Vario Revolution User manual
Revolution
Quick Start Guide
Batteries ..............................................
Inserting the module ......................
Power on/off ......................................
Removing the module ...................
Changing programs .......................
Sleep mode .......................................
Comms mode ..................................
90 day money back guarantee ..
Warranty .............................................
Troubleshooting ..............................
Contact us .........................................
2
3
3
3
4
4
4
5
5
6
6
June 2019
Batteries
Remove the tab from the battery.
Allow to aerate for at least 1 minute.
Remove the battery door from the module. (1)
Insert the battery into the battery door (you can use the magnet on the
end of the cleaning brush provided). (2)
Reinsert battery door to the module.
Getting Started
12
34
2
Inserting the module
Place the module into the module recess in the silicone mould with
the diamond logo facing out.
Gently press on the logo until you hear the retention points click into
place.
Do not press multifunction button while inserting the module.
Power on/off
Press the multifunction button until you hear “Welcome to Vario”.
To power off, press and hold the multifunction button until you hear
“Goodbye”.
Removing the module
With your index inger supporting the bottom of the silicone mould,
use your thumb to gently lex the top of the mould backwards.
Carefully dislodge the module.
Battery Door
Multifunction Button
3
Changing programs
Press the multifunction button to cycle through the programs.
When you turn on your Vario Revolutions for the irst time, or after
replacing the battery, the irst program in the cycle is automatically
selected.
When you turn on your Vario Revolutions again, the last program used is
automaticallyselected.
Sleep mode
Your Vario Revolutions will automatically go to sleep after a predetermined
period of inactivity. You will hear “Sleep in two minutes” before entering
sleep mode.
Press the multifunction button once to reset the timer and delay sleep
mode.
Press the multifunction button to awaken from sleep mode.
Comms mode
If you have comms mode, you can use a neck loop to connect your Vario
Revolutions to your smart device, mp3 player or walkie talkie.
Cycle through the programs until you hear “Comms” and follow the
instructions supplied with your neck loop.
Note: Your Vario Revolutions use size 312 air zinc batteries. All air zinc
batteries deteriorate over time regardless of usage.
4
90 day money back guarantee
Your Vario Revolutions are covered by a no quibble 90 day money back
guarantee. Should you wish to return any or all of your Vario products,
call our helpline on 01737 45 22 00.
Warranty
In the event of malfunction during the first two years of ownership,
Vario will repair or replace your Vario Revolutions as needed with no
labour or material charge.
This warranty excludes loss or damage caused by misuse or negligence.
The warranty is considered void if any parts have been altered, changed
or if service has been performed by any non-authorised party.
5
Troubleshooting
Try the following if you find that your modules won’t turn on, emit a
buzz or whistle, or the sound is distorted:
1. Replace the battery and make sure that it is aerated for a minimum of
one minute before insertion.
2. Ensure that the battery and battery door are correctly inserted into
the module.
3. Make sure that the module is securely situated in the silicone mould.
4. Ensure the silicone moulds are clear of blockage.
If you have any queries regarding your
Vario Revolution modules, call our
helpline on
01737 45 22 00
or email us at
Ottraco Ltd
Unit A6
Redlands
Coulsdon
Surrey
CR5 2HT
VAT No: 826 1272 42
Registered in England No: 4763493
6
Table of contents
