Verefa V60M Pro User manual

User Manual
Please read the user manual
carefully before use and keep it properly.
V60M Pro

Welcome to use the Verefa robot vacuum cleaner. We hope
you can have a pleasant experience!
If you have any questions or suggestions, discover our
contact information at the bottom of the device to contact us,
and we can provide you with the support you need.
Welcome
* Specific product details may differ from those shown here.

1. Safety Instructions
2. Product Overview
3. Installation
4. Operating Instructions
5. Maintenance and
Troubleshooting
6. Declaration
Important Safety Instructions
2.1 What's in the Box
2.2 Product Anatomy (Including Buttons
and Indicators)
3.1 Important Tips Before Use
3.2 Get started
4.1 Main Functions
4.2 Mopping function
4.3 Network Functions
4.4 Other Functions
5.1 Routine Maintenance
5.2 Troubleshooting
5.3 FAQs
Basic Parameters
Energy Saving and Battery
Customer Service
01
04
05
09
09
13
15
17
18
20
26
29
31
32
34
Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)
Before using the product, follow these basic safety precautions:
・ Read everything in the manual carefully and use the product according to the instructions in the
manual.
・ Keep the manual for future reference.
・ If you need to transfer the product to a third party, please attach the manual with the product.
・ Any operation that does not conform to the manual may result in serious personal injuries or
damage to the product itself.
・ If the manual is missing, please contact the local dealer or our customer service to obtain the
electronic version.
When using an electrical appliance, basic precautions should always be followed, including the
following :
WARNING – To reduce the risk of fire, electric shock, or injury :
・ This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
・ Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
・ Do not use outdoors or on wet surfaces.
・ Do not allow to be used as a toy. Close attention is necessary when used by or near children.
・ Use only as described in this manual. Use only manufacturer’s recommended attachments.
・ Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a service center.
・ Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
・ Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
・ Do not handle plug or appliance with wet hands.
・ Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce air flow.
・ Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
・ Turn off all controls before unplugging.
・ Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they
may be present.
・ Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
・ Do not use without dust bag and/or filters in place.
・ Unplug before connecting dust bag.
01
1. Safety Instructions

Supplement for Robot Vacuum :
・ Place the cords from other appliances out of the area to be cleaned.
・ Do not operate the vacuum in a room where an infant or child is sleeping.
・ Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be
cleaned.
・ Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may
accidentally hit or bump into.
・ Do not allow children to sit on the vacuum.
・ Do not use the vacuum on a wet surface.
・ Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery
pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or
energizing appliance that have the switch on invites accidents.
・ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
・ Use appliances only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
・ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
・ Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
・ Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or
temperature above 130℃ may cause explosion. The temperature of 130°C can be replaced by the
temperature of 265°F.
・ Follow all charging instructions and do not charge the battery pack or appliance outside of the
temperature range specified in the instructions. Charging improperly or at temperatures outside of
the specified range may damage the battery and increase the risk of fire.
・ Have servicing performed by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the product is maintained. This appliance contains batteries that are
only replaceable by skilled persons.
・ Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as
indicated in the instructions for use and care.
・ Before using this appliance, pick up objects like clothing and loose paper. Lift up cords for blinds or
curtains. Move power cords and sharp, pointed, or fragile objects out of the way. If this device passes
over a power cord and drags it, an object could be pulled off a table or shelf.
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
・ If you do not use this product for a long time, please turn off the robot after it is fully charged and
put it in a cool and dry place. Charge it at least once every three months to avoid over discharge of
the battery.
・ Do not use this device in areas where there are exposed electrical outlets on the floor.
・ Do not use this device on unfinished, unsealed, waxed or rough surfaces. Otherwise, the floor and
this device may be damaged.
・ Do not use the mopping module on the carpet.
・ For use only with S103 docking station.(Auto-Empty Charging Base)
02

Battery and charging
・ The auto-empty base must be removed from the socket-outlet before cleaning or maintaining the
appliance.
WARNING: For the purposes of recharging the battery, only use the auto-empty base (model: SD01 &
SD02) provided with this appliance.
・ The auto-empty base only for charging Li-ion battery (Max. 2600mAh) of robot cleaner.
・ Do not charge non-rechargeable battery.
・ The appliance and battery use and storage, and charging system during charging in ambient
temperature range 4℃~40℃.
・ For indoor use only.
・ Battery type of remote controller: AAA .
・ Non-rechargeable batteries are not to be recharged.
・ Different types of batteries or new and used batteries are not to be mixed.
・ Batteries are to be inserted with the correct polarity.
・ Exhausted batteries are to be removed from the appliance and safely disposed.
・ If the appliance is to be stored unused for a long period, the batteries are removed.
・ The supply terminals are not to be short-circuited.
SAVE THESE INSTRUCTIONS
Polarization instructions :
・ To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
・ Reorient or relocate the receiving antenna.
・ Increase the separation between the equipment and receiver.
・ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
・ Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the device.
03

2.1 What's in the Box
Remote Control
04
2. Product Overview
Robot Vacuum
(hereinafter referred
to as the Robot)
Side Brush (x1)
Auto-Empty Charging Base
(hereinafter referred to as
the Charging Base)
(with dust bag pre-installed)
Power Cable
Additional Side
Brush (x1)
Additional Filter (x1) Cable Ties (x5)
Additional Dust
Bags (x2)
User Manual and
Other Documents
User Manual
Battery (x2)
Cleaning Brush
(In the dust box)
Mopping module
(Mop pad installed)

White : Normal power
Red : Low power or Error
Pulsing White : Charging
Robot status indicator light
2.2 Product Anatomy (Including Buttons and Indicators)
A) Robot Vacuum
Top View
05
Power button
- Turn On/Off : Press and hold for 3 seconds to
power on or off.
- Auto Cleaning : After power-on, press to start Auto
Cleaning.
Spot Cleaning button
- Spot Cleaning : Press to start Spot Cleaning.
Recharge button
- Recharge : Press to start recharging.
- Manual Emptying : Press to start manual dust
collection during charging.
- Reset Wi-Fi : Press and hold both buttons for 3
seconds to reset Wi-Fi.
Button
- Press any button to pause during
cleaning or recharging.
+
Cleaning brush
Dust Box
Dust box and water tank
combo module
Mopping
module
Panel
Front bumper
Air outlet
Water Tank

Main sensors
Bottom View
Caster wheel
Battery
compartment
Side brush
Roller brush
Roller brush
cover
Front bumper sensor
Infrared obstacle avoidance
sensor
Cliff sensor
Recharge sensor
Optical path sensor
Roller brush
cover buckle
Charging contact
pins
Wheels
06
Dust Box and Water Tank Combo Module
Dust box
release button
Dust box
cover
Water tank cap
Filter cover
Filter cover
buckle
Front filter
High-performance
filter
Dust box cover
buckle
Auto-empty
dirt port
Auto-empty
dirt port cover
Water outlet
Water inlet

Status indicator light (in power-on state)
Solid White : Connected to power, but the robot is
not attached to the charging base.
Light off : The robot is attached to the charging
base.
Pulsing White : Emptying dust.
Solid Red : Dust bag missing or top cover not
close tightly.
Slowly Flashing Red : Dust bag needs to be replaced.
Rapidly Flashing Red : Air duct blocked.
B) Auto-Empty Charging Base (referred to as the Charging Base)
Front View
Back View
Top cover
Charging contacts
Charging base location beacon
Charging base dirt port
Power port
07
Mopping Module
Adhesive surface of
the mop pad
Mop pad
Slot entry
Adhesive area of the
mop bracket
Mop bracket
Mop bracket slot
Mop bracket
button

C) Remote control
Battery :
2 AAA Remote control batteries
Auto Cleaning button
Controlbutton-left
Spot Cleaning button
Controlbutton-forward
Recharge button
Suction level button
Controlbutton-right
Start/Pause button
Controlbutton-backward
08
Bottom View
Air duct cover screws
Air duct cover
Top View
Charging base filter
Dust bag guide rails

3.1 Important Tips Before Use
Prepare your home environment
1) Remove protective items
3.2 Get Started
Before use, remove any protective strips or films on the robot.
Before use, clear up the mess especially wires on the floor that may
be wrapped around the robot. Remove items that are fragile,
valuable, potentially hazardous and easy to fall. Avoid any damage
to persons or property caused by being entangled, stuck, dragged
or knocked over by the robot.
1
Fold tasseled edges of rugs underneath to prevent tangling the
robot. Avoid cleaning rugs with very dark color or thickness
exceeding 12.7 mm.
2
The robot may climb on top of objects less than 20mm in height.
Remove these objects if possible.
3
09
3. Installation
When using the robot in specific areas with suspended environment
or dangerous areas, such as fireplace or exhaust port, it is
recommended to place physical barriers instead of magnetic
boundary strips to prevent damage to your body or property
caused by accidental fall or entry of the robot.
4
During cleaning, ensure that the robot is kept away from wet areas
and viscous substances.
5
The robot may get stuck or encounter some obstacles during the first few times of cleaning, please
follow the robot to observe and resolve any problems that may occur.
6

10
2
- Always connect the charging base to the power supply. Ensure that it is located in a place with
continuous Wi-Fi network and good network performance.
Note :
- Always keep the charging base plugged in, otherwise the robot will not return automatically.
- To return to the charging base smoothly after cleaning, it is recommended to start cleaning from
the charging base. Do not move the charging base during cleaning.
Good Wi-Fi coverage
Store the
power cable
in its storage
slot.
2) Install side brush
Place the charging base and power it on.
- Place the charging base in an easy-to-access
position for the robot.
Note :
- Ensure that no objects are placed within 1.5m
in front of the charging base and 0.5m from
both sides.
- Do not cover the signal transmitting area of the
charging base with any object.
- Avoid direct sunlight, which will affect the
recharge effect.
- Place the charging base on a level, non-slip, hard surface and against a wall.
Note :
- To avoid recharging failure caused by position change, do not put the charging base on a carpet or
blanket.
3) Place the charging base, connect the power supply and charge the robot
Connect the power cable and organize the power
cables with the cable ties.
1
Note :
- Power cable on your floor may entangle the
robot, resulting in power failure or jamming
of the robot.
Click
>0.5m
>0.5m
>1.5m

RobotCharging base
Align with the charging
contact pins.
Connect the robot to the charging base and
turn it on.
- After connecting to the power supply, attach
the robot to the charging base by aligning
the charging contact pins. The robot will turn
on automatically.
3
Note :
- When the battery level is insufficient to turn on the robot, place the robot on the charging base for
a period of time, and the device will turn on automatically.
- If the robot is not on the charging base, press and hold the power button for 3 seconds to turn it
on.
Fully charged.
- Fully charge the robot before first use.
4
Note :
- It is recommended to charge the robot for at least 4-6 hours before first use. The robot will not
start or return for recharge without enough power.
2Reset Wi-Fi.
- Press and hold both buttons ( Spot Cleaning button and Recharge button) for 3 seconds
until you hear the voice prompt. The three indicators on the robot start to flash slowly, indicating
that the robot is ready for pairing.
Download the app.
- Search for the "Verefa Life" app in the app store.
Then download and install it.
1
4) Connect to mobile client
Note :
- Make sure your smartphone is running iOS 9.0 (or above) or Android 5.0 (or above).
- Make sure the 2.4GHz band wireless signal is enabled on your wireless router and the signal is
strong.
- To ensure better connection quality, please turn on the Bluetooth of your mobile phone.
11
Verefa Life

Start cleaning
5) Start cleaning
12
Add a device.
- Open the app and follow the prompts to register or log in your account.
- Go to the home page of the app. Tap "+" in the upper right corner of the page to enter the “Add
Device” page.
- Follow the on-screen instructions to connect with the robot.
3
Note :
- Only the 2.4GHz band is supported for the Wi-Fi connection.
- As the app will be updated from time to time, the actual operation may be different from the above
descriptions. Always follow the instructions in your app to complete the Wi-Fi connection.
- If the network configuration fails, reset Wi-Fi and repeat the above operations.

4. Operating Instructions
4.1 Main functions
◉Turn on/off
- Press and hold the power button for 3 seconds to turn on the robot. The power indicator lights up.
Press and hold the power button for 3 seconds again, and the robot will turn off.
◉Start cleaning (Auto cleaning)
- Press the power button, and the robot will clean your rooms
in sequence, following a Z-shaped cleaning method. Then it
will clean along the walls in an orderly and efficient way.
After cleaning, the robot will automatically return to the
charging base for charging.
13
Note :
- The robot cannot be turned off during charging.
Note :
- If the power is too low to start cleaning, charge the robot
first and then start cleaning.
- If the power is insufficient during cleaning, the robot will automatically return to the charging base
for charging. After fully charged, it will resume cleaning from where it left off.
- If the cleaning area is less than 4 m² , the robot will clean twice by default.
- Please tidy up all wires on your floor (including the power cable of the charging base) before
cleaning to avoid power failure and damage to the items or wires caused by dragging during
cleaning.
◉Pause/resume/sleep
- When the robot is working, press any button to pause it, and press the power button to continue
cleaning.
- If standby exceeds 10 minutes, the robot will automatically enter the sleep mode. In the sleep
mode, the power indicators are all off. Press any button to wake up the robot in sleep mode.
Note :
- If the robot is placed back to the charging base for charging, the current cleaning task will be ended.
- To continue cleaning task, place the robot in its original position to avoid path confusion.
- The robot will not enter the sleep mode during charging.

14
◉Recharge
- Automatic mode: When the cleaning is completed or the battery is low during auto cleaning, the
robot will automatically return to the charging base to charge.
- Manual mode : When the cleaning is paused, press the recharge button to start recharge, or
enable it in the app.
Note :
- If the robot fails to return to the charging base, manually place the robot back to the charging base
for charging.
- The indicator light will pulse white when the robot is being charged.
◉Spot cleaning
- In standby mode or when the cleaning is paused, press
the Spot cleaning button to start Spot Cleaning. The robot
will clean a specific area with a diameter of 1.2m in a spiral
pattern. After cleaning, the robot will automatically return
to the starting point and finish the work.
1.2m
1.2m
Note :
- Starting spot cleaning when there are other tasks will
directly end the previous cleaning task.
◉Auto-boost (only set via the app)
- During cleaning, the robot will automatically increase the suction power if it detects that stronger
power is needed to ensure the best clean, such as thick carpets and hard-to-clean messes.
- This function will reduce the cleaning time and increase the noise level. If the increased noise
disturbs you, you can disable this feature in the app.
◉Schedule cleaning (only set via the app)
- You can schedule cleaning in the app. The robot will automatically start cleaning at the specified
time and automatically return to the charging base after cleaning.
◉Suction level
- For best cleaning effect, select different suction levels according to your needs.
- The greater the suction, the shorter the cleaning time and higher the noise.
- It can be set with the remote control and in the app.
Note :
- When the scheduled time arrives during a cleaning session, the last cleaning task will be ended.

15
◉Auto-Empty dirt
- Auto emptying :
- After cleaning, the robot will return to the charging base, and the robot will automatically
empty the dust box according to the emptying frequency set in the app.
- The emptying frequency can be adjusted in the app.
- Manual emptying :
- When the robot is connected to the charging base, you can press the recharge button of the
robot or remote control to start manual emptying.
Note :
- If auto emptying is not needed, disable this feature in the app.
Note:
- Do not use detergent and disinfectant to avoid corroding the water tank and blocking the water
outlet.
- Do not fill with hot water, as it may cause deformation of the water tank.
4.2 Mopping function
Fill the water tank with water
- Take out the dust box and water tank combo module.
- Open the water tank cap, fill tank with water and close it tightly.
- Reinstall the combo Module
1
◉Mopping
- The user can realize the mopping function by installing the mopping module and adding water to
the water tank.
- When the mopping module is installed, the Robot Vacuum automatically activate the mopping
function. The user can adjust the water amount in the APP, as well as set Only Mopping Mode
during the cleaning process.

16
Install the mop pad
- Wet the mop pad and wring it out until it does not drip. Place the mop bracket on the reverse side,
insert the mop pad along the mop bracket slot, and stick it firmly.
2
Click
Install the mopping module
- Push the mopping module with the mop pad installed in parallel along the back of the Robot
Vacuum, and install it in place when a "click" sound is heard.
3
Start cleaning
- Start the cleaning task, and the mopping function will be performed at this time.
4
Remove the mopping module
- When the Robot Vacuum finishes working and returns to the charging base, press the bottons
on both sides and take out the mopping module backwards.
5

17
4.3 Network functions
◉Reset Wi-Fi
- If your mobile phone cannot connect to the robot (such as
configuration or password change of your router), try to
reset the Wi-Fi and reconnect to the network.
- Press and hold both buttons ( Spot Cleaning button
and Recharge button) for 3 seconds until you hear the
voice prompt. The three indicators flash slowly, indicating
that the robot is ready for pairing.
- For detailed Wi-Fi setup instructions, refer to "Installation >
Connect to mobile client" in this manual.
- In order to ensure the best mopping effect, users can choose different water output levels for
mopping according to their needs.
- Higher water amount means less mop time at one time.
- Please pay attention to whether you need to replenish water to achieve the best mopping effect.
◉ Water amount adjustment
- When finishing mopping the floor, charging or not using, please remove the mopping module and
clean the mop pad in time, and pour out the water in the water tank to avoid odor or mildew.
Note:
- Please use the mopping function when someone is looking after.
- Don't allow wet mopping modules staying in a certain area for a long time to avoid excessive
moisture damage to the ground.
- When the mopping module is installed, the obstacle crossing height of the Robot Vacuum will be
reduced. Please be aware of the possibility of stucking
- The mopping function is only applicable to the clean floor without stubborn stains or liquid. If there
are coffee stains, ink stains and other colored stains on the floor, do not use the mopping function
to avoid soiling the floor.
- Mopping works best on smooth, hard surfaces, but may not work well on uneven tiles, heavily
waxed floors, or rough surfaces. Because it may get stuck, slip, and not be able to mop the floor
smoothly.
- Do not use the mopping function on the carpet.
- For better mopping effect, it is recommended to vaccum the floor 3 times with the Robot Vacuum
before using the mopping function.