
Maintenance:
You can vacuum out the inside of your machine to
remove ball fluff. The outside of the machine can be
wiped down with a mild detergent, however, please be
careful not to get water inside the machine. The throwing
wheels should be wiped down after every use to prevent
any buildup of residue from the balls.
Troubleshooting:
1. When the power button is pressed and the power is off,
follow the steps below:
A) Check that the battery is charging.
B) Check if the fuse is blown.
2. Press the power button, the power light does not light,
may be due to excessive current, battery start protection
If the battery protection lock occurs, the switch indicator
light does not light. Please turn off your machine, the
battery charge for 5 minutes can unlock the battery.
3. Clearing Ball Jams
If you find that a ball gets stuck behind the two throwing
wheels, the machine may shut down to prevent damage
to the circuit board. Please turn the machine off and clear
the ball jam.
4. Other fault conditions:
If you can not personally troubleshoot, or if any of the
above problems occur, please call our customer service
hotline for further processing.