Vestal RESTRICTOR User manual

RESTRICTOR

WARRANTY
Your VESTAL limited warranty covers defects in materials and workmanship
for a period of three years from the date of purchase. The warranty does not
cover the watch case, battery, strap, bracelet, crystal and crown. Damage
resulting from improper use, accidents, and normal wear and tear is not
covered. Water damage is not covered unless the watch is marked 10 atm
water resistant. VESTAL's warranty is void if the product is disassembled in
any manner by any party other than a certified watch repair professional.
CARING FOR YOUR WATCH BAND
If your watch band is made of leather, try to avoid getting it wet. Water will ruin
the leather. In the event that the leather band needs to be replaced, VESTAL
has a limited supply of replacements that can be sold back to you.
To keep the integrity of the exclusive design of your Vestal watch, we do not
switch bands on watches for other material types or colors. If your VESTAL
watch is equipped with a stainless steel band and it has been exposed to salt
water, rinse band in fresh water soon after exposure.

In most cases, if you watch stops then it is time for battery replacement.
Contact a certified watch repair specialist to have them install a new battery.
Always request the watch repair specialist to lubricate and reseal caseback and
crown to ensure original water resistance is maintained.
A quick reference guide to help you understand the water resistance ratings
for watches and the various activities you can expose your watch to without
water damage is below. Watches, no matter what the water resistance is,
should not be worn in any hot tub, hot shower, sauna or steam room.
3 ATM = Splash Resistant
Suitable for a light rain or drizzle.
5 ATM = Water Resistant
Suitable for a rain, water balloon fight, or wading in a pool.
10 ATM =Water Sports Worthy
Suitable for swimming, surfing, diving up to 100 meters.
30 ATM=Submarine Worthy
Suitable for extreme depths of up to 300 meters.

DISPLAY AND CROWN/BUTTON OPERATION
Stopwatch 1/10 Second hand
(Move in 1/10 second increments)
Hour hand
Minute hand
Crown at first
extended position
*Date Setting
Crown at second
extended position
*Time setting
Stopwatch second hand
(Move in second increments)
Second hand
Stopwatch minute hand
(move in minute increments)
* The measured time is indicated by the stopwatch hands that move independently of the
counter hands.
* Stopwatch 1/10 second hand moves for the first minute. After one minute, it indicates the
measured time when it is stopped.
0
SEC1/10
SEC
60
1050
2040
30
02
02
04
06
06
04
08
08
0
60
1545
30
MIN
Crown at normal position
Button (A)
*In stopwatch function Start/Stop
Button (B)
*In stopwatch function Split/Split release/Reset

ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the Stopwatch 1/10 second, second and minute hands are
at the “0” (12 o’clock) position. If the stopwatch is in use, press the button in the following order
to reset it, and then check if the hands return to “0” position. For detail see “HOW TO USE
STOPWATCH”.
If the stopwatch is counting: (A) ----------> (B)
If the stopwatch is stopped: (B)
If the split time is displayed: (C) ----------> (A) ------------> (B)
*If either of the stopwatch hands are not at the “0” position, reset them following the procedure below:
0
SEC1/10
SEC
60
1050
2040
30
02
02
04
06
06
04
08
08
0
0
SEC1/10
SEC
60
1050
2040
30
02
02
04
06
06
04
08
08
0
1. Pull out the crown to the
second position.
2. Press button (A) or (B) to reset the
stopwatch 1/10 second, second and minute
hands to “0” position.
*By pressing button (A), set the stopwatch
1/10 second hand
*By pressing button (B), set the stopwatch
second and minute hands.
*The stopwatch minute hands moves
correspondingly with the stopwatch second
hand.
*The hands move quickly if the respective
buttons are kept pressed.
3. Push the crown back to the
normal position.
Crown
Stopwatch second hand
Stopwatch
minute hand
Stopwatch 1/10
second hand
0
SEC1/10
SEC
60
1050
2040
30
02
02
04
06
06
04
08
08
0
60
1545
30
MIN
60
1545
30
MIN
60
1545
30
MIN