Venstar Programmable Thermostat
T2900
STANDARD FEATURES:
•Up to 3-Occupied, 1-Unoccupied periods per day, with copy command for easy programming
•Light Activated occupied period (defeatable)
•Accepts humidification/dehumidification control module (Venstar part number ACC0430)
•Auto changeover, 3-stage heat, 2-stage cool for use with gas/electric, heat pump, electric & hydronic heat
•Configurable for manual changeover, also configurable programmable or non-programmable
•Adjustable deadbands and timers
•Control to, or monitor a second remote sensor
•Can average up to 8 (wired or wireless) remote sensors
•3 configurable outputs for maximum flexibility (MISC1, MISC2, MISC3)
•Extra 6th and 7th outputs (beyond our standard thermostat)
•Programmable output (control by time, temperature or internet/phone control)
•Energy Watch keeps Track of energy use by tracking heating and cooling hours
•Smart Fan (keeps the fan from running during unoccupied periods)
•Smart recovery
•Pre-occupancy fan purge
•Display shows both heating an cooling setpoints and room temperature simultaneously
•All programming and setpoints stored in non-volatile memory, and are never lost in power failure
•Service filter and service UV lamp indicators
•Red/Green LED shows whether thermostat is calling for heating or cooling
•5-minute compressor time guard and adjustable cycle limit, both defeatable for servicing equipment
•Outdoor sensor ready with high and low temperature of the day
•Thermoglow backlit electro-luminous display and backlit color coded keys and legends
•Accepts accessory IR Remote Control system (Venstar part number ACC0431)
•Accepts accessory EZ Programmer (Venstar part number ACC0432)
•For accessory locking cover use (Venstar part number ACC0620)
MODEL: T2900 QUANTITY: DATE:
JOB NAME:
LOCATION:
BUYER: BUYER P.O.#:
ENGINEER:
