VARDE OVNE Fuego 1 User manual

1
Installation— and
User guide
Varde Fuego
Revision 02

2
Congratulation on the purchasing your new stove
Varde Ovne A/S is a Danish company specialising in functional, environmentally
friendly quality stoves in attractive designs.
Index
Welcome and contents age 2
Technical specifications Fuego 1 age 3
Technical specifications Fuego 2 age 4
Technical specifications Fuego 1 Soapstone age 5
Regulations and certifications age 8
Flooring and distances age 9
Chimney age 10
Air supply age 11
Operation age 12
List of accessories age 13
Vermiculite age 14
How to choose the wood age 15
How to light and stoke a fire age 16
Maintenance age 17
Troubleshooting age 18
Spare parts age 19
Fresh air supply age 20
Installation of the AirBox (extra) age 21
Test certificate from RWE age 22
Test certificate from the Danish Technological Institute age 23
Warranty age 24

3
Model Fuego 1
Hight (mm) 993
Wide (mm) 500
Depth (mm) 405
Weight (kg) 125
Effect 3-7 w
Nominal Output 5 Kw
Heated area 30-105 m2
Efficiency 75%
Flue gas data: 5.5 g/sec, 340°C ved 20°C, 11 pa.
Combustion chamber:
(H x W x D): 260/380 x 200/300 x 260mm
Flue outlet Ø 15 cm (Mounting hight top: ~98cm)
Distance to non-flammable:
5-10cm (recommended)
Distance to flammable materials:
Rear = 20cm, Sides = 20cm, In front = 80cm
Technical Specification
Varde Fuego 1

4
Model Fuego
Hight (mm) 885
Wide (mm) 500
Depth (mm) 405
Weight (kg) 122
Effect 3-7 w
Nominel Output 5 Kw
Heated area 30-105 m2
Efficiency 75%
Flue gas data: 5.5 g/sec, 340°C ved 20°C, 11 pa.
Combustion chamber:
(H x W x D): 260/380 x 200/300 x 260mm
Flue outlet Ø 15 cm (Mounting hight top: ~87cm)
Distance to non-flammable:
5-10cm (recommended)
Distance to flammable materials:
Rear = 20cm, Sides = 20cm, In front = 80cm
Technical Specifications
Varde Fuego 2

5
Model Fuego 1 Soapstone
Hight (mm) 1014
Wide (mm) 520
Depth (mm) 410
Weight (kg) 140
Effect 3-7 w
Nominel Output 5 Kw
Heated area 30-105m2
Efficiency 75%
Flue gas data: 5.5 g/sec, 340°C ved 20°C, 11 pa.
Combustion chamber:
(H x W x D): 260/380 x 200/300 x 260mm
Flue outlet Ø 15 cm (Mounting hight top: ~98cm)
Distance to non-flammable:
5-10cm (recommended)
Distance to flammable materials:
Rear = 20cm, Sides = 20cm, In front = 80cm
Tekniske specifications
Varde Fuego 1 Soapstone

6
Important!
Before installing and lighting your new Varde
Ovne stove for the first time, we recommend
that you first take a couple of minutes to read
this installation and user guide.
Inspection of installation
It is very important that the installation is in-
spected by a qualified chimney sweeper before
the stove is used for the first time.
Regulations
All local regulations, including regulations
referring to national and European standards,
should be adhered to when installing your
stove.
Note: All Varde Ovne stoves are closed fire-
places.
The stoves are designed for intermittent
combustion and can be connected to a chim-
ney used by other fireplaces.
This Varde Ovne stove has been certified in
accordance with European Standard EN 13240,
German Stufe II and Norwegian Standards (NS),
and has therefore been proved to be an environ-
mentally friendly product.
Professional installation
We recommend that you consult with the
dealer who sold you the stove or another
competent installer, as there may be specific
things to consider during the installation. You
should also receive the applicable rules for
installing the stove and follow them.
Note:
Compulsory registration
You are required by law to register your stove with your local chimney sweeper.
Store the stove in a dry place at room temperature until installation. Moisture will damage the
stove. Be aware that an existing chimney is not necessarily effective enough for a new modern
stove.
EC declaration of confirmaty.
MANUFACTURER
Name: Varde Ovne A/S
Adress Kongevej 246, DK-6510 Gram, Danmark
Pejse Inspektion
Name: RWE Power AG
Adress: Dürner strasse 92, 50226 Frechen, Germany
Notified body Number: 1427
Product Varde Fuego 1 and 2
roduct type Fuego
Type code Wood-burning stove, suitable for intermittent combustion
Standard Construction products (89/106/EEC/), standard used: EN
13240
Application Residential Heating
Fuel Wood
Special conditions None
CE-Markning
Issued 2012
Nominal Output 5 kW
Fuel type Wood
Fluegas temperature 340 °C
Efficiency 75 %
Co-release 0,08 %

7
Flooring
If the floor on which the stove is to be placed is flammable, the floor must be covered with a non
-flammable material, such as a steel or glass plate, floor tiles or artificial slate, covering an area
of at least 15 cm on each side of the stove and at least 30 cm at the front. For the front, howev-
er, we recommend 50 cm. In addition, the floor construction must be capable of carrying the
combined weight of stove and chimney.
Installation distances
If the walls are made of a non-flammable material, the stove can be placed right up against the
wall. We nevertheless recommend a minimum distance of 5 – 10 cm to allow for cleaning behind
the stove. The cleanout door must be accessible.
Optimal combustion requires a constant supply of fresh air, which is something you have to keep
in mind. The best way to provide a steady flow of fresh air is by installing one or two air vents in
the room where the stove is situated (one on each side of the room).
Installation of wood stoves – distance to flammable material
Stoves must always be placed with the following minimum distance between the outer edge of
horizontal/vertical flue pipes and any flammable material: 225 mm.
Weight Steel With Soa-
pstone
Varde Fuego 1 125 kg 145 kg
Varde Fuego 2 122 kg -
According to current rules and regulations,
the stove must comply with the following
minimum distances from flammable walls
and materials:
Sides : 0 cm
Rear : 0 cm
Distance to furniture : 80 cm
A 200 mm C 200 mm
B 225 mm D 800 mm
Varde Fuego

8
The chimney
Always use a chimney with a diameter of at least 15 cm. This corresponds to a bore of 175 cm2.
Make sure the chimney is of sufficient height, that it draws well and that the smoke does not
bother your neighbours.
We recommend that you fit your chimney with a damper, allowing for draft control. This may
prove particularly important on windy days. Note: the damper must never shut off draught com-
pletely – always allow at least 20 cm2 free passage through the chimney.
With nominal usage the stove has tested a flue gas flow of 5.5 g/second, with a flue gas temper-
ature of 340°C and at a room temperature of 20°C.
Varde Ovne stoves are always fitted with a smoke deflector plate which redirects smoke to
make its way to the chimney as effective as possible. This ensures that the heat from the smoke
is emitted inside your home rather than outside it. The smoke deflector plate is moveable and
placed in the combustion chamber. You should make sure that it is pushed all the way back
against the back wall of the combustion chamber.
Draught conditions
Consult your local chimney sweeper about how best to adjust the draught in your chimney.
Height of chimney
If in doubt, contact your local chimney sweeper. He will be able to inform you of the correct
height.
Connection of Flue pipe
Information about the new cast iron adapter, part no. 134
Your stove is equipped with the new cast iron adapter from Varde Ovne. The adapter is suitable
for standard flue pipes with an inner diameter of 150 mm.
It is now possible for you to make a condensate drain hole in the adapter if your stove is directly
connected to a steel chimney:
Carefully punch a chisel or the like through the bottom of the outer groove (at the
arrow mark). This way you can establish a condensate drain hole in the adapter if
Arrow mark for drain hole. Now the condensate drain
hole is ready.
Carefully punch a hole with a
chisel or the like.

9
Fresh air supply
A continual supply of fresh air is required in the
room in which the stove is situated. This can be
achieved by installing ventilation grids in the walls
and making sure they cannot be blocked. The
quantity of air used for combustion is approx.
14 m³/h.
Ignition air
When the upper low handel is pushed
towards left you open the ignition air.
This option is only used for lightning up.
As soon as the fire has a good grip—
rembermber to close again.
Tertiary air
Constantly added air, which makes the
stove burn even cleaner while lowering the
content of tar and soot in the combustion
process to an absolute minimum. At opti-
mum combustion settings, glass and com-
bustion chamber will be burnt completely
clean, and the amount of ash remaining
will be minimal.
Overheating
Occurs if too much wood is placed in the
stove or if too much air is added to the
combustion process.
Combustion air
damper
ush the damper
towards the right to
open.
Combustion /secondary air
re-heated air for the combustion process
(secondary air). The amount of air can be
adjusted according to needs. A high level
of chimney draught requires a lesser in-
take of combustion air.
Combustion air
damper
ush the damper
towards the left to
close.
Max height of firewood

10
How it works
The shaking grate
The shake grate is situated at the bot-
tom of the combustion chamber. By
pushing the lower lever (1) to left and
right, the ashes will be pushed into the
ash pan.
Shake grate lever (1)
The shake grate is operated with the
lower lever.
Ignition air
Lighting your Varde Ovne
stove
ush all air supply levers (1,
and 3) to the right as far
as they go. Your stove is
now in ignition position.
Once the fire has caught
properly, push lever 1 to the
left as far as it goes. Wait
until the fire burns evenly,
and then push lever to the
left as far as it goes. Your
stove is now in operating
position. In the operating
position you adjust the fire/
heating by shifting the posi-
tion of lever 3; to the right
to let in more air and to the
left to shut off the air.
Combustion Air Throttel
The Handle is situated on the
right side, on top of the sto-
ve. ush the Throttel to-
wards right for Air Access.
3
2
1
1
2