulfilling your never ending quest of finding a
simple and effective storage solution has never
been any easier with the Vantec EZSwap 4.
Introduction
2
MRK401 ST-BK

2. Features ISpecifications
EZ SW P 4- Removable Hard Drive Rack
Feature
- Easy Installation With Tool-Free Design
- Plug and Play
- Fits In Any Standard 5.25 Drive Bay
- Supports 3.5 SATA 1/11 Hard Drives
- Security Key Lock Design
- LED Indicators for Power & HDD Activity
- Front Ventilation with Rear Fan for Air Circulation and Superior
Cooling
- LCD To Monitor Temperature and Fan Speeds
- Fail Alarm Warning System
Specifications
-Model
- Device Support
- Device Size
-Internal Interface
- HDD Capacity
-Material
- Dimension
: MRK-401 ST-BK
: SATA I1II Hard Drive
:35
: SATA 1111
: Upto 2TB
: Metal & Plastic
: 148 x 188 x 42mm
POWER
SATA
Featuresl Specifictions
3
3. System Requirements
Intel Pentiumll 350 MHz-compatible
Microsoft Windows 2000 XPNISTAl7
1. SATA-equipped system.
2. For SATA speeds, the system must
support SATA specifications.
Mac G3 processor & greater.
MAC as 8.6 or greater
1. SATA-equipped system.
2. For SATA speeds, the system must
support SATA specifications.
System Requirements
4

4. Parts Layout
EZ SW P 4 - Removable Hard Drive Rack
Lock
Door
~«- .L--_ Screws hole
Fan
Parts Layout
5
5. Installation
EZ SW P 4 - Removable Hard Drive Rack
1. Power down the computer and disconnect
the power cable.
(Figure S-A)
l
J
2. Dismantle the left & right side of PC cover.
(Figure 5-6)
3. Dismantle the front cover of Pc.
(Figure S-C)
J
(
.I
4. Insert the EZ Swap 4 into the 5.25 bay of the
computer. (Figure S-D)
(Figure S-A)
Installation
6

5. Tighten the screws to ensure EZ Swap 4 is secure
to the case. (Figure s-E)
6. Plug one side of SATA cable into a SATA port on
the motherboard, plug the other side into the
EZ Swap 4. (Figure s-F & s-G)
(SATA Cable)
7. Connect the 4 pin power cable to the EZ Swap 4's
power connector. (Figure s-G)
6. Installing a Hard Drive
EZ SW P 4 - Removable Hard Drive Rack
1. Use the key to unlock the EZ Swap 4 and then
open the panel. (Figure 6-A)
::.-.~ ..
::::~ .•
(Figure s-F)
2. Insert the SATA hard drive. (Figure 6-8)
3. Close the panel. (Figure 6-C)
§ O
Power Cable
SATACable
8. Reassemble the case and reconnect the power
cable of the computer. (Figure SoH)
Installation
7
o
0
o·
(Figure s-G)
4. Use the key to lock the EZ Swap 4 to fully activate
the EZ Swap 4. ( Figure 6-0)
'.
CD NOTE :
EZ Swap 4 has a power security function. When
there is no hard drive present, the EZ Swap 4 will
not power on.
Instruction
8

7. LCD Display Function
Temperature Display
Thermometer HDD Indicator
Fan State Indicator Fan RPM Fan Settings
Thermometer When critical temperatures are reached, the thermometer will flash.
Fan State Indicator When the fan is functioningproperly,the fan stateindicatorwill have a spinning
motion. When the fan isworking improperly, the fan state indicator will flash.
,
Temperature of the hard drive will be displayed in either °C and of.
Temperature Display (Press Button + and Button - at the same time to switch between 'c or
OF state.)
Fan RPM This displays current RPM of your fan.
Fan Settings There are three choices. L (Low speed/2300RPM) ,
M(Medium speed/3600RPM), H(High speed/4500RPM).
HDD Indicator When a hard drive is inserted, the HDD indicator will be lit. Activity is
shown by flickering or flashes.
Button + To increase the fan speed.
Button - To decrease the fan speed.
@NOTE:
When the temperature is over the critical safe levels of (55°C /I 131°F)
or if the fan is working improperly, an alarm will sound for 10 seconds
and can be muted by pressing any of the fan control button. The alarm
will ring every 30 minutes until the problem is resolved.
LCD Display Function
9
8. Warranty IContact
The EZ SWAP 4 comes with a 1 year limited
warranty (90 day parts). If your unit should
become defective within that time frame, please
go to http://www.vantecusa.com for information
on how to receive warranty exchange or repair.
Cosmetic defects and missing parts are not
covered under this warranty.
Pleasecheckthe contents of the unit to makesure
you received all parts. Also, check for any cosmetic
flaws. If any parts are missing or if there are
cosmetic defects, please contact theretailer from
which you purchased the unit immediately and
askfor a replacement.
Vantec Thermal Technologies
43951 Boscell Rd.
Fremont, CA 94538
tel: [phone]
fax: [phone]
website: www.vantecusa.com
-I
Copyright ©2009 Vantec Thermal Technologies. All Right Reserved.
All Registered Trademarks Belong To Their Respective Companies.
Warranty I Contact
10