Vertiv VE Series User manual

VE 系列机柜
系列机柜系列机柜
系列机柜
用户手册
用户手册用户手册
用户手册
VE Series Rack
User Manual
资料版本 V1.0
归档时间 2019-03-15
BOM 编码 31013940
Version V1.0
Revision date March 15, 2019
BOM 31013940
维谛技术有限公司为客户提供全方位的技术支
持，用户 与就近的维谛技术有限公司办事处
或客户服务中心联系，也 直接与公司总部联
系。
维谛技术有限公司
版权所有，保留一切权利。内容如有改动，恕
不另行通知。
维谛技术有限公司
地址：深圳市南山区学苑大道 1001 号南山智
园 B2 栋
邮编： 518055
公司网址： www.Vertiv.com
客户服务热线： 4008876510
E-mail ： Vertiv.serv[email protected]m
Vertiv provides customers with technical support.
Users may contact the nearest Vertiv local sales
office or service center.
Copyright © 2019 by Vertiv Co., Ltd.
All rights reserved. The contents in this document
are subject to change without notice.
Vertiv Co., Ltd.
Address: Block B2, Nanshan I Park ,No.1001
Xueyuan Road ,Nanshan District, Shenzhen
518055 P.R.China
Homepage: www.Vertiv.com
E-mail: [e-mail]

Copyright
The content in this document is subject to change without notice. All rights, including rights of translation,
reproduced by printing, copying or similar methods, and even of parts, are reserved. Violators will be liable for
damages. All rights, including rights deriving from patent license or registration of a utility model or design, are
reserved. No part of this document may be reproduced or transmitted in any form or by any means without the prior
written consent of Vertiv Co., Ltd.
Notice
The purchased products, services, and features are stipulated by the contract made between Vertiv Co., Ltd. and the
customer. All or part of the products, services, and features described in this document may not be within the
purchasing scope or the usage scope. nless otherwise specified in the contract, all statements, information, and
recommendations in this document are provided “AS IS” without warranties, guarantees or representations of any
kind, either express or implied. The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure the accuracy of the contents, but all the statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Vertiv Co. Ltd.
China
Website: www.vertiv.com
Email: [email protected]
Customer Service Hotline: [phone]
Asia-Pacific
Website: www.vertiv.com
Email: [email protected]
For Technical Support, users may contact the nearest Vertiv Co., Ltd. local sales office or service center.

Precautions
Thank you for purchasing products from Vertiv Co., Ltd.! Before operating, please read the safety instructions and
precautions provided by Vertiv Co., Ltd. carefully. All the “Notes” in this manual do not represent the precautions to be
observed rather are also given as supplementary information. Only qualified trained personnel should be allowed to
install before operation. During operation, the operator must follow the safety rules as per the industry standard.
Styling used in the Guide
The styles used in this manual are defined in the following table:
Situation Description
Warning/Danger/Caution
The Warning/Danger/Caution note indicates a hazardous or potentially harmful situation that can
result in death or injury. It also indicates instructions that need to be adhered to,
failing which may
result in danger and safety issues, thereby ha ing an ad erse effect on the reliability of the
de ice and security. E en for practices not related to physical injury, the content under the Warning
heading is used for precautions which need to be taken which, otherwise, could result in equipment
damage, performance degradation, or interruption in ser ice, follow the warning instruction.
Notes
The Note section indicates additional and useful information, including tips and tweaks. It also calls
attention to best practices and industry-best protocols that are standardized and help make
maximum utilization of the resources at hand. Helpful information related to the mainstream
content also comes under the Note heading helping the users get to grips with the definitions,
concepts, and terminologies used in the manual.
Version History
Issue Revision Date Issue Changes
1.0 04-01-2019

Table of Contents
Vertiv | VE Series Rack | ser Manual
Table of Contents
Chapter 1: Product Overview ........................................................................................................ 3
1.1. Model Description ............................................................................................................................................... 3
1.2. Specifications ....................................................................................................................................................... 3
1.3. Features ............................................................................................................................................................... 4
1.4. Appearance and Components ............................................................................................................................ 6
1.5. Standard Configuration ....................................................................................................................................... 6
1.6. Optional Accessories ............................................................................................ Error! Bookmark not defined.
Chapter 2: Pre-Installation Preparation ........................................................................................ 8
2.1. Installation Tools ................................................................................................................................................. 8
2.2. Threaded Accessories.......................................................................................................................................... 9
2.3. Transportation ..................................................................................................................................................... 9
2.4. npacking .......................................................................................................................................................... 11
2.5. Equipment Room Requirements....................................................................................................................... 15
Chapter 3: Installation Instructions ............................................................................................. 16
3.1. Adjusting the EIA Rails ...................................................................................................................................... 16
3.2. Adjusting PD /Cable Management Bracket (optional) .................................................................................... 18
3.3. Removing and Replacing the Side Panel (optional) ......................................................................................... 18
3.4. Removing and Replacing the Top Cover ........................................................................................................... 21
3.5. Adjusting the Bottom Panel (optional) ............................................................................................................. 23
3.6. Removing the Front and Rear Door .................................................................................................................. 23
3.7. Rack Grounding Points ...................................................................................................................................... 25
3.8. Rack Main Grounding Points ............................................................................................................................ 28

Vertiv | VE Series Rack | ser Manual
Table of Contents
3.9. Adjusting the Feet and Leveling the Rack ........................................................................................................ 29
3.10. Removing the Feet and Casters (optional) ....................................................................................................... 30
3.11. Baying the VE Rack ............................................................................................................................................ 30
3.12. Installing and Removing the Floating Nut ........................................................................................................ 32
3.13. Fixing the Rack on the Floor ............................................................................................................................. 33
3.14. Toxic and Harmful Substances or Element Identification Table ........................................................................ 34

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Chapter 1: Product verview
VE Series rack (referred to as the rack) is a high-quality rack manufactured by Vertiv Co., Ltd. for the installation and
placement of 19-inch rack hardware equipment in accordance with industry standards (EIA-310-E). It also includes
servers, voice, data, internet network equipment, PS and batteries, etc. which are used in indoor environments such as
data centers or computer rooms.
This chapter introduces model description, specifications, features, appearance and components, standard configuration
and optional accessories.
1.1. Model Description
The model description of the rack is shown in Figure 1-1.
Figure 1-1 Model Description
1.2. Specifications
The apparent size of the rack is shown in Figure 1-2 and its specifications are shown in Table 1-1.
Figure 1-2 Rack Appearance Dimensions

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Table 1-1 Rack Specifications
Item Number Product Model
Dimensions
(WxDxH, in mm)
Installation
Height
(1U=44.45mm)
Flat Pack Rack (Knock Down & pack into 5 cartons)
01230840 SR-V061120SF 600x1100x2000 42U
01230841 SR-V061122SF 600x1100x2253 48U
01230842 SR-V061220SF 600x1200x2000 42U
01230843 SR-V061222SF 600x1200x2253 48U
01230844 SR-V081120SF 800x1100x2000 42U
01230845 SR-V081122SF 800x1100x2253 48U
01230846 SR-V081220SF 800x1200x2000 42U
01230847 SR-V081222SF 800x1200x2253 48U
Fully Assemble Rack, Build up with Pallet, without outer carton
01230848 SR-V061120SA 600x1100x2000 42U
01230849 SR-V061122SA 600x1100x2253 48U
01230850 SR-V061220SA 600x1200x2000 42U
01230851 SR-V061222SA 600x1200x2253 48U
01230852 SR-V081120SA 800x1100x2000 42U
01230853 SR-V081122SA 800x1100x2253 48U
01230854 SR-V081220SA 800x1200x2000 42U
01230855 SR-V081222SA 800x1200x2253 48U
1.3. Features
Convenient Configuration
• Available in a wide range of sizes for flexible configuration of rack and it’s accessories according to different
application requirements.
• The feet of the rack can be adjusted up and down.
• Mounting EIA rails for quick adjustment.
• Tool-less mounting of top cover.
• 42 rack contains casters that can smoothly pass through standard-sized room door.
• Baying the VE rack only needs one rear door to be removed.
• Compatible with top and bottom cabling mode, convenient on-site wiring.
• Installation and disassembly are convenient by using built-in side panel.
• Supports a variety of rack-based cold aisle solutions, such as SmartAisle.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Plentiful Accessories
• The bottom panels are optional accessories.
• PD /Cable Management Bracket supports a variety of PD installation methods (does not occupy the rack internal
height installation space and the manual operating space in front and rear of the rack).
• Provide a variety of rack accessories to meet the different application needs of the server room site.
Excellent Function
• Front and rear door integrated bending forming, beautiful, durable, high rigidity and strength.
• Dynamic load: 1000kg, Static load: 1 6 00kg.
• Front and rear door through hole rate of 75%, to meet the high heat density of heat dissipation needs.
• nified color of RAL 7021 is used for rack & accessories.
• Intelligent door lock (specific type) installation is compatible with front door.
• Front and rear door locks and side panel lock keys can be overridden by master key.
• The front door can be reversed to fit with left or right opening.
• Reliable grounding of all parts of the rack to ensure safe operation.
• Meets RoHS environmental protection.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Appearance and Components
The appearance and components of the rack are shown in Figure 1-3.
• VE Series Rack User Manual (referred to as user manual) includes drawings with SR-V061120 as an
example. The appearance and configuration of the rack shall be based on the rack actually recei ed by
the customer.
• Any ersion upgrade in user manual, will not be notified.
4
5
6
7
8
9
3
2
1
Figure 1-3 Appearance and Components Diagram
The rack is mainly composed of the following components:
1 Rear Door 2 PD /Cable Management Bracket 3 Side Panels
4 Top Cover 5 Frame 6 EIA Rails
7 Front Door 8 Bottom Panel (optional) 9 Feet & Caster (included in all model
of VE rack)
1.4 Standard Configuration
The standard configuration list for rack is shown in Table 1-2.
Table 1-2 Standard Configuration ist (unit: pcs)
Model Frame Beam
EIA
Rails
Side
Panel
Top
Cover
Front
Door
(mesh)
Rear Door
(mesh)
Bottom
Panel
PD /Cable
Management
Bracket
SR-V061120SF 2 4 4 4 1 1 2 NA 2
SR-V061120SA 2 4 4 4 1 1 2 NA 2
SR-V061122SF 2 6 4 4 1 1 2 NA 2
SR-V061122SA 2 6 4 4 1 1 2 NA 2

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Model Frame Beam
EIA
Rails
Side
Panel
Top
Cover
Front
Door
(mesh)
Rear Door
(mesh)
Bottom
Panel
PD /Cable
Management
Bracket
SR-V061220SF 2 4 4 4 1 1 2 NA 2
SR-V061220SA 2 4 4 4 1 1 2 NA 2
SR-V061222SF 2 6 4 4 1 1 2 NA 2
SR-V061222SA 2 6 4 4 1 1 2 NA 2
SR-V081120SF 2 4 4 4 1 1 2 NA 2
SR-V081120SA 2 4 4 4 1 1 2 NA 2
SR-V081122SF 2 6 4 4 1 1 2 NA 2
SR-V081122SA 2 6 4 4 1 1 2 NA 2
SR-V081220SF 2 4 4 4 1 1 2 NA 2
SR-V081220SA 2 4 4 4 1 1 2 NA 2
SR-V081222SF 2 6 4 4 1 1 2 NA 2
SR-V081222SA 2 6 4 4 1 1 2 NA 2

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Chapter 2: Pre-Installation Preparation
This chapter introduces the preparation of rack prior to installation, including installation tools, accessories,
transportation, unpacking, and equipment room requirements.
2.1. Installation Tools
Floating Nut Hook
Floating nut hook (accessory included) is mainly used to install floating nuts, as shown in Figure 2-1. For specific
usage methods, refer to section “3.12. Installing and Remo ing Floating Nut”.
Figure 2-1 Floating Nut Hook
Other Installation Tools (user-owned)
The schematic diagram of the other installation tools is shown in Figure 2-2 and its usage purpose is mentioned in Table
2-1.
tility Knife Phillips
Screwdriver Active Wrench Sleeve Wrench Gradienter Allen Wrench
Figure 2-2 Other Installation Tools
Table 2-1 Usage of Other Installation Tools
Name sage
tility Knife Disassembly outside the rack packaging.
Phillips Screwdriver Tighten the screws when assembling the parts of the rack.
Active Wrench Adjusting and removing casters and feet.
Sleeve Wrench Remove hexagonal screws or bolts from casters and pallet fixtures.
Gradienter Display its horizontal status when leveling the rack.
Allen Wrench sed to adjust the rack feet.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
2.2. Threaded Accessories
The threaded accessories are shown in Figure 2-3 and its usage purpose is mentioned in Table 2-2.
M6 Screw Floating Nut M5 Sinking Head
Screw
Figure 2-3 Threaded Accessories Table 2-2
Threaded Accessories Usage
Name sage
M6 Screw sed in conjunction with floating nuts for equipment installation.
Floating nut sed in conjunction with M6 screws for equipment installation.
M5 Sinking head screw sed to secure rack parts in a rack.
2.3. Transportation
Rail, road, and shipping are the preferred transport options for transporting the whole packaged rack. If transport by rail
or ship is unavailable, transport by road is recommended. When selecting road transport, roads without too many
bumps are strongly recommended. The entire packaged rack is shown in Figure 2-4, it’s size and weight is shown in
Table 2-3.
Figure 2-4 Whole Package Rack

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Table 2-3 Size and weight range of the entire packaging rack
The user is required to ship the rack to the nearest place of the installation site. Mechanical handling tools, such as hand
pallet truck or electric forklifts, are recommended for unloading and handling heavy rack, as shown in Figure 2-5.
Handle pallet truck Electric Forklift
Figure 2-5 Mechanical Handling Tools
When handling and unloading with an electric forklift, it is recommended that the fork to be in the center of gravity
position to prevent dumping. When handling, ensure that the maximum tilt angle on both sides of the rack does not
exceed 15°, see Figure 2-6.
<
1
5
°
Figure 2-6 Maximum tilt angle on both sides of the rack (front view)
Model
Size Range (in mm)
Weight
Range (in
kg)
H W D
SR-061120SA 2135
700
1200 131
SR- 061122SA
2380
149.5
SR- 061220SA 2135 1300 143.5
SR- 061222SA
2380
155
SR- 081120SA 2135
900
1200
167.5
SR- 081122SA
2380
182.5
SR- 081220SA 2135
1300
172.5
SR- 081222SA
2380
188.5

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
2.4. Unpacking
The procedure to open the packaged rack is as follows:
1. Move the packaged rack to a horizontal open, firm ground.
2. Inspect whether the rack of assembled package has any obvious damages during transportation. If any
damage is found, please contact the carrier immediately.
3. se a utility knife to remove the extension film wrapper on the rack.
Removing the Pallet
2000mm and 2253mm height rack are fixed in the same ways on the pallets by using pallet fixtures.
Pallet disassembly for Racks with castors and feet:
Loosen the M6 combination screws and M10 bolts on the pallet fixture with a hexagonal sleeve wrench and remove the
pallet fixture as shown in Figure 2-7.
Fixtures of pallet
Fixing screw of M10(4 pcs)
Fixing screw of M6 （ 6 pcs
）
Figure 2-7 Disassembly of Pallet Fixtures
The procedure to remove the pallet is as follows:
1. Place a wooden board of about 1200mm on the pallet.
2. Slide the rack carefully towards the wooden board from the rear of the pallet through the caster and feet of the
rack, then slide slightly to the ground, as shown in Figure 2-8.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Wood board
Castor and feet
Rack
Pallet
Figure 2-8 Removing the Pallet
Pallet disassembly for Rack without castors and feet:
1. se a hexagonal sleeve wrench (user-owned) to remove the M8 screws or bolts from the hole as shown in
Figure 2-9, with a total of four bolts or screws in the front and rear.
Fixing screw (4 pcs)
A
A amplified
Pallet
Overlook
Figure 2-9 Pallet Disassembly Diagram
2. As shown in Figure 2-10, VE series racks are equipped with four M12 hoisting threaded holes at the top of the rack
(hoisting ring needs to be owned by the user) to remove the 2200mm height rack from the pallet using cranes or
other booster equipment, as shown in Figure 2-11. During the disassembly personal safety must be taken into
consideration, prevent rack from dumping in order to avoid serious injury to people.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
Hoisting
threaded
hole 1
Hoisting
threaded
hole 4
Hoisting
threaded
hole 2
Hoisting
threaded
hole 3
Figure 2-10 Rack Hoisting Hole
Pallet
Figure 2-11 Removing the Pallet

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
3. After disassembling the pallet, remove four hole plugs from the accessory bag, plug (2 pcs) in the rack front and rear
door frames as shown in Figure 2-12.
Hole plug Hole plug
Figure 2-12 Hole Plug Head Mounting
•
Please be careful to mo e the rack through its casters. Mo e the rack from its front or rear.
If
mo ing
the rack from its side, the rack may ha e the risk of toppling o er.
• By default the feet adjustment in VE series rack at factory is at the highest position.
• Racks of 2200mm height do not contain casters and feet, pay high attention to safety during pallet
disassembly.
• After remo ing the pallets from 2000mm and 2200mm height rack, the rubber clasp should be remo ed
from the accessory bag and the hole at the bottom frame of the rack should be jammed.

Vertiv | VE Series Rack | ser Manual
Pre-Installation Preparation
2.5. Equipment Room Requirements
Environment
Ensure that the rack is installed away from any source of heat and sparkle. Avoid direct sunlight. The equipment room
should be clear of corrosive gas and organic solvent.
Space
Enough space to install rack should be reserved to facilitate the installation, maintenance, and cooling of rack. In VE
series rack, the front and rear door open at a maximum angle of 135°, the space required to open the rack front and
rear door is shown in Figure 2-13 (the figure shows 800mm wide, 1200mm deep rack).
• When installing the rack, the specific installation design should be based on the air conditioner
system and air-duct circulating system in the equipment room.
135°
135° 135°
1615mm
2373mm
Figure 2-13 Space required to open the front and rear door of the rack (overlooking, unit: mm)
Ground Smoothness and Weight-bearing Capacity
The product installation floor must ensure the desired level, the maximum deviation is less than 0.6mm/m. The
weight-bearing capacity of the equipment room must be considered before installation due to heavy rack. Generally,
the required weight-bearing of the equipment room is 1000Kg/m
2
. However, the rack’s internal bearing equipment is
different and the weight-bearing requirements of the equipment room are also different. To estimate the
requirements, please consult the nearest Vertiv Co., Ltd. office or service center.

Vertiv | VE Series Rack | ser Manual
Installation Instructions
Chapter 3: Installation Instructions
This chapter introduces the installation of each part of the rack. Before installing, ensure that the installation tools and
accessories are in place, and then follow the contents of this chapter. To adjust the relevant parts of the rack, refer to
the installation instructions of the corresponding parts for more information.
• When installing, wear glo es to keep the rack surface clean.
• Do not scratch the rack surface during installation.
• Pay attention to personal safety during installation.
3.1. Adjusting the EIA Rails
EIA Rail Installation at Factory Mounting Location
The factory mounting position of the EIA rail is shown in Table 3-1, and the distance between the two EIA rail sets can be
adjusted according to the equipment requirements.
Table 3-1 Factory Mounting Position of the EIA Rail
Rack Width (W) x
Depth (D) (mm)
Distance between front rail
and inner surface of front
door panel (mm)
Front and Rear Rail
Spacing (mm)
600 x 1100 87.5 734
600 x 1200 87.5 734
800 x 1100 225 634
800 x 1200 225 734
Adjusting the EIA Rail
The EIA rails are divided into left rail and right rail. Please confirm the silkscreen of L and R on the bottom of the EIA
rails before the installation. The diagonal rail structure of the rack is identical. The EIA rail adjustment method is
suitable for 600mm and 800mm wide rack.
The adjustment steps for EIA rails are as follows:
1. As shown in Figure 3-1, use a screwdriver to loosen four M5 combination screws (2200mm height rack with three
adjusting fixtures and six M5 combination screws for reference), move the right front EIA rail from position A
(factory mounting position) to position B (user desired position), use M5 combination screws to lock the EIA rails.

Vertiv | VE Series Rack | ser Manual
Installation Instructions
A
B
A amplified
B amplified
Position A
Position B
Fixing screw of M5
Fixing screw of M5
Adjusting fixture
Adjusting fixture
Figure 3-1 EIA Rail Adjustment
2. The left front EIA rail can be moved by using the same method as mentioned in step 1, so that the left front EIA rail
is aligned with the right front EIA rail, as shown in Figure 3-2, the mounting hole spacing on the crossbeam is
12.5mm, and the silkscreen on the upper crossbeam helps to adjust the alignment of the left and right EIA rails.
12.5mm
Silk-screen on
the crossbeam
Figure 3-2 Diagram of Crossbeam Silkscreen
3. se the same method mentioned in steps 1 and 2 to adjust the remaining two EIA rails.