VIA Technologies Vero User manual

Vero
user guide
205 Vista Boulevard, Sparks, Nevada 89434 lPhone: 800-443-6614 lviaseating.com
table of contents
pg. 3
pg. 1
pg. 2
pg. 4
pg. 5
pg. 6
51A/53A adjustable height arm with 4-ways adjustable cap option
67C control mechanism
67CSS with optional FT control mechanism
68C control mechanism
74C control mechanism
Vero ratchet back adjustment

775 331 6001
[e-mail]
www.viaseating.com
1
Vero
user guide
Additional Width Adjust-
ment(Only applies to 19AB):
Pull back on the “levers” under
the arms to unlock and extend
the arms outwards. Push forward
on the levers to lock.
To put them back to normal
simply just do the opposite.
Unlock (pull back on the lever)
and push the arms back in to
place, and lock the arms by
pushing the lever forward.
Arm height adjustment:
While lifting up on the
small “switch”, use your
hand grasping the arm
cap to raise and lower the
arm height.
51A/53A adjustable height arm with 4-ways adjustable cap option
Switch
(Lever)
Switch
(Lever)
Switch
(Lever)
Arm cap slide: Grasp
and slide arm cap
forward or backward,
sliding forward a max
of 2.5”.
Arm cap rotation: Grasp
and lift arm cap to turn left
or right, rotating a max of
15° each way.

Vero
user guide
775 331 6001
[e-mail]
www.viaseating.com
2
67C control mechanism
Right
knob
Seat height adjustment: Adjust
the seat height by lifting your
weight out of the chair and
pulling up on the “paddle”.
Proper seat height is realized
when the top of your legs are
somewhat parallel to the oor.
Single rotation back tilt lock
adjustment (5 position): Tilt the
seat back to desired angle and
twist the “right knob” slightly.
To unlock, twist the other way,
leaning back to unlock. The turn
is smooth. All tilt lock angles
can be reached within a single
turn of the handle.
Left
knob
Pull up
on paddle Pull up
on paddle
Back/recline tension adjustment:
Rotate knob right to increase tilt
tension. Rotate “left knob” left to
decrease tilt tension. Rotate within
a single rotation of the knob to
achieve any of the 7 distinct back
tension levels.

Vero
user guide
67CSS with optional FT control mechanism
775 331 6001
[e-mail]
www.viaseating.com
3
Right
knob
Left
knob
Seat height adjustment:
Adjust the seat height by
lifting your weight out of the
chair and pulling up on the
“paddle”. Proper seat height
is realized when the top
of your legs are somewhat
parallel to the oor.
Seat slider: Pull up on “paddle”
while shifting your weight forward
to move your seat forward or
backward to move your seat back.
Single rotation back tilt lock
adjustment (5 position): Tilt the
seat back to desired angle and
twist the “right knob” slightly.
To unlock, twist the other way,
leaning back to unlock. The turn
is smooth. All tilt lock angles
can be reached within a single
turn of the handle.
Back/recline tension adjustment:
Rotate knob right to increase tilt
tension. Rotate “left knob” left to
decrease tilt tension. Rotate within
a single rotation of the knob to
achieve any of the 7 distinct back
tension levels.
Pull up
on paddle
Pull up
on paddle
Pull up
on paddle
Pull up
on paddle
Forward tilt adjustment (FT): Push the “paddle” in
the down position and lean back in the chair. You
will hear a click when the forward tilt mechanism
has turned on. Sit in your normal position to use
the forward tilt feature. To turn off the forward tilt
feature, lift the paddle in the up position and lean
back in the chair. You will hear a click when the
forward tilt mechanism has turned off.
Pull up
on paddle
Pull up
on paddle

Vero
user guide
68C control mechanism
Right
knob
Seat height adjustment: Adjust
the seat height by lifting your
weight out of the chair and
pulling up on the “paddle”.
Proper seat height is realized
when the top of your legs are
somewhat parallel to the oor.
Single rotation back tilt lock
adjustment (5 position): Tilt the
seat back to desired angle and
twist the “right knob” slightly.
To unlock, twist the other way,
leaning back to unlock.
Left
knob
Back/recline tension adjustment:
Rotate knob right to increase tilt
tension. Rotate “left knob” left to
decrease tilt tension.
Seat slider (12SS): Pull up on
“paddle” while shifting your
weight forward to move your
seat forward or backward to
move your seat back.
Pull up left
paddle
Pull up left
paddle
Pull up
on paddle
Pull up
on paddle
775 331 6001
[e-mail]
www.viaseating.com
4

Vero
user guide
74C control mechanism
775 331 6001
[e-mail]
www.viaseating.com
5
Push the
button
Push the
button
Seat height adjustment: Adjust
the seat height by lifting your
weight out of the chair and
pulling up on the “paddle”.
Proper seat height is realized
when the top of your legs are
somewhat parallel to the oor.
Back lock adjustment (3 position):
Use the same paddle as you use
for the seat height adjustment.
To lock the chair in an upright
position, shift your weight forward
until the chair is in an upright
position, then push the “button”
in. To rock (free oat) shift your
weight forward and push the
button again.
Pull up
on paddle Pull up
on paddle
Optional seat slider (12SS): Pull
up on “paddle” while shifting
your weight forward to move your
seat forward or backward to move
your seat back.
Pull up
paddle
Pull up
paddle

Vero
user guide
775 331 6001
[e-mail]
www.viaseating.com
6
Vero ratchet back adjustment
Ratchet back adjustment: The “ratchet
back” is adjustable up and down. To
adjust the back simply just pull up or
push down on the back to the desired
hight (as you adjust the back you will
here the ratchet sound letting you
know each lock point). To unlock the
position pull the back up to its highest
point and then your able to push it
back down so it can be readjusted.
Ratchet back