Veradek Outdoor Corten Series User manual

Corten Flat Pack Planters
corten series
corner box
instructions

3
parts and
components
27x
Bolts
14x
Floating
Nuts
1x
Allen
Key
13x
Wing
Nuts
Soft
Working
Surface
Not Included
2x
Outside
Panels
2 x Outside Panels
2x
Inside
Panels
2 x Inside Panels
2x
Side Panels
2 x Front Panels
1x
Bottom Panel
Long
2 x Front Panels2 x Outside Panels
1x
Bottom Panel
Short
2 x Inside Panels2 x Front Panels

4
aention:
* In transit, the floating
nuts may become dislodged.
They can be easily
reinstalled by snapping
them back into place.
*

5
part a
Remove the styrofoam from
all of the panels —do not
throw them away, you will
need these later.
Remove the styrofoam from all of the panels — do not throw them away, you will need these later.
2 x Front Panels
2x
Outside
Panels
2x
Inside
Panels
2x
Side Panels
14x
Floating
Nuts

6
part b
b.1: Fasten 1 Outside
Panel to the Side Panel
using the nuts and bolts
provided.
Ensure that the bottom
holes are facing downward.
b.2: Fasten the Inside
Panel to the Side Panel
Ensure that the bottom
holes are facing downward.
Hand tighten only.
4x
Bolts
4x
Wing Nuts
1x
Outside
Panel
2 x Outside Panels
1x
Inside
Panel
2 x Inside Panels
1x
Side Panel
2 x Front Panels

7
part b
complete

8
part c
c.1: Fasten 1 Outside
Panel to the Side Panel
using the nuts and bolts
provided.
Ensure that the bottom
holes are facing downward.
c.2: Fasten the Inside
Panel to the Side Panel
Ensure that the bottom
holes are facing downward.
Hand tighten only.
4x
Bolts
4x
Wing Nuts
1x
Outside
Panel
2 x Outside Panels
1x
Inside
Panel
2 x Inside Panels
1x
Side Panel
2 x Front Panels

9
part c
complete

10
part d
Attach both
sections together.
Hand tighten only.
4x
Bolts
4x
Wing Nuts

11
part d
complete

12
part e
Flip the body over so the
bottom panel holes are
facing up.
Connect the bottom panels
to the main body. Screw
bolts into floating nuts
and tighten.
14x
Bolts
1x
Bottom Panel
Short
2 x Inside Panels2 x Front Panels
1x
Bottom Panel
Long
2 x Front Panels2 x Outside Panels

13
part f
Flip the planter upright.
Tighten all nuts and
bolts with the supplied
allen key.

14
part g
Fasten bottom panel long
to bottom panel short.
Tighten with the supplied
allen key.
1x
Bolt
1x
Wing Nut

15
part h
Place foam back into the
panels. The styrofoam acts
as insulation against
extreme heat and cold.

16
complete

17
assemble.
arrange.
transform.
your living
space
extended.

01
03
06
07
08
09
02
05
04
01 Corner Box ― 02 Round Bowl ― 03 Cube ― 04 Long Box ―
05 Garden Bed ― 06 Window Box/Railing Planter ― 07 Pedestal ―
08 Span ― 09 Square Bowl

19
Introduce rich, warm color and timeless aesthetic to your
home with Veradek Outdoor Corten Steel rusted planters.
Craed from thick-gauge, fully seam-welded Corten Steel,
these planters are crack-proof and designed to be le
outdoors year-round in both commercial and residential
seings. Like a ne wine, Corten Series planters develop a
protective rust patina that matures and deepens over time.
Questions? Email inf[email protected]
Check out more Corten Steel Series products at veradek.com
Share your creations with #myveradek
about the
corten steel series

meet you
outside.