VEVOR EG-818US User manual

Commercial Electric Griddle
INSTRUCTION MANUAL
We continue to be committed to provide you tools with competitive price. "Save
Half", "Half Price" or any other similarexpressions used by us only represents
an estimate of savings you might benet from buying ceain tools with us
compared to the major top brands and doses not necessarily mean to cover all
categories of tools oered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually saving half in
comparison with the top major brands.

01
Commercial Electric Griddle
NEED HELP? CONTACTUS!
Have product questions? Need technical suppo? Please feel free to contact us:
CustomerSe[email protected]
This is the original manual, please read all the instructions carefully before operating.
VEVOR resees the right to interpret this user manual. The appearance of the product shall be subject to the
product you received. Product technology or fuher software updates are subject to change without notice.
MODEL NO.: EG-818US/EG-818EU/EG-818AU

02
IMPORTANT SAFEGUARDS
This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings
and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur.
Caution and common sense are not built into this product, since we believe that the uses will comply with these
codes.
Please read ALL the instructions before using your machine.
1. Make sure the voltage in your outlet is the same as the voltage indicated on the appliance's rating label.
2. Do not let children and minors get close to or touch the machine.
3. Do not touch the hot suace directly with your hands. Always use the handle or knob for operation.
4. To prevent electrical shock, do not immerse the cord or plug into water or other liquids.
5. Do not immerse the appliance in water or any other liquid.
6. Unplug the machine from the outlet when not in use and before cleaning. Cool the appliance before installing
or removing pas and before cleaning.
7. Cool down the HOT pas before operation.
8. Do not operate the device with damaged cord or plug, malfunction or with any mechanical damage. Send it to
your nearest authorized seice centre for examination and repair (ONLY technicians should open up the unit).
9. Using any accessories or attachments that are not provided or recommended by the manufacturer may cause
inju.
10. If the machine is not to be used for a long period of time, unplug it, clean and cover it and store it in a d
and safe place.
11. Do not leave the power cord hanging over the edge of table or counter or let it come into contact with any
hot suaces.
12. Do not place the unit on or near hot air, electric burners or heaters.
13. Always switch o the power to the socket before plugging in or unplugging. Hold the plug instead of pulling
on the cord.
14. Do not apply this unit to any other purposes than the indicated usage.
15. Do not use it outdoors or for commercial purposes.
16. KEEP IT OUT OF CHILDREN'S REACH.
17. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
18. Never leave it unattended while in use.
19. Always check that this machine is plugged into a grounded outlet with the appropriate electrical supply.
Ensure that the wall outlet being used is properly grounded. If not, you must install a grounded outlet. Have the
work peormed only by a ceied electrician who is properly qualied to meet local safety and electrical codes.
20. Ensure that the power outlet, plug and cord being used are in good working condition. Damaged
components should be repaired by a ceied electrician who is qualied to meet local safety and electrical
codes. Even if your power cord is functioning properly, keep it away from water and avoid letting it run over
carpets or heating devices.
21. Avoid using it in the presence of ammable liquids, gases, dust or other explosive situations.
22. Extreme caution must be taken when moving an appliance containing hot oil or other hot liquids.
23. Do not operate the machine in an appliance garage or under a wall cabinet. Always unplug the unit from the
electrical outlet when storing in an appliance garage. Otherwise, it would cause a risk of re, especially if the
machine touches the garage wall or the door touches it as it closes.
24. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its seice agent
or similarly qualied persons in order to avoid a hazard.
25. This appliance can be used by children aged from 8 years and above and persons with reduced physical,
senso or mental capabilities or lack of experience and knowledge if they have been given supeision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supeision.

03
Please read the following statements carefully and understand their meaning prior to use to
ensure safe operation.
HOUSEHOLD USE ONLY
Warning- To reduce the risk of iniu, user must read this intruction manual carefuly.
This symbol indicates a kind of precaution, warning, or danger. It is placed before a
safety comment, ingoring which may lead to an accident. To reduce the risk of inju,
re,or electrocution, please always follow the recommendations shown below.
This product is subject to the provision of European Directive 2012/19/EC. The symbol
showing a wheelie bin crossed through indicates that the product requires separate
refuse collection in the European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be discarded with normal
domestic waste, but must be taken to a collection point for recycling electrical and
electronic devices.
CAUTION: In order to avoid a hazard due to inadveent resetting of the thermal
cutout, this appliance must not be supplied through an external switching device,such
as a timer, or connected to a circuit that is regularly switched on and oy the utility.
NOTE:
1. Do not spray the electric griddle with a water hose under pressure.Do not spray liquids directly onto the control
panel (refer to tCare and Maintenance for details).
2. Do not place any pa of your body on electric griddle when the unit is turned on.
3. Do not operate the electric griddle next to any heat source or grease emitting appliance
4. Do not use the unit for any other purpose other than holding food.
5. Do not use sharp objects to activate controls.
6. Do not touch the tank element covers or elements when machine is hot.
7. Please be careful during use. Do not put non-food items into the product for heating and please use puried
water.
Thank you for using this product. In order to make sure that you can operate the machine correctly, read this
instruction carefully before operation and keep it properly for future reference. Please be sure to read the
precautions and safety rules in this page to ensure your safe use.

04
PRODUCT PARAMETERS
1600W/13.3Amps Full Flat
Hot Plate Suace Voltage
AC110V~120V
AC220V~240V
NEMA 5-15P Plug
European Plug
Australian Plug
Full Flat
Full Flat AC220V~240V
Plug Type
3000W/13.6Amps
3000W/13.6Amps
Input Power
Model No.
EG-818US
EG-818EU
EG-818AU
CIRCUIT DIAGRAM
NOTE:
1. The voltage used for this device must be the same as the power supply voltage.
2. Users need to install it near the power switch and fuse

05
1. Place the machine on a clean, d, level suace near a plug base outlet.
2. Plug the cord into the wall outlet, and the green indicator light will be on while power is supplied to the
machine.
3. Turn the temperature knob clockwise to adjust the temperature to the desired temperature. At the same time,
the yellow indicator light is on, indicating that the electric heater begins to heat up and the temperature of the
machine stas to rise.
4. When the temperature rises to the desired level, the heat controller will automatically cut o, while the yellow
indicator light goes out and the electric heater stops heating.
5. When the temperature is slightly lower, the heat controller will automatically energize, the yellow indicator
light will be on, the electric heater will work again and the temperature will rise.
6. After nished, for safety, please turn the temperature knob counterclockwise to the limit position and cut o
the power.
NOTE: It works in this way repeatedly in order to make sure temperature is ceain in a range.
1. When the food is ready, the user take them out gently with the shovel provided. Don't use metal to roll up or
take out the food, otherwise it will hu the suace of heating plate.
2. The oil drip tray can be used to collect the remaining oil or grease. It should be emptied frequently to avoid
ovelow.
TIPS & HINTSIONS
Daily:
After daily use, keep the griddle hot (at 300℉), and rub it clean with a grill brush or grill brick. Do not use
cleaning chemicals or soaps as these can be absorbed by the suace and/or seep into the gaps on the egdes of
the griddle and aect the avor of the food. If necessa, use only clean water, oil, and/or a food grade degreaser
for the cleaning process. Remove and empty the grease container, clean the grease trough and the unit's suace.
Cool down the unit and apply a thin coating of cooking oil if necessa to prevent corrosion.
Weekly:
Peorm the daily cleaning process. Allow the griddle to cool completely and thoroughly clean the griddle plate
with a food grade degreaser. Do not use cleaning chemicals or soaps as these can be absorbed by the suace
and/or seep into the gaps on the edges of the griddle and aect the avor of the food. Season the griddle per
the instructions in the Sta-up section. To prevent corrosion, please avoid the following situations: the griddle
remains unseasoned; a thin coating of cooking oil is not applied.
CAUTION:
1. NEVER IMMERSE CORD, PLUD OR UNIT IN WATER OR OTHER LIQUIDS.
2. In order to avoid a hazard due to inadveent resetting of the thermal cutout, this appliance must not be
supplied through an externalswitching device, such as a timer, or connected to a circuit that is regularly
switched on and o by the utility.
CLEANING AND MAINTENANCE
OPERATING INSTRUCTIONS
Before using the appliance for the rst time, peel o any promotional materials and packaging materials, and
check that the cooking plates are clean and free of dust. If necessa, wipe them over with a damp cloth. Spread
over with an absorbent kitchen towel and wipe o any excess oil. When your appliance is heated for the rst time,
it may emit slight smoke or odor, which is normal for many heating appliances, and will not aect the safety of
your appliance.

06
Possible Troubleshooting Cha
Problem Cause(s) Solution(s)
The power doesn't turn on after
the griddle is plugged in.
The thermostat indicator doesn't
work and the griddle doesn't heat
up.
The power indicator is on, but the
griddle doesn't heat up.
The temperature control is working,
but the power indicator is not on.
The power indicator goes wrong. Contact a qualied technician or an
authorized dealer.
The temperature control element
goes wrong.
Contact a qualied technician or an
authorized dealer.
1. Fail to be connected to the
heating element.
2. The heating element goes wrong.
1. Contact a qualied technician or an
authorized dealer for heating
element connection fault.
2. Contact a qualied technician or an
authorized dealer for heating element
fault.
1. The plug haven't been inseed in
the socket properly.
2. Fuse has blown.
1. Remove the plug and inse it
correctly.
2. Replace the fuse.
STORAGE
SAFETY AND TROUBLESHOOTING
1.Always unplug the machine before storage.
2.Always make sure the machine is cool and d before string.
Please note that the Electric Griddle will be too hot to handle immediately after use. If a problem occurs that
does not appear in the table below, stop using the fer and seek help from the manufacturer, a qualied
technician or an authorized dealer.
Made in China
Manufacturer: Guangzhou Yuesheng Catering Equipment Co., Ltd.
Address: No.3, Erheng Road, Dongsheng Road, ChadongCun,
Dalong Avenue, Panyu District, Guangzhou, China
Impoer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany
EC REP

E-mail: CustomerSe[e-mail]