Variquest Design Center 2300C Manual

VariQuest® Design Center 2300C Unpacking and Setup Instrucons
Step 1: Unpack the box and check the contents
The VariQuest Design Center 2300C (DC2300C) and its accessories
are packed in a cardboard carton with foam padding for
protecon during shipment. Carefully unpack the system and
keep the packing materials for future use.
Verify the items in the box. If an item is missing or appears to be
damaged, contact your authorized VariQuest Dealer immediately.
Included in the box:
- All-in-one Touch PC - Power Cord - Keyboard & Mouse
(oponal*)
*The DC2300C is equipped with a touch-enabled screen. It is not
necessary to connect the oponal keyboard and mouse in order
to use the VariQuest Design Center Soware.
Step 2: Adjust the lt
The stand allows you to lt the Design Center 2300C to your
personal preference.
Step 3: Connect the power cord
A. Connect the female end of the power cord into the power
supply brick (1).
B. Connect the other end of the power cord to an outlet (2).
C. Connect the round end of the power cord to the power supply
connector on the back of the DC2300C (3).
(connued on reverse)
1
2
3

Step 4: Connect the VariQuest ® devices
Connect peripheral devices, such as the VariQuest Visual &
Kinesthec Learning Tools, to any of the USB ports on the
DC2300C. The below image shows the locaon of components
and ports.
When connecng the VariQuest Perfecta® Series Printer, please
refer to the setup and installaon instrucons provided with the
printer.
Drivers and ulies needed for VariQuest devices are preinstalled
on the DC2300C. If you are connecng other devices, refer to the
user’s guide for the devices you are connecng for instrucons on
installing any required drivers.
Step 5: Power on the Design Center 2300C
Press the Power Buon located on the middle-le side of the
unit (1).
When you turn on power to the DC2300C, the VariQuest Design
Center Soware is launched automacally. Refer to the VariQuest
Design Center Soware User’s Guide for details about using the
soware with each of the VariQuest devices.
Technical Support
For technical assistance, please contact your authorized
VariQuest dealer or the VariQuest Technical Support team:
 Email: techsuppor[email protected]
 Phone: [phone]
1Power Buon
2Hard Disk Drive Acvity LED
3USB 3.0 Port, Fast-Charging
4USB 3.0 Port
5Headset/Line Out Jack
6Microphone/Line In Jack
7SD Media Card Reader
(Oponal)
8Opcal Disc Drive Eject Buon
9Opcal Disc Drive Acvity LED
10 Tray-Load Opcal Disc Drive
1Power Cable Retenon Loop
2Port Cover Security Screw
3Serial Port (Oponal)
4PS/2 Keyboard Connector
(Oponal)
5PS/2 Mouse Connector
(Oponal)
6Power Connector
7DisplayPort Connector
8(2) USB 3.0 Ports
9(2) USB 2.0 Ports With Wake-
Up Funconality
10 RJ-45 Gigabit Ethernet Port
11 Stereo Audio Line Out
Rev C - Y2900407 01/18
© 2018 Varitronics, LLC. All Rights Reserved.