VAST V-BT100A User manual

WWW VASTiNT COM..
Initial Pairing to your Long Range Bluetooth Amplifier
Here We take the iPhone for example, Other Bluetooth enabled devices will follow the Bluetooth settings
instruction
,
.
In touch home page,
Open "Settings"
Select "Bluetooth"
Open "Bluetooth"
Search devices,
Select the "VAST"
Enter " ”t PIN code: 0101
1234Connected OK
It allows you to wirelessly stream audio from your portable device (iPod, iPad, iPhone, iPod Touch Bluetooth
unit etc.)To your Kitchen, Bathroom and every room ....
It more suitable install at Garden,Balcony etc, Which can connecting with our outdoor speaker and ceiling
speaker.
Control your music with freedom, no need to be connected to a docking station.
Simply use your smart device to control on/off, volume, tracks etc.
The built-in amplifier auto-senses a Bluetooth sync to working mode or Stand-by mode.
,
Thanks for choosing BT-HiFi system!
Before operating this unit, please read these instructions completely and save them for future use.
Visit our website for more information.WWW.VASTINT.COM Let's Enjoy Life Together!
VAST INTERNATIONAL | VAST ELECTRONICS
Long Range Bluetooth Amplifier
VAST INTERNATIONAL | VAST ELECTRONICS
V BT100A-
Tips:
If you move out of signal coverage or turn off the Bluetooth function on your iPad, iPod touch, iPhone, or any
other Bluetooth enabled device, the will disconnect. To reconnect your
devices, simply access the "Settings" icon on the Home Screen of your devices, Tap the "Bluetooth On" option,
select the "VAST" device, No need enter the PIN code.
Long Range Bluetooth Amplifier
Instructions ( Disconnecting / Changing Connected Device)：
If you want to switch from your iPad, iPod touch iPhone other Bluetooth enabled to an others device
Please kindly follow below steps:
1. Enter to Bluetooth setting and turn the Bluetooth function to "OFF".
2. The can be connected to a different device now.
3. Follow the directions in "Initial pairing to your Long Range Bluetooth Amplifier" connect to different device.
,,
Long Range Bluetooth Amplifier

Thanks for choosing BT-HiFi system!
Before operating this unit, please read these instructions completely and save them for future use.
Visit our website for more information.WWW.VASTINT.COM Let's Enjoy Life Together!
VAST INTERNATIONAL | VAST ELECTRONICS
AMP Technical Specifications
Bluetooth Technical Specifications
Power Requirements: AC Supply: AC100-240V, 60/50Hz, 1A | DC Input: DC12-20V @ 5A
Total Quiescent Current: Typical 40mA
Frequency Response: 20Hz to 20KHz (± 3dB)
Speaker Impedance: 8 ohms - 4 ohms minimum
Output Power(RMS): 2CH*45W
Bluetooth System: Bluetooth V4.0
Frequency Range: 2.40GHz-2.4832GHz (ISM Band)
RF Channels: 79 Channels for USA, Japan, and Europe
Range: 60 to 130 Metres
ID Name: VAST
Security: 4-Digit PIN Code
Version
Receiver sensitivity: -91 dBm
"0101”
D
A
B
C
D
E
DC Input: DC12-20V
Speaker Terminals Left RED(-- )
Speaker Terminals(-- )Left BLACK
Bluetooth Antenna
Packing and Accessory:
1pc (V-BT100A)
1pc (V-P190) power adaptor
Long Range Bluetooth Amplifier
B
A
C
D
E
F
F
Speaker Terminals RED(-- )Right
Speaker Terminals(-- )Right BLACK
+
-
+
-
IOS
AC Supply
Let's Enjoy Life Together!
+
-
+
-
---
+
-
-- +
-
--
+
---
+
---
+
---
+
---
Installation Dimention
138 0mm.
93 6mm
.
WWW VASTiNT COM..
Long Range Bluetooth Amplifier
VAST INTERNATIONAL | VAST ELECTRONICS
V BT100A-