Verizon T2000 User manual

Meet your Wireless
Home Phone.
*Note:
Never place a USB-based device into the power connector port of the
Wireless Home Phone. Doing so may damage the Wireless Home Phone and
negate its warranty.
© 2016 Verizon Wireless. All Rights Reserved
PN 90029395 DRAFTE.R1
About your Wireless Home Phone
Top view
Bottom view
No. Item No. Item
1
Power on/off button
5Antenna connector
2
Phone/Fax port 1 (RJ11)
6OLED display
Phone/Fax port 2 (RJ11)
7LED status indicator
3
Home security port
8Menu button
4
Power connector port
No. Item
1Wall-mounting brackets
2Battery removal tab
3Battery cover
4Reset button

Setting up your Wireless Home Phone
Your Wireless Home Phone comes with the SIM card installed.
Step 1: Install the battery
Optional: Install the antenna
To increase signal strength, you can install an optional antenna.
1. Align the antenna with the antenna port and screw securely into place
2. Restart the Wireless Home Phone after the antenna is inserted or
removed.
Note: Antenna sold separately.
Step 2: Install the power adapter
1. Insert the power adapter into the power connector port.
2. Plug the power adapter into a wall outlet.
Step 3: Connect your telephone to the Wireless Home Phone
The Wireless Home Phone provides ports for up to two telephones or Fax
machines. The ports use the same telephone number.
1. Unplug all telephones that you want to use with the Wireless Home
Phone from wall telephone jacks.
Warning: Only phones plugged into the Wireless Home Phone will use this wireless
service. If your existing phone has rotary or pulse dialing,it will not work with this product.
2. Plug the end of your telephone cord into one of the telephone ports on
the back of your Wireless Home Phone (the other end of the cord must
remain plugged into the back of your home telephone base unit).
Step 4: Turn on your Wireless Home Phone
Press the Power button to turn on the Wireless Home Phone.
The power indicator will be blue when device is turned on.
Important
Please make sure your Wireless Home Phone is located in an area of your
home that receives a strong wireless signal.
1. Open the
battery cover.
2. Insert the battery connection
cable into the battery port. Then
insert the battery as shown.
3. Close the
battery cover.
Step 5: Initial activation
Dial *228 on the telephone connected
to your Wireless Home Phone and
follow the instructions.
Please read the following if you are transferring your telephone number
from a different provider.
Note: Customers transferring in their home number will not be able to make or receive calls on
the Wireless Home Phone until the transfer process is completed. The transfer process can
take 2 – 10 business days.
Check the status of your transfer by visiting verizonwireless.com/LNP or by calling
877. 567.4899.
Note: The telephone and telephone
cord are not included.
Step 6: Make calls
1. Before making a call, make sure at least one of the signal strength
indicator bars ( ) is lit up. If no bars are lit, move the Wireless Home
Phone to a location that receives a signal.
2. Place a call to start using the service.
Important
Customers may need to use the three-digit area code when dialing local
and long distance numbers.
Find more information
• Please refer to the User Guide at verizonwireless.com/support for
more details.
• Customer Service is available at any Verizon Wireless store or by calling
800.922.0204.
1
2
1
2