VEVOR FSX004 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
COMMERCIAL EXHAUST HOOD
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation.
This instruction for Use applies to all models
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
COMMERCIAL EXHAUST HOOD

2
PRODUCT PARAMETERS
ASSEMBLY PRECAUTIONS
1. Assemble needs to follow these instructions. Incorrect assembly can be
a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
4. Weight capacity and other product capabilities apply to a properly and
completely assembled product only.
5. Keep the assembly area clean and well-lit.
6. Keep bystanders out of the area during assembly.
7. Installation ofthis unit should only be performed by a qualified
professional
Model
Product Size
Range hood filter grid
FSX004
4FT（120×76×53cm）
19.5"×19.5"×1.9"（2PCS）
FSX005
5FT（150×76×53cm）
24.5"x19.5"x1.9"（2PCS）
FSX006
6FT（180×76×53cm）
19.5"x19.5"x1.9"（3PCS）
FSX007
7FT（210×76×53cm）
24.5"x19.5"x1.9"（3PCS）
FSX008
8FT（240×76×53cm）
19.5"×19.5"×1.9"（4PCS）
FSX009
9FT（270×76×53cm）
19.5"×19.5"×1.9"（2PCS）
24.5"x19.5"x1.9"（2PCS）

3
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM
TIPPING:
1. This product is not a toy. Do not allow children to play with or approach
this item.
2. Use as intended only. Do not sit or stand on the product.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use on flat, level, and hard surfaces only.
5. Do not exceed the listed weight capacity. Tighten all knobs securely
before applying load. Be aware of dynamic loading! The sudden load
movement may briefly create an excess load, causing product failure.

4
PARTS LIST
NOTE: Part not shown to actual size.
X4
A
X4
X4
X4
C
D
E
B
F
X1
X1
G
H
X1
K
L
X1

5
ASSEMBLY STEPS
1.Install the left and right triangular bracket on the wall with expansion
screws
2.Fixed the range hood body on the left and right triangle bracket through
the screw combination

6
3.Attach the top 2 hanging rings in the mounting position
4、Install the grease receiving cup in a fixed position of the body
5.Install the lampblack filter grid in a fixed position of the body

7
6.Install the smoke exhaust pipe in the fixed position of the body
Cleaning
-For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry
with a clean lint free cotton cloth.

Support and E-Warranty Certificate www.vevor.com/support