VEVOR WT-0240 User manual

Support and E-Warranty Certificate
https://www.vevor.com/support
WATER STORAGE TANK
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

1
MODEL:WT-0240/WT-0330/WT-0540
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER STORAGE
TANK

2
NOTES
1. Keeping the outlet valve closed, fill in the liquid from the inlet valve on the top.
2. The diameter of the water injection tube should be less than 1.5" so that the air
in the tank can be discharged.
3. Ensure all accessories are firmly tightened by hand. Improper tightening of
accessories can lead to leakage.
MODEL AND PARAMETERS
Model
WT-0240
WT-0330
WT-0540
Capacity
240L
330L
540L
Material
PVC
PVC
PVC
Ambient
temperature
-30℃～+70℃
-30℃～+70℃
-30℃～+70℃
Color
Black
Black
Black
Product Size
100x70x35cm
120x80x35cm
150x90x40cm
TRUCTURE DIAGRAM
1.Top intake(1.5") 2.Hanging ring(It's actually at four corners)
3.Bag body 4.Scale

3
5.Drain valve(1.5")
COMPONENTS
No.
PART
NAME
QTY
1
Rain bag
1
2
Drain valve
1
3
Patch
2
4
User manual
1
USE AND CLEAN
1. After getting the product, unroll the rain bag.The water inlet is at the top.
2. Install water outlet valve(Clockwise tightening). The outlet valve is larger and
needs to be installed more forcefully until the valve is centered.
The status is off.

4
MAINTAIN AND STORAGE
1. Please use mild detergent and water for cleaning.
2. Don't scrub with hard objects like brushes.
3. Dry before storage.Do not store in a dark, damp place.
4. Clean the debris at the filter port in time to avoid clogging.
5. If the barrel body is damaged, it can be repaired with the attached patch (Please
bring your own glue).
6. If the joint is leaking, tighten the joint or wrap waterproof tape(Provide for
yourself) on the thread of the joint before installing it(As shown below).
Note: If you install and remove the connector yourself and the switch is not vertical,
try increasing the number of winding laps of waterproof tape.

5
Manufacturer: Haining Tak Techtextil Industries Co., Ltd.
ADD: No. 2, Qingyuan Road, Xieqiao Town, Haining City, Jiaxing City, Zhejiang
Province, China
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Made in China

Support and E-Warranty Certificate
https://www.vevor.com/support