veri-Q BALANCE PRO User manual

MGD-1002A
USER MANUAL
Blood Glucose Monitoring System
Blood Glucose Monitoring System
MiCoBioMed Co., Ltd.
116, Gongdan 1-ro, Anseong-si, Gyeonggi-do, Korea
www.micobiomed.com
Made in Korea
VERI-Q is trademarks of MiCoBioMed.
All other product names and trademarks are the property of their respective owners.
MT Promedt Consulting GmbH
Altenhofstrasse 80, 66386 St. Ingbert, Germany
0120
2016 MiCoBioMed. All rights reserved.
Lancet : Sae Han Med Corp.
Na-dong, Ga-dong, 331 Seongseok-ro, Ilsandong-gu, Goyang-si, Gyunggi-do, Korea
Lancing device : SteriLance Medical (Suzhou) Inc.
No. 68 Litanghe Road, Xiangcheng Suzhou 215133 China

3
micobiomed VERI-Q BALANCE PRO
micobiomed
Thank you for selecting the VERI-Q BALANCE PRO blood glucose
monitoring system. Follow the steps for using the system in this
manual. Before using your monitoring system for the first time, read
this manual carefully.
Intended Use
This VERI-Q BALANCE PRO blood glucose monitoring system is
intended for the quantitative measurement of the concentration of
glucose in whole blood from fingertip, ventral palm and forearm by
diabetic patients or healthcare professionals as an aid in the
management of diabetes. It is intended for use outside of the body (in
vitro diagnostic use), and not for diagnosis of or screening for
diabetes, nor for use on neonates or arterial blood. The alternative site
testing (ventral palm and forearm) in this system can only be used
during steady-state blood glucose conditions.
Application
VERI-Q MGSC series test strips are for in vitro diagnostics use only.
The VERI-Q BALANCE PRO is not a substitute for your healthcare
professional. Use the VERI-Q BALANCE PRO in conjunction with your
healthcare program.
Welcome

4 micobiomed
Blood Glucose Monitoring System
Contents
Brief 1
Cautions 6
Safety Information 8
System Components 9
System Introduction
- VERI-Q BALANCE PRO 10
- VERI-Q MGSC series test strip 11
- Display 12
The Test
- Disinfectant before test 13
- Insert glucose test strips 14
- The method of blood collection 15
- Add blood sample 16
- Proper blood sample 17
- Processing the test result 18
The Use of Function Buttons
- Checking test results 20
- Setting mode 22
- Setting complete 27
- Special results 27
Replacing Battery 29
Cleaning VERI-Q
BALANCE PRO 31
Troubleshooting
- Error messages 32
- Hi, Lo messages 33
Warranty 36
Technical Specification 37
Diagnostic System
- Control solution test 38
- Check strip test 39
Important Information
- Alternative site testing 40
- Alternative test site sampling 42
Symbols 43

5
micobiomed VERI-Q BALANCE PRO
micobiomed
Glucose in the blood sample reacts with glucose oxidase (GOD) on
the test strip and a harmless DC electrical current is produced. This
current is measured by the VERI-Q BALANCE PRO and displayed as
your blood glucose result. The strength of these currents changes
with the amount of glucose in the blood sample.The VERI-Q BALANCE
PRO automatically interprets this reaction. Test results with the VERI-Q
BALANCE PRO are plasma- equivalent.
The reference instrument used is the YSI 2300 glucose analyzer and is
calibrated by YSI 2747 calibrator solution.
Special Features
Easy to check last 1~90 days average result.
VERI-Q BALANCE PRO blood glucose monitoring system is designed
for home usage.
Accurate result in 5 seconds with using only 0.5 ㎕blood sample.
Large display screen.
Store up to 500 test results.
Blood glucose measurement units are pre-set in mg/dL or mmol/L.
Use of the wrong unit of measure may cause you to misinterpret
your blood glucose level, and may lead to incorrect treatment.
Test Principle

6 micobiomed
Blood Glucose Monitoring System
Before using your monitoring system, place it in the environment
with the system's normal operating temperature ranging from 10 to
40°C (50~104°F) for about 20 minutes.
Don't allow dust and foreign bodies into test strip slot in order to
avoid affecting the system's accuracy.
Don't decompose, demolish, repair or transform the system at any
time.
Don't put the system near any electromagnetic field. (e.g. TV,
microwave oven and mobile phone)
Don't allow the monitoring system to collide with others during
usage.
Keep away from direct sunlight and humid environment for an
extended period of time.
Use a soft cotton cloth to wipe the system.
Don't use a corrosive product (e.g. Benzene, Acetone) to wipe the
monitoring system.
Cautions
Usage and Storage

7
micobiomed VERI-Q BALANCE PRO
micobiomed
Store bottle in a cool and dry place between 2~30°C (35.6~86°F).
Take test strips out with clean and dry hands for accurate results.
Use test strips immediately after retrieving from the bottle and to
keep the test strip bottle tightly closed at all time.
Don't reuse the test strips. The VERI-Q MGSC series test strips is for
one time use only.
This product is not recommended for pregnant women, newborns
or people under severe dehydration.
Be sure to check the glucose measurement unit on the meter before
the test.
Keep away from direct sunlight and heat.
Don't refrigerate or freeze test strips.
Don't use test strips past expiration date.
VERI-Q BALANCE PRO is for use only with VERI-Q MGSC series test
strips.
MGSC Series Test Strips

8 micobiomed
Blood Glucose Monitoring System
Inaccurate results may occur for individuals or patients in shock.
Inaccurate results may occur for individuals experiencing a
hyperglycemic-hyperosmolar state, with or without ketosis. Critically
ill patients should not be tested with a blood glucose meter.
Before using the system, read this manual carefully.
The meter and test strips should be handled at the same temperature.
For accurate results, keep the VERI-Q BALANCE PRO blood glucose
monitoring system at test place under the operating temperature
(50~104°F/10~40°C) for more than 20 minutes before testing.
The VERI-Q BALANCE PRO blood glucose monitoring system shows
accurate results between 50~104°F (10~40°C).
Do not store the meter, test strips, lancing device and lancet in a
place where the children can reach easily.
Disinfect the instruments and parts for blood collection.
Do not reuse the test strips.
The used test strip and lancet should be handled carefully.
The VERI-Q BALANCE PRO blood glucose monitoring system is for
point-of-care testing (in vitro diagnostic use).
Safety Information

9
micobiomed VERI-Q BALANCE PRO
micobiomed
System Components
VERI-Q BALANCE PRO Blood Glucose Monitoring System
Basic components provided:
VERI-Q BALANCE PRO
VERI-Q MGSC series test strips (10T), lancets (10ea), lancing device,
pouch and user manual
✽Some kits do not include test strips and check strip. Test strips and
check strip are sold separately.
Components sold separately:
MGSC series test strips (25T, 50T), VERI-Q control solution, check strip.
MGD-1002A
USER MANUAL
Blood Glucose Monitoring System
Blood Glucose Test strip
www.micobiomed.com
Tests CODE
Forself-testing

10 micobiomed
Blood Glucose Monitoring System
MGD-100 2A
System Introduction
VERI-Q BALANCE PRO
Front
Back
Display
'M' Button
Test Strip Slot
'▹'Button

11
micobiomed VERI-Q BALANCE PRO
micobiomed
Blood Glucose Test strip
www.micobiomed.com
Tests CODE
For sel f-testing
VERI-Q MGSC Series Test Strip
Use VERI-Q MGSC series test strip with the VERI-Q BALANCE PRO.
Check the validity of test strips before using.
Write the opening date of the new test strips vial in order to avoid
using the expired products.
Test Strip Vial MGSC Series Test Strip

12 micobiomed
Blood Glucose Monitoring System
Display
Stored Test Result
Test Results
Unit of Measurement
Temperature Error
Low Battery Warning
After Meal Mark
After Drug
PC Connection
Buzzer on
Average Result
Month/Date
Time
Check Strip
Special Result
Ready to Test

13
micobiomed VERI-Q BALANCE PRO
micobiomed
The Test
Disinfection Before Test
Before test, clean hands with soap and water and then dry well.
You can also use an alcoholic cotton cloth to clean the finger.
Wait until the alcohol disappears completely.

14 micobiomed
Blood Glucose Monitoring System
Insert a Test Strip
Insert a test strip into the strip slot. You will
hear the sound of beeper.
Code Check
Compare the code number on the meter
display with the code number on the test
strip bottle. If the two code numbers match,
you may begin testing. If they do not match,
contact purchasing office.
Strip and Blood Symbol
The display screen will show the strip and
blood symbol ( ).
When the Strip and blood symbol( )
appears, the meter is ready for testing.
Start test according to the common method
(read the details in the page 15).
Insert Glucose Test Strips
Blood Glucose Test strip
www.mi cobiome d.com
Tests
CODE
For s elf- test ing
Beep!

15
micobiomed VERI-Q BALANCE PRO
micobiomed
The Method of Blood Collection
Never use a lancet that has been used by someone else.
Do not leave the lancet in the device after use and discard properly.
If the lancet cap has loosened or fallen, don't use it.
Unscrew the tip of the lancing device by turning
it counter-clockwise.
While holding the lancet carrier, insert a new
sterile lancet into the bottom of lancet carrier.
Twist off the cap of the lancet.
Put the tip of the lancing device back on and
turn it clockwise.
Get blood sample
Before testing, wash your hands thoroughly with
warm, soapy water. Rinse and dry completely.
Hold the lancing device firmly against the side of
your finger. Press the release button.

16 micobiomed
Blood Glucose Monitoring System
Add Blood Sample
Touch the blood
drop to the
sample channel at
the end of the strip.
When you hear
the beep, you can
start the test. After
5 seconds, the
result will appear.
Touch the blood
drop to the
sample channel at
the end of the strip.
Don't drop the
blood to the strip.

17
micobiomed VERI-Q BALANCE PRO
micobiomed
The amount of
blood sample is
sufficient.
The amount of
blood sample is
insufficient.
Proper Blood Sample
The sample channel at the end of the strip should be covered with
blood. When you hear the sound of beeper, The blood sample is
adequate.
Please don't drop the blood directly on the end of the strip.
When the blood sample is not sufficient, the display screen will show
the message of 'Er3' (refer to error message in this manual.)

18 micobiomed
Blood Glucose Monitoring System
Processing the Test Result
The test result will appear after the meter
counts down 5 seconds.
During countdown, don't shake it.
After showing the test result, take the strip
out.
5 seconds after drawing blood sample, you
can hear the sound of beeper, and the
screen will show test result, date and time.
After taking the strip out, the meter will be
turned off automatically.
If the test result is abnormal, test again with a new test strip.
Also if the test result has a problem, refer to the Troubleshooting in this
manual.
or

19
micobiomed VERI-Q BALANCE PRO
micobiomed
If you don't want to store test results or
control solution test results, press "M" button,
You can show the symbol " " in the screen.
After turning off, The meter will not store the
test results.
If you want to mark test results after meal or
medicine, press "▶" button, You can show
changed the symbol " " or " " in the
screen.
After turning off, The meter will store the
test results.

20 micobiomed
Blood Glucose Monitoring System
The Use of Function Buttons
Checking Test Results
If you don't make any changes, the meter will be turned off
automatically after 3 minutes.
Begin with the meter off. Press 'M' button,
and you will hear the beep and the meter will
be turned on.
After 2 seconds, the last average result will be
displayed.
Beep!
or