Venturer SVP580 User manual

5-DVD/CD PLAYER
OWNER'S MANUAL
CD PLAYBACK
CD-R
R
VIEWER
4
VENTURER SVP580

E - 1
Important Safety Instructions
CAUTION
Thelightningflashwithanarrowheadsymbol,within
theequilateraltriangle,isintendedtoalerttheuserto
the presence of uninsulated "dangerous voltage"
withintheproduct'senclosurethatmaybeofsufficient
magnitudetocauseanelectricshock.
Theexclamationpointwithintheequilateraltriangleis
intendedtoalerttheusertothepresenceofimportant
operatingandmaintenance(servicing)instructions
inthisownermanual.
WARNING:TOREDUCETHERISKOFELECTRIC
SHOCK,DONOTREMOVECOVER(ORBACK).NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICINGTOQUALIFIEDSERVICEPERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD,DO NOT EXPOSETHIS
APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENTELECTRICSHOCK,
MATCH WIDE BLADE OF PLUG
TOWIDE SLOT,FULLY INSERT.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, rent copyrighted material
without permission.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
DVD video discs are copy protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
On Placement
• Do not use the Unit in places which are extremely hot, cold, dusty, or humid.
• Place the Unit on a flat and even surface.
• Do not restrict the air flow of the Unit by placing it in a place with poor air flow, by covering it with a cloth, or
by placing it on carpeting.
FCC Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesirable
operation.
On Safety
• When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
• When you are not going to use the Unit for a long period of time, disconnect the AC power cord.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
Unit. When there is condensation inside the Unit, the Unit may not function normally. Let the Unit stand for
1 to 2 hours before turning the power on, or gradually heat the room up and dry the Unit before use.
WARNING:
• Should any trouble occur, disconnect the AC power cord and refer servicing to a qualified technician.
• Do not place anything directly on the top of the Unit. Damage to the Unit can result.
This product
contains a low
power laser device.
The symbol for
Class II (Double
lnsulation)
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM

E - 2
Important Safety Instructions
1. Read Instructions - All the safety and operating instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart or stand that is
recommended by the manufacturer.
6A.An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not interfere with
its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-in installation, such as a book case
or cabinet, that may impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means
of an appliance are not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
14. Power Lines - An outdoor antenna should be
located away from power lines.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
16. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left
unused for a long period of time.
17. Object and Liquid Entry - Care should be taken so that objects do not fall, and liquids are not spilled,
into the enclosure through openings.
18. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
19. Servicing - The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.

E - 3
Table of Contents
Playing MP3 and Picture File Disc......... 21-22
PlayingaMP3filedisc............................................21
PlayingaPicturefiledisc.......................................22
PlayingaMP3/Picturefiledisc...............................22
CustomizingtheFunctionSettings ........23-28
LANGUAGEsetting..................................................23
OSD(OnScreenDisplay)Menu........................23
Subtitle................................................................23
Audio...................................................................23
DVDMenu............................................................24
VIDEOsetting......................................................24-26
TVShape..............................................................24
TVSystem............................................................25
VideoOutput.......................................................26
AUDIOsetting..........................................................26
DigitalOut...........................................................26
RATINGsetting.................................................27-28
Password/Parentallock ....................................27
LoadFactory.......................................................28
LanguageCodeListforDiscLanguage.......29
Maintenance................................................30
CleaningDisc..........................................................30
CleaningtheUnit...................................................30
ImportantNote.......................................................30
Trouble Shooting Guide ........................ 30-31
Important Safety Instruction ..................... 1-2
Disc Formats ................................................ 4
Before You Start ........................................... 5
Usingtheremotecontrol..........................................5
Parts and Functions .................................. 6-8
RemoteControl.......................................................6-7
FrontandRearPanel..................................................8
Display ......................................................... 9
DisplayInformation...................................................9
Setup ..................................................... 10-12
ConnectingyourTV............................................10-11
Connectinganothersource....................................11
TurningontheUnitandTV ......................................12
Powercordconnection...........................................12
Playing a Disc ....................................... 13-15
PlayingDisc.............................................................13
Pausingplayback(stillmode)...............................13
Stoppingplayback.................................................13
Toskiptoadifferenttrack......................................13
FastFoward/FastReverse.....................................14
Slow-motionplay....................................................14
Skip(Forward/Reverse)..........................................14
Zoomingintoanimage .........................................14
Angleselection.................................................14-15
Audioselection.......................................................15
Subtitleselection....................................................15
MicrophoneMixing(KARAOKE)..................15
Special Functions ................................. 16-18
Displayfunction(DVD)..........................................16
Locatingaspecifictitle .........................................17
Locatingaspecifictitle/chapter/track..................17
Locatingaspecifictime.........................................18
Anglesetting...........................................................18
Audiosetting..........................................................18
Subtitlesetting.......................................................18
CD/DVDprogrammablememory ...............19
DVDprogrammablememory.................................19
Title/Chapterprogrammedplayback.............19
CDprogrammablememory...................................19
Trackprogrammedplayback..........................19
Repeat Playback ........................................ 20
Repeatingatitle/chapter(DVD)............................20
Repeatingasingletrack/wholedisc/alldiscs(CD)
.................................................................................20
Repeatingaspecificsection(DVD)......................20

E - 4
The Unit can playback.
Region Management Information
Region Management Information: This Unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does
not correspond to the Region number of this Unit, this Unit cannot play that disc.
The region number of this Unit is 4.
Disc Function or Operation that is Not Available
When the symbol appears on the TV screen, it indicates that the function or operation attempted is not
available at that time. This occurs because the DVD disc manufacturer determines the specific functions.
Certain functions may not be available on some discs. Be sure to read the documentation provided with the
DVD.
4
T
Chapter 1 Chapter 1Chapter 2 Chapter 2Chapter 3
DVDs
[12cm(5”) disc]
Notes on Unauthorized Discs
You may not be able to play back some DVD discs on this Unit if they were purchased from outside your
geographic area or made for business purposes.
Title, Chapter and Tracks
• DVDs are divided into “titles” and “chapters”. If the
disc has more than one movie on it, each movie would
be aseparate “title”.“Chapters”are sectionsof titles.
• Audio CDs are divided into “tracks”. A “track” is
usually one song on an Audio CD.
Note :
• Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them,
but some do not.
Track 1 Track 2 Track 3 Track 4 Track 5
Icons Used on DVDs
Sample lcons Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
2
2
2
1. English
2. French
1. English
2. French
Notes:
• ThisUnit supports 2-channel (L/R)audio and5.1ch (Multi-channel) MPEG Audio 1/2 (only whentheDIGITAL
AUDIO OUT coaxial jack is used for connection). It does not support 7.1 channel MPEG Audio Version 2.0.
• When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic
images will not be shown.
Disc Formats
Audio CDs
[12cm(5”) disc]
Compatible

E - 5
BeforeYou Start
To install Batteries
1.Open the battery door.
Battery Replacement
When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will
need to replace the batteries.
Notes:
• If the Remote Control is not going to be used for a long time, remove the batteries to avoid damage caused
by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
2.Insert two "AAA" or UM-4 size batteries.
Using the Remote Control
• Point the Remote Control at the REMOTE SENSOR located on the Unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 26 feet (8 meters).

E - 6
Parts and Functions
(Continued on next page)(Continued on next page)
(Continued on next page)(Continued on next page)
(Continued on next page)
Remote Control
1) OPEN/CLOSEbutton
Use to open or close the disc tray.
2) DISC SKIP button
To change next available disc.
3) Number (0 - 9) and (+10) buttons
Use when creating programs, and entering a
parentallevel password. To select numbers over9,
press +10 button and then the second no. for
example, to enter 18, press +10 and then 8.
4) MEMORYbutton
Enterthenumberofaselectedchapterortrack.
5) SETUPbutton
Selects the SET UP menu screen.
6) / CURSOR buttons
Use to highlight selections on a menu screen
and adjust certain settings.
7) SLOWbutton
Perform slow reverse playback of DVDs.
8) / SEARCH buttons
SEARCH:Fast reverse playback.
SEARCH:Fast forward playback.
9) PREVbutton
Press PREV button to go back to previous
chapters/tracks.
10) STOP button
Stop playback.
11) GOTObutton
Skip directly to a specific location on a DVD
disc.
12) P. SCAN/CVBS button
Changing YUV output to Progressive Scan
Video mode or back to CVBS mode.
13) DISC 1 -5 select buttons
14) ANGLE button
Switch the camera angle of the video
presentationwhen scenes with multiplecamera
angles are recorded on a DVD.
15) SUBTITLE button
.....
Select one of the subtitle languages
programmed on a DVD.
16) CLEAR button
Clear input selections and cancel certain
playback functions.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

E - 7
17) STANDBY / ON button
Turns the Unit on and puts it in standby mode.
18) / CURSOR buttons
Useto highlight selections on a menuscreen and
make adjust certain settings.
19) MENU button
Open and close DVD's menu.
20) ENTERbutton
Confirm selections on a menu screen.
21) SLOW button
Perform slow forward playback of DVDs.
22) NEXT button
PressNEXT buttontoadvancetochapters/tracks.
23) PLAYbutton
Start playback.
24) PAUSE button
Pause playback, frame advance.
25) ZOOMbutton
Zoom into an image.
TV MODE button
In stop mode, select whether to output the video
signal.TVshows"AUTO"whichmeansoutputsignal
depends on DVD disc (either NTSC or PAL). TV
shows "PAL" or "NTSC" which means output signal
fixed to PAL or NTSC.
26) RETURN button
Return to the normal operation after using the
SETUP menu.
27) AUDIObutton
Selectoneoftheaudiosoundtracksprogrammed
on a DVD or selects the audio output mode on a
AUDIO CD.
28) DISPLAYbutton
Change disc status information displayed on the
TV.
29) REP DISC button
Repeat chapter or title of a DVD.
Repeat single track or whole CD.
30) REP A-B button
Perform point-to-point repeat playback on a DVD
or CD.
Parts and Functions
Remote Control
(Continued on next page)(Continued on next page)
(Continued on next page)(Continued on next page)
(Continued on next page)
17
18
19
20
21
22
23
24
25
26
27
28
29
30

E - 8
Rear Panel
1) MIC 1/MIC 2 INPUT JACK
Connect the microphone.
2) MIC VOL (microphone volume) control
Adjust the microphone volume level.
3) 5 Disc tray
Open or close tray by pushing button. Place
discs on the disc trays, label side up.
4) POWERindicator
When the Unit is turned on by pressing the
power button, the light will be on. If you press the
STANDBY/ON button on the remote control, the
Unitwillturnoff andgointostandby mode.Thelight
will be off.
5) Powerbutton
Turn the power on or off.
6) STOP button
Stop playing a disc.
14) S-Video output jack
15) VIDEO OUT jack
16) COMPONENT VIDEO jacks (Y, PB/CB, PR/CR)
Front Panel
7) PAUSE button
Pause playback, frame advance.
8) PLAY button
Press to start or resume playback.
9) SKIP buttons
PressSKIP buttontogobacktopreviouschapters/
tracks.
PressSKIP buttontoadvancetochapters/tracks.
10) Remote Sensor
Receive the remote control unit signals.
11) DISC 1 - 5 indicators
12) (disc skip) button
To change next available disc.
13) (open/close)button
Use to open and close the disc tray.
Parts and Functions
Note:
Screen saver - If no button is pressed within 2 minutes, the screen save function will activate, If you want to return
to the normal screen, press any button.
17) Power cord
18) AUDIO OUT (L/R) jacks
19) DIGITAL AUDIO OUT jack
1 2 3 4 5 6 7 8 10 12 13911
14 15 16
18 1917

E - 9
Region (Local) Number Error Indicator
Iftheregion(local)numberofthediscthatyouattempttoplaydiffersfromtheregionnumberoftheUnit,"InvalidRegion"
appears on the TV screen. (The disc cannot be played).
If no disc is loaded
whentheMainUnit
is switched on.
Tray open
Tray closed
Loading
Stopped
Playing
Paused
Fast forward
Fast reverse
Repeat A - B
Remarks
"No Disc" appears when the tray is closed and:
1)There is no disc in the tray.
2)The disc type is not playable in this Unit.
3)The disc is not loaded correctly (upside-down, etc.)
The display changes to show
other indicators.
Freezestheimageonthescreenorpausesaudioplayback.
The display changes to show other indicators.
Repeat a specific section.
The operation is not permitted by the DVD Unit or the
disc.
TV Screen
No Disc
x 2
x 2
Loading...
Display
Display Information
The DVD displays the information shown below on the TV screen and on the Unit's DVD display depending
on the operation status.
Display Examples
Close
Play
Pause
Rep A- Rep A-B
Stop