VEVOR ZG-18TL User manual

Technical Support and E-Warranty Certificate https://www.vevor.com/support
BACKDROP STAND
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
MODEL NO.: ZG-18TL
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Backdrop Stand

2
WARNING:
Please read this manual carefully before using the product. Failure to
do so may result in serious injury. SAVE THIS MANUAL
ASSEMBLY PRECAUTIONS
1. Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs or
medication.
6. The product capabilities apply to properly and completely assembled
products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Backdrop Stand.
8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap
and separate all parts in a clean work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this
item.
3. Do not exceed weight capacities.Please empty Backdrop Stand before
moving.
4. Use only on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Backdrop Stand.
5. Use as intended only.
6. Inspect before every use. Do not use if parts are loose or damaged.

3
TECHNICAL SPECIFICATIONS
Model ZG-18TL
Main Material Steel
Product Dimensions(L*W*H) 3148*400*3048 mm
Packing Size(L*W*H) 1195*355*80 mm
Net Weight (kg) 14.6kg
Gross Weight (kg) 15.6kg
PACKAGE CONTENTS

4
ASSEMBLY STEPS
STEP1
Connect E with F
STEP2
Insert D into A and align the holes

5
STEP3
STEP1 Stretch it to a suitable length and connected with STEP2 through B.
STEP4
The whole shelf is stretched to a suitable size

6
COMPLETION

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
REPEC
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,
Germany
REPUK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston,
United
Kingdom

Support and E-Warranty Certificate
www.vevor.com/support
Made In China