VERTIV™ CYBEX™ SC 920XD
Quick Installation Guide
590-1551-501B 1
Before installing the
Vertiv™ Cybex™
SC 920XD 2-port dual head KVM
switch
, ensure the following:
• The
front panel is visible to the
user.
• The tamper evident labels are
all intact.
WARNING: This product is
equipped with active intrusion
protection. Tampering can
permanently disable the switch and
void the warranty. If the enclosure
appears tampered with or if all port
LEDs flash continuously, contact
Technical Support. This product
has tamper evident seals. Broken
or removed seals will void the
warranty.
1. Connecting local
peripherals
Turn o all computers and
displays to be used with the SC
920XD switch. Plug the
monitor cable, USB keyboard
and mouse cables and the
speaker or headset cable into
the appropriate CONSOLE
ports on the back of the
switch.
2. Connecting each
computer
Plug the monitor cable and the
keyboard and mouse cable
from the corresponding
computer into the ports on the
switch’s USB Type-B port via a
USB cable. If applicable,
connect an audio cable from
the computer’s audio output to
the switch’s audio input. Repeat
for all computers.
NOTE: The cables must be
connected directly to a free
USB port on your computer
with no USB hubs or other
devices in between.
3. Turning on the
computers, displays and
switch
Plug one end of the power
supply cord into the switch and
the other end into an AC wall
outlet. Turn power on to the
connected computers, displays
and the switch. Ensure the
peripherals for each computer
are connected and working
properly. Repeat for all
computers.
SC 920XD Switch Shown
31
1 3
2
