Verizon SC-LTE-V User manual

LTE Home Antenna User Manual
1
User Guide
LTE Home Antenna
June 17, 2021
v1.8

LTE Home Antenna User Manual
2
Document History
Version
Date
Change
Verizon POC
1.8
06.17.21
Antenna removal section
Document Approvals
Name
Title
Company
Date of Approval

LTE Home Antenna User Manual
3
Table of Contents
Overview ...................................................................................................................................................................... 4
Before Installation ..................................................................................................................................................... 4
Contents ........................................................................................................................................................ 4
Installation ................................................................................................................................................................... 6
Step 1 Connect the Power Injector Antenna Cable onto the Router Antenna Port ............................ 6
Step 2 Connect the Cable from the LTE Home Antenna to the Power Injector .................................. 6
Step 3 Plug the Power Adapter into a Nearby Outlet with the Other End into the Power Injector .. 6
Step 4 Identify the Location of Best Signal for Placement of the LTE Home Antenna ...................... 7
Step 5 Mount the Antenna at the Identified Location .............................................................................. 8
Step 6 Route and Secure the Cables ........................................................................................................ 8
Instructions for Antenna Removal ...................................................................................................................... 9
Product specifications ........................................................................................................................................... 10
Regulatory Information .......................................................................................................................................... 10

LTE Home Antenna User Manual
4
Overview
The LTE Home Antenna is a signal booster that, when placed on a window and connected to your router,
delivers improved LTE signal to the LTE Home Router to improve data throughput speeds.
Before Installation
Remove Contents from packaging
Contents
•LTE Home Antenna with mounting adhesive
•Power Adapter
•Power Injector
•Velcro straps and cable clips
Figure 1: Contents

LTE Home Antenna User Manual
5
Figure 2: Overview of Product Assembly
LTE Home Router
Power Injector
Power Adapter
LTE Home
Antenna

LTE Home Antenna User Manual
6
Installation
Step 1 Connect the Power Injector Antenna Cable onto the Router Antenna Port
Figure 3: Connecting the power injector cable to your router antenna port
Step 2 Connect the Cable from the LTE Home Antenna to the Power Injector
Figure 4: Connecting the LTE Home Antenna to the power injector
Step 3 Plug the Power Adapter into a Nearby Outlet with the Other End into the Power Injector
Plug the power adapter into the AC outlet near the router, then plug the other end into the power injector.
Once connected, a GREEN LED on the power injector will appear to indicate that the LTE Home Antenna
is receiving power. If the power injector is showing a RED LED, please double check that all cables are
connected securely.
Power
Injector
Router
Antenna
Port
Power
Injector
LTE Home
Antenna

LTE Home Antenna User Manual
7
If your LTE Home Router was not already turned on, please turn it on now.
Please note – If you power on the LTE Home Router while the LTE Home Antenna is connected to the
antenna port on the router but not connected to power, the router may not complete its boot up process
properly and will not work as expected. If this occurs, please turn off the router and ensure the LTE
Home Antenna is connected to power before turning the LTE Home Router back on.
Figure 5: Connecting the power supply to the power injector
Step 4 Identify the Location of Best Signal for Placement of the LTE Home Antenna
Identifying and mounting the LTE Home Antenna in the location of your home with the best available LTE
signal will provide the best performance of your LTE Home Router. Typically, the best signal and
recommended mounting location for the antenna will be on a window in your home.
Figure 6: Locating best placement for your LTE Home Antenna
Once all components are connected, you can use the admin portal on your LTE Home Router to measure
signal strength at various locations. Details to connect to the admin portal for your LTE Home Router can
be found on the label on the bottom of the router.
Cable to
LTE Home
Antenna
Power
Injector
Power
Supply

LTE Home Antenna User Manual
8
Once logged in, select the following from the menu on the left to view the signal strength:
Network > Network Status > LTE
Step 5 Mount the Antenna at the Identified Location
Note: Before final placement, please consider that the adhesive will create a secure bond to the surface.
To remove the antenna from a window surface, see, “Antenna Removal” on page 9.
Once the best mounting location has been identified, prepare the area by cleaning it first (rubbing alcohol,
window cleaner and similar solutions work well). Once the area has thoroughly dried, mount the antenna
by removing the paper backing from the adhesive padding and firmly pressing it against the cleaned area.
Please ensure the antenna is mounted vertically with the cable pointing down for the best performance.
Figure 7: Attaching the LTE Home Antenna
Step 6 Route and Secure the Cables
Figure 8: Routing the cables
Using the included cable clips and Velcro straps, route the cables as desired for the cleanest possible
installation. If Velcro straps are used, coil the excess cable before wrapping to ensure a clean look and
installation.

LTE Home Antenna User Manual
9
Instructions for Antenna Removal
Before final placement, please consider that the adhesive will create a secure bond to the surface. Should you need
to remove the antenna, see the steps below:
1. Remove the antenna from the window. Disconnect or unplug the antenna from the LTE Home Router before
proceeding. Use a plastic putty knife or similar tool to gently remove it from the window. This may take some
time, but never push/pull too hard or use any metal objects like a screwdriver, because it could result in
breaking the glass and possible injury.
2. Remove the adhesive from the window. To loosen the adhesive prior to removal, use a heat source like a hair
dryer. Apply rubbing alcohol, WD-40 or a similar solvent using a cloth or a pre-saturated wipe to the residue and
surrounding area. Use a stainless-steel blade approved for use on glass to firmly scrape any remaining adhesive
pad from the window surface. Apply additional solvent as needed. Once complete, use window cleaner to clean
the area and check for remaining residue.
3. Remove remaining adhesive from the antenna. Use fingers to remove remaining residue from the antenna.

LTE Home Antenna User Manual
10
Product specifications
Name
LTE Home Antenna
Model:
SC-LTE-V
Certifications:
FCC (North America)
Wireless Network:
LTE
Technology Compatibility:
4G-LTE
Cable (Antenna):
RG174; 20 ft.
Cable (Power Injector):
RG174; 7 ft.
Regulatory Information
LTE Home Antenna
FCC ID: RSNLTE-V
THIS IS A CONSUMER DEVICE
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent.
Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are
unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8
Inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
This device may be operated ONLY in a fixed location for in-building use.
CLASS B EQUIPMENT: This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
residential environment.
This equipment generates radio frequency energy and is designed for use in accordance with the manufacturer’s user manual. However, there is no
guarantee that interference will not occur in any particular installation. If this equipment causes harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following
measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation.

LTE Home Antenna User Manual
11
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 32 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.