VEVOR Y486 User manual

Y486/Y486BT Label Printer
สเเกนคิวอาโค้ดเพื่
อรู้วิธีการติดตั้ง
Scan kode QR untuk
mendapatkan tutorial
install
Imbas kode QR untuk
mendapatkan tutorial
install
User Manual
Scan QR code for
installation tutorial 扫码获得安装教程
Visit https://help.flashlabel.com to download driver and see installation
tutorial in multiple languages. Send E-mail to [email protected] for help!
Thank you for choosing our printer.
please read this manual carefully and keep it for future reference.
Quét mã QR để có
hướng dẫn cài đặt

16.Pay Attention To
10.LED Status
Content
..............
1.Quick Setup Guide
5.Windows Setup Via USB
8.Smartphone APP Setup
17.Contact US
15.Disposal
14.Specifications
13.Maintenance
12.Safety notices
11.Feeder Button Instructions
9.User Tips
6.Mac Setup Via USB
7.Chromebook Setup Via USB
4.Label Loading and Calibration
3.Printer Connection
2.Packaging List
5.1. Driver installation
6.2.Printer preference setting
6.1.Driver installation
5.2. Printer preference setting
01
02
03
05
07
07
09
11
11
13
15
17
21
22
23
23
24
25
25
26
20

Congratulations on your purchase of our Printer. We are your loyal
business partner offering commercial solutions to batch labels printing.
Please take a moment to read this user guide as incorrect operation
may result in unsatisfactory print quality, reduced user experience,
or even damage to your printer or injury.
Y486/Y486BT is a thermal label printer which uses thermal label
media without ink, toner and ribbon. It can print various labels for
logistics,pricing, barcodes, QR codes, shipping label, badges, etc.
Original instructions for Thermal Label Printer,please read all
manual instructions carefully before operating. We reserve clear
interpretation of our user manual. The appearance of the product
shall be subject to the product you received. Please forgive us that
we won't inform you again if there is any technology or software
updates on our product.
QUICK SETUP GUIDE
01

Packing List:
1x Label Printer
1x Power Cable and Adapter
1x USB-C to USB Adapter
1x Label Holder
10x Free Fanfold Labels
1x USB Printer Cable
1x User Guide 1x Service Card
Thermal printer head (TPH) may be very
hot.Please do not touch the printer head or
parts around it after printing.
PACKAGING LIST
02
Feeder Button
Status Light
Power Switch
Cover
Rubber Roller
Label Outlet
USB Port
Power Port
Thermal Printer Head(TPH)
Label Guide
Push Button

1.Ensure the power is OFF(Press down“O”means Power OFF)
2. Connect the USB cable.
(Special Note: For Windows users, please connect the same
USB port on your computer to aviod producing unwanted
duplicates of printer in your system).
PRINTER CONNECTION
03
Tips: For Mac users, you can purchase the USB-C to USB
adapter from our store at a discounted price.

3. Make sure the power adapter is tightly connected,
then connect the power cable to the printer's power
port and the electrical sockets.
4. Turn the power ON (Press down "-" means Power
ON)，now you will see the light flashing!
Must turn off the switch before you plugging
the power cable into power port each time
or it may cause sparks!
04

Y486/Y486BT is capable of working with labels in various sizes, and
it needs to learn your label properties before its first use.
To initiate Automatic Label Loading and run Intelligent Label
Calibration, please follow these steps:
Turn on the power and wait for about 5 seconds until the printer
is initialized.
Insert the label from the backside of the printer, the printer will
load the label and move back and forth, then stop with the green
light on. Not a single label will be wasted during this procedure.
It's suggested to adjust the label guide to match the width of the
label if necessary before the label is pushed in.
1.Power On
2.Automatic Label Loading
LABEL LOADING AND CALIBRATION
05

3.Intelligent Label Calibration
Press and hold the feeder button for about 3 seconds until you
hear one beep then release, the label will move back and forth
several times to calibration the label size, then you can start
printing.
Since the printer needs to measure the length of the thermal paper,
a stack of labels with at least 3 sheets is required to complete the
process.
06

5.1 Windows Setup Via USB
1.Before installation, ensure the printer is turned on, and USB cable is
connected to your computer.
2.Scan QR Code or visit https://help.flashlabel.com to download
driver and watch installation video.
Scan QR Code to download windows driver
3.Follow these steps to finish driver installation on Windows:
1).Open the "LabelPrinter-Windows-Driver-Latest.exe" file with a double-
click to start the installation process.
If the file is named "LabelPrinter-Windows-Driver-Latest.zip",
you need to decompress it to the .exe file.
2). Click "Install" follow the onscreen instructions.
WINDOWS SETUP VIA USB
07

3).Click "Next" and "Finish" to complete the driver installation.
Setup is now ready to begin installing Label Printer Installer Ver1.0.4 on
your computer.
Setup - Label Printer Installer Ver1.0.4
Setup - Label Printer Installer Ver1.0.4
Completing the Label Printer
Installer Ver1.0.4 Setup Wizard
Setup has finished installing Label Printer
Installer Ver1.0.4 on your computer. The
application may be launched by selecting the
installed shortcuts
08