VeriFone DS9208 User manual

Date: November 4, 2021
Installation Guide
Verifone DS9208 Scanner

Verifone DS9208 Scanner Installation Guide
Verifone, Inc.
2560 N. 1st Street, Suite 220
San Jose, CA 95131
Telephone: [phone]
http://www.verifone.com
© 2021 Verifone, Inc. All rights reserved.
No part of this publication covered by the copyrights hereon may be reproduced or copied
in any form or by any means - graphic, electronic, or mechanical, including photocopying,
taping, or information storage and retrieval systems - without written permission of the
publisher.
The content of this document is subject to change without notice. The information
contained herein does not represent a commitment on the part of Verifone. All features
and specifications are subject to change without notice.
Verifone, Ruby SuperSystem, and Secure PumpPAY are registered trademarks of Verifone,
Inc. Ruby Card, iOrder, and Commander Site Controller are trademarks of Verifone. All
other brand names and trademarks mentioned in this document are the properties of their
respective holders.

Revision History
Date Comment
June 9, 2017 Initial Release
June 12, 2017 Updated Installation section.
August 8, 2017 Added scanner codes for DS0298.
November 4, 2021 Added volume adjustment, troubleshooting
chart, and a note with manufacturer website.

i
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Verifone DS9208 Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Topaz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Ruby2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ii

1
Introduction
The DS9208 scanner is versatile in its ability to scan any 1D and 2D bar codes from
printed labels to loyalty cards. The true point-and-shoot scanning allows users to
quickly assist customers. There is no need to align bar codes with this hands-free and
hand-held flexible scanner.
Verifone DS9208 Scanner
Before starting
Before starting, ensure that all necessary parts for the DS9208 scanner are accounted
for after taken out of the box.
Part Number Description
BCR414-208-01-A Bar code scanner imager, with cable.
Symbol DS9208-SR422R28Z

2
Installation
To p a z
To install the DS9208 scanner with the supplied cable, connect the cable to COM port 8
on the back of the Topaz.
Ruby2
To install the DS9208 scanner with the supplied cable, connect the cable to COM port 8
on the back of the Ruby2.
Two scanners can be used on any given register. COM port 8 is the
default port, however COM port 1 can be used for the secondary
scanner. The scanners may be moved from these default ports if
necessary.

3
Configuration
After the DS9208 scanner has been successfully installed, it will need to be configured
on either the Topaz or Ruby2 through the CSR Func > Maintenance Menu.
1. Log into the Topaz or Ruby2.
2. Select the CSR Func key.
3. Select the Maintenance option from the Main Menu.

4
4. Select the Device Configuration function.