Vermason 231700 Installation and operating instructions

VACUUM CLEANER AND BLOWER
Installation, Operation and Maintenance
UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, SG6 2TD UK
Phone: [phone], Fax: [phone] • e-mail: [e-mail], Internet: Vermason.co.uk
TB-7510 December 2008 Page 1 of 2 © 2008 Vermason
Figure 1. 231700 Vacuum
Cleaner.
Description
Compact lightweight blower /
vacuum cleaner designed for
precise removal and collection of
dry dust particles and debris from
electrostatic static sensitive
devices (ESDS). The conductive
nozzles drain-off any static build-
up to earth.
In order to comply with EN61340-
5 recommendations for working in
an ESD protected area (EPA), the
appliance housing, nozzles, hose,
shoulder strap, cable and
accessories are fully conductive.
The vacuum cleaner can retain
dust and fine dry particles as
small as 0,3 micron, the vacuum
cleaner is fitted with a double-
layer paper filter bag and an
electro-static charged micro-
motor filter.
The appliance can also be
converted in seconds into a
powerful blower for dust removal
in area's otherwise not accessible
- the blower's air-current is cfc-
free and contains no oil or water
residue.
The appliance is constructed to
safety class II: Double insulated
design in compliance with CE
standards.
- Durable and compact design
- Motor has thermal protection
with RFI/EMC filter
- Hose assembly extends to
130cm
- Includes hard crevice and soft
rubber nozzle
- 1.2 l filter bag
- Advanced 5 stage filtration
system
- 3m long power cord
- Conductive carry strap
Inspection
Remove the vacuum cleaner from
the carton and inspect for
shipping damages.
Each unit should include the
following:
1 Vacuum Cleaner (231700 or
231710)
1 1.3m Hose
2 Nozzles
1 Carrying Strap
Optional Accessories:
- 231725: Replacement Bags,
Pack of 10
- 231705: Carry Bag
Operating instructions
1. Push hose end into
suction opening
2. Press the suction nozzle onto
the free suction hose-end
3. Place rocker switch in off
position
4. Set electronic control to
medium power ( 231700,
231710)
5. Insert the plug into the
electrical supply and start
appliance, pressing on-off
switch to "on" position.
Figure 2. 231700 Vacuum
Cleaner.
If there is substantial loss of
vacuum or blow-pressure, take
the following steps:
6. Remove appliance from
the EPA
7. Check whether nozzle or
suction-hose have become
blocked
8. Switch off appliance and
disconnect plug from
electrical supply
9. Lift metal bottom lock and
remove housing's front cover
10. Remove and replace the
spent paper filter bag
11. Replace electrostatic micro-
motor filter.
TECHNICAL BULLETIN TB-7510
Made in Britain

Note: This appliance is equipped
with a thermal protection device.
To protect the motor from
overheating, it will switch off
automatically if there is an
inadequate air supply. To enable a
restart, check filters, bags, nozzle
and hose for blockages. On the
231700, 231710 version, reduce
the power setting. When the
motor has cooled down, the
appliance should restart after 15-
20 minutes.
Safety points
When cleaning this equipment,
ensure it is switched-off and no
longer connected to the power
supply.
Ensure any object to be cleaned,
is itself connected to earth in
accordance with EN 61340-5
recommendations.
Always use the on-off rocker
switch to turn the appliance on or
off.
This appliance is made for indoor
use only, it must be stored in a
dry place and should not be
operated under wet conditions
such as wet floors or wet
surfaces. Never touch the
appliance or the plug with wet
hands.
This appliance is not designed,
nor suitable, to collect liquids, nor
health endangering dust such as
asbestos or tropical wood
sawdust.
Unplug the appliance when it is
not in use
Do not pull the cord to unplug it,
do not use the cord to carry or
pull the appliance, keep the cord
away from hot surfaces.
Never use the appliance if the
cord or plug are damaged
Never use the appliance if the
suction is blocked or with
completely restricted vacuum flow
or air exit.
Limited Warranty
Vermason expressly warrants that for a period
of one (1) year from the date of purchase,
Vermason Vacuum Cleaners will be free of
defects in material (parts) and workmanship
(labour). Within the warranty period, a unit will
be tested, repaired or replaced at Vermason’s
option, free of charge. Call Customer Service
at 0044 (0) 1462 672005 for a Return Material
Authorisation (RMA) and for proper shipping
instructions and address. Any unit under
warranty should be shipped prepaid to the
Vermason factory. You should include a copy
of your original packing slip, invoice, or other
proof of purchase date. Warranty repairs will
take approximately two weeks.
If your unit is out of warranty, Vermason will
quote repair charges necessary to bring your
unit to factory standards. Call Customer
Service at 0044 (0) 1462 672005 for a Return
Material Authorisation (RMA) and proper
shipping instructions and address.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS
MADE IN LIEU OF ALL OTHER PRODUCT
WARRANTIES, EXPRESSED AND IMPLIED,
INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE
WHICH ARE SPECIFICALLY DISCLAIMED.
The express warranty will not apply to defects
or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly
maintain, clean or repair products.
Limit of liability
In no event will Vermason or any seller be
responsible or liable for any injury, loss or
damage, direct or consequential, arising out of
the use of or the inability to use the product.
Before using, users shall determine the
suitability of the product for their intended use,
and users assume all risk and liability
whatsoever in connection therewith.
Do not operate the vacuum
cleaner near flammable or
combustible liquids or fumes, do
not collect anything that is hot,
smoking or burning with the
cleaner. Do not pick-up burning
cigarettes, hot ashes or matches.
Use safety glasses when the
application is in blow mode, never
blow in corners or in the direction
of sharp objects such as staples,
paperclips, drawing-pins, needles,
pins and glass fragments.
Never use the appliance without
the filter bag and motor filter in
place.
Never re-use spent filter bags.
UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, SG6 2TD UK
Phone: [phone], Fax: [phone] • e-mail: [e-mail], Internet: Vermason.co.uk
TB-7510 Page 2 of 2 © 2008 Vermason