Varytec easy scan 250 II User manual

User’s manual
Easy Scan 250 - II

2 / 5
Table of content
1. Safety instructions........................................................................................................................... 3
2. Introduction..................................................................................................................................... 4
3. Technical data................................................................................................................................. 4
4. Power Up........................................................................................................................................ 4
5. Channel........................................................................................................................................... 4

3 / 5
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle.

4 / 5
2. Introduction
Thank you for purchasing the easyscan 250 II.
Before you can start, you should read this manual carefully.
3. Technical data
DMX: 512
Voltage: 220V – 250V
Lamp: Halogen lamp w. Socket 250W 24V
Color temperature 3250K
Socket: GX 5,3
Motors: 3 Stepper motors
Usitt DMX: 512
channels: 5 DMX channels
noise: 70db
Weight: 12kg
4. Power Up
When you power up the item it will set up itself to be in the self test mode. To control the Easy Scan
250 II by DMX you have to set up a DMX address by using the binary system.
5. Channel
chanel Function Value DMX
1 Pan 0 – 255
2 Tilt
0 – 255
3 Color
0-22 White
23-40 Red
41-62 Lightblue
63-85 Green
86-104 Yellow
105-126 Orange
127-145 Pink
146-166 Cyan
167-255 Rotation
4 Gobo
0-14 Closed
15 – 31 Open
32 – 46 Fantasy
47 – 65 Stars sm.
66 – 79 Sun
80 – 96 Strip
97 – 109 Triangle
110 – 126 Windmill
127 – 144 Star
145 – 161 Circle
162 – 175 Flower
176 – 191 Window
192 – 255 rotation
5 Goboshake
0 – 255

5 / 5
Importeur:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
[email protected]