VESTEL 466-ELECTRONIC User manual

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
Di l d t l l
Di
sp
l
ay an
d
con
t
ro
l
pane
l
1. Indicator and bar of Super Freeze mode
2. Indicator and bar of Super Cool mode
3. Adjustment indicators and bars of freezer.
Th ti tti l ill b ill i t d
Th
e ac
ti
ve se
tti
ng va
l
ue w
ill
b
e
ill
um
i
na
t
e
d
.
All bars from minimum up to the relative
setting value will be illuminated.
4. Adjustment indicators and bars of cooler.
The active setting value will be illuminated.
All bars from minimum up to the relative
setting value will be illuminated.
2
1
5. It enables the setting value of freezer to
be modified and Super Freeze mode to be
activated if desired.
Freezer may be set to -16, -18, -20, -22, -24 °C.
6. It enables the setting value of cooler to be
modified and Super Cool mode to be
activated if desired.
43
activated
if
desired.
Cooler may be set to +2, +4, +5, +6, +8 °C.
7. It activates Drink Cool mode. The
expression will be illuminated when it is
active.
8. It activates holiday mode. The expression
will be illuminated when it is active.
9. It activates economical mode. The
expression will be illuminated when it is
active.
10. Alarm and SR will light red and audible
alarm will be released when any problem
occurs in the fridge. Audible alarm will be
deactivated when pressed on alarm button
7
8
56
deactivated
when
pressed
on
alarm
button
.
Red warning lights will continue to light up
until the problem is corrected/eliminated.
11. In case the mains voltage is low, Alarm
and LV will light red and audible alarm is
released. Audible alarm will be deactivated
when pressed on alarm button. Red
warning lights will go off when mains
8
9
1110
JULY 2011
warning
lights
will
go
off
when
mains
voltage raises the appropriate level.

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
O/Offbtt
O
n
/
Off
b
u
tt
on
It cuts the power of appliance by pushing on-off switch.
After the appliance is plugged, all symbols will appear for 2
seconds, and then the startup values will appear as -18°C on
freezer setting indicator and +4°C on cooler setting indicator.
A
ll buttons on the control
p
anel are touch-o
p
erated.
(
Onl
y
p
p(y
press to activate the button you want to operate.)
Wh
e
n w
ou
l
d
i
t
be
used
?
Super Freeze Mode
e ou d t be used
• For freezing a large amount of food (too large to be fitted in
the Super freezer).
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How would it be used?
• Press button F until letters "SF" and relative bar
graphic light up.
• If pressed on no button in 1 second, SF and bar
graphics will flash 3 times and a beep sound will
be released.
• SF and relative bar graphics will be displayed
during this mode.
During this mode:
• Maximum amount of fresh food (in kg) that can be frozen in 24 hours is indicated on
the appliance
•
Maximum
amount
of
fresh
food
(in
kg)
that
can
be
frozen
in
24
hours
is
indicated
on
the
appliance
label.
• For optimum appliance performance to reach maximum freezing capacity, set active SF mode 3
hours before placing fresh food in the freezer.
• 3 hours after being activated, your refrigerator starts giving signals. This signal tells that the quick
freezer compartment is ready for the foods to be placed in it. Your refrigerator will give intermittent
beep sounds for 1 minute in every 5 minutes; provided that the doors are not opened, this signal
g
ivin
g
will last 1 hour. When this sound is heard, foods to be frozen must be placed awa
y
from the
gg
y
already frozen ones. When the door of the freezer or cooler is opened, this signal stops. When your
foods are cooled enough, your refrigerator will automatically go out of the quick freezing mode.
• After a period of maximum 24 hours after the function is activated, the freezing process will be
completed.
• Freezer may be adjusted, Super Freeze will be cancelled and the selected setting values will
proceed.
• Temperature of super cool and cooler may be adjusted. In this case, super freeze mode continues.
E i l d H lid d b l t d S F M d ill b ll d
dth
JULY 2011
•
E
conom
i
ca
l
an
d
H
o
lid
ay mo
d
es can
b
e se
l
ec
t
e
d
.
S
uper
F
reeze
M
o
d
e w
ill
b
e cance
ll
e
d
an
d
th
e
selected mode is enabled.
• When "Super Freeze" is active, SF can be re-selected and cancelled by pressing on button F.
Note: “Super Freeze” mode will be automatically cancelled after 24 hours or freezer sensor
temperature is lower than -32 oC.

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
SClMd
S
uper
C
oo
l
M
o
d
e
When would it be used?
• To cool fast food before eating.
• To cool and store and lots of food.
• To cool drinks quickly.
How would it be used?
• Press button R until letters
"
SC
"
and relative bar
•
Press
button
R
until
letters
SC
and
relative
bar
graphic light up.
• If pressed on no button in 1 second, SC and bar graphics
will flash 3 times and a beep sound will be released.
• SC and relative bar graphics will be displayed during this
mode.
• When you use super cool mode, existing fresh food in
refri
g
erator com
p
artment can reach to much more coolin
g
gp
g
for a brief period. After this mode, the fresh food will turn back to normal temperature.
• And if needed you can use this mode again.
During this mode:
• Cooler may be adjusted, Super Cool will be cancelled and the selected setting values will proceed.
• Temperature of super freeze and freezer may be adjusted. In this case, super cool mode continues.
• Economical and Holiday modes can be selected. Super Cool Mode will be cancelled and the
selected mode is enabled.
Wh "S C l" i ti SC b
ltd d lldb i
btt R
•
Wh
en
"S
uper
C
oo
l"
i
s ac
ti
ve,
SC
can
b
e re-se
l
ec
t
e
d
an
d
cance
ll
e
d
b
y press
i
ng on
b
u
tt
on
R
.
Note: “Super Cool” mode will be automatically cancelled after 12 hours or cooler sensor
temperature is lower than 0°C.
Economy Mode
Freezer and Cooler operate in the economical conditions that
are determined in the control unit.
Wh ld it b d?
Wh
en wou
ld
it
b
e use
d?
• When you want your fridge to operate economically.
How would it be used?
• Touch button ECO.
• ECO will start flashing
• If pressed on no button in 1 second, the symbol will flash
3 times and a beep sound will be released.
•
When this mode is active ECO symbol stays on
When
this
mode
is
active
,
ECO
symbol
stays
on
.
• -18 and relative graphic bar will be displayed on Freezer
• +4 and relative graphic bar will be displayed on Cooler
During this mode:
• Freezer may be adjusted, Economical Mode will be cancelled
and the selected setting values will proceed.
• Cooler may be adjusted, Economical Mode will be cancelled and the selected setting values will proceed.
• Super Cool and Super Freeze modes can be selected, Economical mode is automatically cancelled
JULY 2011
and the selected mode is activated.
• Holiday mode can be selected. Economical mode is automatically cancelled and the selected mode is
activated.
• To cancel, you will just need to press on button ECO.

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
H lid M d
H
o
lid
ay
M
o
d
e
When would it be used?
• If you are going to a long vacation, and want to empty the
cooler , you can use this mode.
How would it be used?
• Touch button VACATION.
• VACATION will start flashin
g
.
g
• If pressed on no button in 1 second, the symbol will flash
3 times and a beep sound will be released.
• When this mode is active, VACATION symbol stays on.
• Indicators and bar graphics of freezer and cooler will be off
• No adjustment can be carried out without cancelling
Holiday Mode.
• To cancel, you will just need to press on button VACATION.
Y f id ill ti t t i th i tti l
•
Y
our
f
r
id
ge w
ill
con
ti
nue
t
o opera
t
e
i
n
th
e prev
i
ous se
tti
ng va
l
ues
Drink Cool Mode
When would it be used?
• This mode is used to cool the drinks within
adjustable time.
How to use?
How
to
use?
• Press DCOOL button.
• Press DCOOL button to adjust the time
05 minutes -> 1. bars;
10 minutes -> 2. bars;
15 minutes -> 3. bars;
20 minutes -> 4. bars;
25 minutes -> 5. bars;
30 minutes -> 6. bars are lighting;
• When you select the time the numbers will blink 3 times on
screen and sound beep beep.
• If no button is pressed within 2 seconds the time will be set.
• The countdown starts from the adjusted time every 5 minutes , 1 bar will disappear.
• At the end of adjusted time , display will give visual and voice alarm.
• To cancel this mode press D.COOL set button.
Note : You must adjust the time according the temperature of bottles before you put in
Note
:
You
must
adjust
the
time
according
the
temperature
of
bottles
before
you
put
in
.
• For example, at begining you can adjust to "5 min". After this period if this cooling is not sufficient,
you will can again 5 or 10 or etc minute.
• When you use this mode, you must check temperature of bottles regularly. And the temperature of
bottles will reach to sufficient level, you must remove these bottles from your appliance.
• If you forget the bottles in quick drink, can explode.
Friendl
y
li
g
htin
g
JULY 2011
yg g
• This mode is for energy saving.
• The lamps of your appliance will not be lightened if the area that you placed the
appliance has enough luminance to be able to see inside of appliance.

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
Function of Child Lock
When would it be used?
• To prevent children from playing with the buttons and changing the settings you have made,
child lock is available in the appliance.
Activating Child Lock
• Press on Freezer (F) and Cooler (R) buttons simultaneously for 5 seconds.
Deactivating Child Lock
Deactivating
Child
Lock
• Press on Freezer (F) and Cooler (R) buttons simultaneously for 5 seconds.
Note: Child lock will also be deactivated if electricity is interrupted or the fridge is unplugged.
Light Cancelling Mode
When would it be used?
•
If you want to cancel lights of cooler, you can select this mode.
If
you
want
to
cancel
lights
of
cooler,
you
can
select
this
mode.
• Press on Freezer (F) and Cooler (R) buttons simultaneously, and open and close the cooler door 3
times. The mode will be selected in this way. From now on, the lights will not come on when freezer
and cooler doors are opened.
• If you want to cancel this mode, repeat the same process or the mode will automatically cancel itself
after 24 hours.
Screen Saver Mode
• This mode can be selected for energy saving.
• Press D.COOL button for 3 seconds continously.
• After 3 seconds, the mode will be set and sound as beep beep.
• During screen saver mode, the lighting of display will be off.
• When we open door or press any button, the lighting of display will be on for 5 seconds,
then it will be off again.
• Press D.COOL button for 3 seconds for cancelling this mode.
Entering Demo mode:
•Firstly the power is on , secondly within 1 minute user will push R button and, open and close
refrigerator room 3 times at the same time for 5 seconds or Pushing F+D.Cool button together , Then
appliance will go on
“
demo function
”
and the demo will light during the mode
Demo Mode
appliance
will
go
on
demo
function
and
the
demo
will
light
during
the
mode
.
•All functions can be adjusted to show how they are adjusted to the customer.
•To show alarm function, these will be used:
•1st pushing to Alarm Button: Alarm + SR lights
•2nd pushing to Alarm Button: Alarm + LV lights
•3rd pushing to Alarm Button: Nothing lights
Canceling Demo mode:
For cancelling; Same operation will be used.
If user will push R button and, open and close
JULY 2011
For
cancelling;
Same
operation
will
be
used.
If
user
will
push
R
button
and,
open
and
close
refrigerator room 3 times at the same time or Pushing F+D.Cool button together , demo function will
be cancelled.
When appliance is Demo mode; if plug is removed or there is an elelctricty breakdown; demo mode
will continue with current settings after user plug into or electricity breakdown finish.

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
Cooler Temperature Settings
• Initial temperature value for the Cooler Indicator is +4°C.
• Press cooler (R) button once.
• When you first push this button, +2°C appears on the setting indicator
of the cooler.
• Whenever you press on this button one bar
comes on cooler bar
•
Whenever
you
press
on
this
button
,
one
bar
comes
on
cooler
bar
graphic indicator and lower temperature will be set. (+8°C, +6°C, 5°C,
+4°C, +2°C)
• When you push the cooler button until +2°C (maximum cold) appears
on the cooler setting indicator, and when you keep pushing, letters
SC (Super Cool) will flash.
• If you continue to press, it will restart from +8°C.
• The tem
p
erature value selected before Holida
y
Mode
,
Su
p
er Freeze
py
,p
Mode, Super Cool Mode or Economical Mode is activated will remain
the same when the mode is over or cancelled. The appliance continues
to operate with this temperature value.
Freezer Temperature Settings
• Initial temperature value for Freezer Setting Indicator is -18°C.
• Press freezer (F) button once.
• When you first push this button, -20°C appears on the setting
indicator of the freezer
indicator
of
the
freezer
.
• Whenever you press on this button, one bar comes on Freezer Bar
Graphic Indicator and lower temperature will be set. ( -16°C, -18°C,
-20°C, -22°C, -24°C)
• When you push the freezer button until -24°C (maximum cold)
appears on the Freezer Setting Indicator, and when you keep pushing,
letters SF (Super Freeze) will flash.
• If
y
ou continue to
p
ress
,
it will restart from -16°C.
yp,
• The temperature value selected before Holiday Mode, Super Freeze
Mode, Super Cool Mode or Economical Mode is activated will remain
the same when the mode is over or cancelled. Your appliance will
continue operating in this temperature value selected.
JULY 2011

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
Warnings about Temperature Adjustments
• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• It is not recommended that you operate your fridge in environments colder than 10°C in terms of its
efficiency.
• Temperature adjustments should be made according to the frequency of door openings and the
quantity of food kept inside the fridge
quantity
of
food
kept
inside
the
fridge
.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the ambient temperature without
interruption after being plugged in to be completely cooled. Do not open doors of your fridge
frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your fridge, when
you take the plug off and then plug it on again to operate it or when an
energy breakdown occurs
you
take
the
plug
off
and
then
plug
it
on
again
to
operate
it
or
when
an
energy
breakdown
occurs
.
Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards,
according to the climate class stated in the information label. We do not recommend operating your
fridge out of stated temperatures value limits in terms of cooling effectiveness.
ClimateClass Ambient(
°
C)
T16to 43
ST 16to38
N
16
to
32
N
16

to
32
SN 10to 32
Note: If the temperature of the environment is higher than 38°C, the freezer partition temperature
cannot be adjusted to -22°C and -24°C. It can only be adjusted to the values of -16°C, -18°C, -20°C.
JULY 2011

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
Cold Air
JULY 2011
Returning warm air

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
REFRIGERANT CYCLE DIAGRAM
REFRIGERANT
CYCLE
DIAGRAM
HOT PIPE
CONDANSER
EVAPORATOR
EXCHANGER
EXCHANGER
DRAYER
CAPILLARY TUBE
COMPRESSOR
CAPILLARY
TUBE
JULY 2011
9

Customer Support
SERVICE MANUAL
466-ELECTRONIC (ICE DISPLAY)
SPECIAL PROGRAMS
SPECIAL
PROGRAMS
When you first start the appliance
If the freezer and defrost sensors are warmer than –5ºC, then the automatic test starts. The below
listed components will be tested respectively with 5 second intervals.
• Middle sheet resistance for 5 seconds
Df th t f 5 d (Fi t it df t i it di lti
•
D
e
f
ros
t
h
ea
t
ers
f
or
5
secon
d
s
(Fi
n evapora
t
or res
i
s
t
ance,
d
e
f
ros
t
p
i
pe res
i
s
t
ance an
d
i
nsu
l
a
ti
on
mullion heater)
• Evaporator fan motor for 5 seconds
• Compressor for 5 seconds
After 5 seconds, the appliance will start to run.
Di l t t
FREEZER
-16°C 1 Bar
-18°C 2 Bar
Di
sp
l
ay
t
empera
t
ure
-20°C 3 Ba
r
-22°C 4 Bar
-24°C 5 Bar
REFRIGERATOR
+2°C 4 Bar
+4°C 3 Bar
+6°C 2 Bar
+8°C 1 Bar
JULY 2011