Introduction
What’s in the box
What you’ll need
●A working Internet connection.
●A smartphone or laptop
●A #2 Phillips screwdriver or power drill
with a #2 Phillips driver bit
●5/16 inch (8 mm) drill bit for wall anchors
●1/8 inch (3mm) drill bit for pilot holes
●PoE BT power injector (sold separately)
●Flat screwdriver
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
3
CH52-E Multisensor Camera IR Cover Mounting template
2 Desiccants T10 Security screwdriver
3 M5 Mounting screws
Length: 33.1mm, Width: 11.8mm
3 Wall anchors
Connect
For easy registration and setup, scan the QR
code on the product.
If you prefer to manually register your product,
please proceed to: verkada.com/start
Offset Wrench
