Philips SmartBright Dual Select Waterproof User guide

Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
Type
Dimension
L
A
Dimensions (mm)
90
78
WT071C
115
80
WT072C
Inrush current
Imax
Tref [μs]
Drivers / MCB 16A type B [max.] 36 31
Drivers / MCB 10A type B [max.] 22 19
Drivers / MCB 16A type C [max.] 61 52
Drivers / MCB 10A type C [max.] 37 32
Max. Nr of products
L600 L1200 L1500
222 240
14.2 9.08
175
72
45
122
74
15
SmartBright Dual Select Waterproof
Default 4000K;
For 4000K, 6500K; higher lumen output at 5000K.
*1
*2
4000K
5000K
6500K
Switchable
High Low
Switchable
a)
x2
b)c)
A
Signify New Zealand Limited
123 Carlton Gore Road
Newmarket,Auckland 1023
New Zealand
Tel:[phone]
Signify Australia Ltd
65 Epping Road
North Ryde NSW 2113
Toll Free number:1300 304 404
www.signify.com
Lumen Output(lm)
1265/2000
2400/4000
3640/6000
1265/2000
2400/4000
3640/6000
Default “High” as the high wattage setting, switch to “Low” for the low wattage.
*3
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/LED

This product contains a light source of energy efficiency class: E
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Diconnect before serving, Luminaire has basic insulation between Low Voltage supply and control conductors.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the
instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its
entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of
torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembledbolts need to be
retightened again to the required torque specification to assure maximum strength over lifetime.
foil needs to be removed
Diagonal mounting
A
960-1170
660-870
A
L600
210-350
A
Mounting distance
30
45
8
82
Replacement of Silicone Plug(optional)
New Silicone Plug
Ø12-14mm
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/LED