6
LASER LIGHT SOURCE HANDLING RULES
Follow all the safety and control rules, regulation, procedures, and general
common sense VIBRO-LASER is not responsible whatsoever for any injuries,
loss of production or capacity, or any failure of any kind as a result of the
user/owner not following instructions as set forth in this manual, on product
labels, in their work area, or general industry practices and common sense.
Do take notice of any warning labels on the device and in the operation
manuals.
Lack of the consideration to such warning labels may cause personal injuries
and damage to the equipment.
Lithium ion batteries inevitably lose power during their lifetimes, depending
on usage temperatures and the number of charging cycles. Therefore, the
internal rechargeable batteries used in VIBRO-LASER products are not
included in our general 1-year warranty. There is 6 months warranty for the
battery capacity not to fall below 70 % (a normal change means that the
battery must have more than 70 % capacity after more than 300 charging
cycles). A 1 year warranty applies if the battery becomes unusable because of
a manufacturing fault or factors that VIBRO-LASER could be expected to have
control of, or if the battery displays abnormal loss of capacity in relation to
use.
VIBRO-LASER system uses laser diodes with 1.0 MW output capacity, which
complies with the Class 2 standards of SS-EN-60825-1-1994. This class is
considered to be safe for operation providing the following precautionary
measures are taken:
strictly follow safety rules during operation;
the device might be used only for its
intended purpose;
do not use the device if it or its parts
are damaged in any way;
do not open laser source blocks;
SAFETY INSTRUCTIONS
LITHIUM ION BATTERY LIMITED WARRANTY
