Victor Big Print 1310 User manual

VICTOR
BIG PRINT™
10 / 12 DIGIT HEAVY DUTY PRINTING CALCULATOR
INSTRUCTION MANUAL

2
BIG PRINT FEATURE
The Victor 1310 Big Print Calculator has two modes of operation. Use the 10 / 12 slide
switch to choose the mode of operation. If the slide switch is over the 10, the calculator will
operate as a 10 digit calculator with large print. When the switch is over the 12, the
calculator will operate as a 12 digit calculator with normal print size.
TABLE OF CONTENTS
1. OPERATIONS AND MAINTENANCE............................................................ 3
2. THERMAL PRINTER……………………………………………………………3
3. LOADING PAPER........................................................................................ 3
4. KEYBOARD LAYOUT................................................................................... 4
5. SLIDER SWITCH FEATURES........................................................................ 5
6. KEY FEATURES.......................................................................................... 6
7. CALCULATION EXAMPLES..………..............................………........................ 8
8. TECHNICAL SPECIFICATION………………………………………..….………..18
1. OPERATIONS AND MAINTENANCE
Printer Switch – This switch is located on upper left portion of the keyboard. Move the
slide switch over the corresponding function for your application.
OFF - Power OFF the Calculator.
NP - NON PRINT mode, use if only the display is needed.
P - PRINT mode, use if you wish to have the printer operational.

3
CAUTIONS
- The calculator must not be covered when turned on. This will cause the unit to
overheat.
- Do not use organic solutions such as alcohol to clean the housing.
- Do not use or leave the calculator in direct sun light. Areas subject to quick
temperature changes, high humidity and dirt should be avoided.
2. THERMAL PRINTER
The Victor 1310 Big Print Calculator features a thermal printer. There is no need to ever
change an ink roller or ribbon. The thermal printer can print at a speed of 6 lines per
second, while making a minimal amount of noise to keep the office environment quiet.
PLEASE BE SURE TO USE ONLY THERMAL PAPER
3. LOADING PAPER
1. Plug in calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight, even edge for proper
feeding through the printer head.
3. While holding the paper roll in one hand, feed the paper from the bottom of the roll
and insert into the paper slot at the back of the calculator.
4. Depress paper feed key until the paper catches and advances through the printer.
5. Place the paper roll on the paper holder.

4
4. KEYBOARD LAYOUT
1. Off / NP / P Switch 12. Tax 1 23. Subtraction
2. Rounding Selector 13. Tax 2 24. Addition
3. Decimal Selector 14. Back Space 25. Time / Date Display
4. 10 / 12 Digit Selector 15. Percentage 26. Item Count
5. Grand Total Switch 16. Grand Total 27. Subtotal / Date
6. Paper Feed 17. Clear Entry / Clear 28. Total
7. Delta Percentage 18. Division 29. Memory Total
8. Cost 19. Equal 30. Memory Subtotal
9. Sell 20. Multiplication 31. Memory Subtraction
10. Margin 21. Sign Change 32. Memory Addition
11. Tax Rate Preset 22. Numeric Key Pad

5. SLIDER SWITCH FEATURES
1. OFF NP P Printer Selects Switch
OFF The calculator is turned OFF.
NP (Non-print) Printer is activated only when feed key or non-add/date key is
pressed.
PRINT Printer is activated.
2. ↓5/4 ↑Rounding Switch
↓All calculations will be rounded down.
5/4 Final result is rounded up if the 1st digit not to be printed is 5 or more
and rounded down if the 1st digit not to be printed is 4 or less.
↑All calculations will be rounded up.
3. A 0 2 3 4 F Decimal Point Selector
AMonetary Add Mode: At this setting, amounts entered are assumed to be
monetary. The calculator automatically supplies a decimal point to the left
of the last two digits entered. Use this setting to add, subtract, multiply,
and divide decimals.
0,2,3,4 Fixed Decimal Point Mode: These settings specify the number of digits to
the right of the decimal point that are shown in the result.
FFloating Decimal Point Mode: This setting specifies that all digits of the
result are shown, up to a maximum of 10 in the 10 Digit Big Print mode,
and 12 in the 12 Digit Regular Print mode. If the result exceeds these
capacities, excess digits to the right of the decimal point are dropped. No
rounding takes place.
4. 10 / 12 Digit Selector
10 Sets the calculator to 10 Digit Mode with larger print.
12 Sets the calculator to 12 Digit Mode with normal size print.
5. Grand Total Switch
•Calculation without Grand Total
GT Any total taken with Tkey is automatically accumulated to Grand Total.
The accumulated grand total can be recalled by pressing GT key.

6
6. KEY FEATURES
6. [↑] Paper feed key
Advance the paper roll.
7. [Δ%] Delta Percentage
Automatically compares any two amounts and then calculates and prints the
difference between the two numbers and the percentage difference.
8. [COST] Cost key
Enter the desired Cost amount and depress the Cost key.
9. [SELL] Sell key
Enter the desired Sell amount and depress the Sell key.
10. [MARGIN] Profit margin
Use to enter the desired profit margin.
11. [RATE] TAX rate preset key
Use to enter the desired TAX rate. To set the TAX rate, press and hold the RATE
key for three seconds until RATE flashes on the display. Enter the desired TAX
rate and press either TAX 1 or TAX 2. You may have two separate TAX rates
stored.
12. [TAX 1] Tax 1 key
Calculate the amount of Tax with tax rate preset by RATE key. Use +key for
calculating an amount including the Tax, and –key for calculating an amount
excluding the Tax.
13. [TAX 2] Tax 2 key
Calculate the amount Tax with tax rate preset by RATE key. Use +key for
calculating an amount including Tax, and –key for calculating an amount
excluding Tax.
14. [→] Right shift key
Deletes right most character of a live entry
15. [%+] Percent key
Use to complete a percentage calculation using the multiplication or division
functions
16. [GT] Grand Total key
Print and clear the Grand Total Accumulator.
17. [CE/C] Clear Entry / Clear key
Press this key once to clear a live entry. Press twice to clear the accumulator or

7
pending calculation. This function does not clear the Memory or Grand total.
18. [÷] Division key
To divide, enter the number to be divided (dividend) then depress the Divide key.
Then enter the second number (divisor) and depress Equals or other keys as
necessary to obtain a result. If the key is depressed repeatedly, it will make
sequential division calculations.
19. [=] Equal key
Press to get the answer of a multiplication or division calculation.
20. [X] Multiplication key
To multiply, enter the first number (multiplicand) and depress the Times key. Then
enter the second number (multiplier) and depress Equals or other keys as
necessary to obtain a result. If the key is depressed repeatedly, it will make
sequential multiple calculations.
21. [+/-] Sign change key
Reverse the sign on the display.
22. [0]-[9], [00] & [•] Numeric keys.
Any numeral over 12 digits (10 Digits in Big Print mode) will be ineffective. If the
decimal point key is used more than once in one numeral, the first decimal point
will be considered as effective.
23. [−] Minus key
Subtracts the amount entered from the accumulator. To subtract the same amount
more than one time (repeat subtraction), enter that amount once and depress the
Minus key as many times as necessary. If this key is depressed immediately after
[%] key, it works as percent minus key.
24. [+] Plus key
Adds the amount entered to the accumulator. To add the same amount more than
one time (repeat addition), enter that amount once and depress the Plus key as
many times as necessary. If this key is depressed immediately after [%] key, it
works as percent plus key.
25. [TIME/DATE] Time and Date display key
Used to display or program the date and time. Depressing this key once will cause
the date to display and print on the tape. A second depression will display and
print the time. Holding the key down for three seconds will cause the date or time
to flash, this is the program mode.
26. [N] Item Count key
Depressing the N key will display the current Item Count. If pressed once after the
pressing the T key, the calculator will display the Item Count, immediately pressing
the N key a second time will provide the average of the numbers added or
subtracted.
27. [# / S] Date / Subtotal key
#: The calculator will print live entry as an identifier such as an invoice number

8
with “#” mark.
S: The calculator prints but does not clear the accumulator.
28. [T] Total key
Prints and clears the accumulator. When this key is pressed with the switch in the
“GT” position, the result is accumulated automatically in the grand total memory.
29. [MT] Memory Total key
Prints the memory total and clears the memory. (Separate from the GT Memory)
30. [MS] Memory Subtotal key
Prints but does not clear the memory.
31. [M-] Memory Minus key
Subtracts the amount entered from memory. If there is a live calculation pending,
the Memory minus key will complete the calculation and subtract the amount from
Memory.
32. [M+] Memory Plus key
Adds the amount entered into memory. If there is a live calculation pending, the
Memory plus key will complete the calculation and accumulate the result to
Memory.
7. CALCULATION EXAMPLES
1. ADDITION / SUBTRACTION
Print Rounding Decimal Digits GT
P 5/4 F 12 .
Calculation Enter Display Paper
2 + 3.1415926 - 6 = ? 2 [+] 2.
3.1415926 [+] 5.1415926
6 [−] - 0.8584074
[T] - 0.8584074
2. ADDITION / SUBTRACTION IN ADD MODE
Print Rounding Decimal Digits GT
P 5/4 A 12 .
2. +
3.1415926 +
6. −
−0.8584074 Τ

9
Calculation Enter Display Paper
1.23 −4.56 + 7.89 = ? 123 [+] 1.23
456 [−] - 3.33
[#/S] - 3.33
789 [+] 4.56
[T] 4.56
3. ITEM COUNT PRESETTING
Print Rounding Decimal Digits GT
P 5/4 A 12 .
Calculation Enter Display Paper
[CE/C] 0.
Setting Item (Press & Hold 3 sec) [N] (Blinking) 0000.
Count Plus [+]
0000.
[CE/C] 0.
Setting Item (Press & Hold 3 sec) [N] (Blinking) 0000.
Count Plus Minus [-] 0000.
4. ADDITION / SUBTRACTION WITH ITEM COUNT
Print Rounding Decimal Digits GT
P 5/4 A 12 .
Calculation Enter Display Paper
11.32 + 7.98 −33.33 = ? 1132 [+] 11.32
798 [+] 19.30
[N] 0002.
1.23 +
4.56 −
- 3.33 S
7.89 +
4.56 Τ
11.32 +
7.98 +
002
19.30 S
33.33 –
001
- 14.03 Τ
0C
0. C
000
0. C
000

10
[#/S] 19.30
3333 [−] - 14.03
[N] 0001.
[T] - 14.03
[CE/C] 0.
5. GRAND TOTAL MEMORY Print Rounding Decimal Digits GT
P 5/4 F 12 GT
Calculation Enter Display Paper
13.20 9.55 [CE/C] 0.
8.30 7.36 13.2 [+] 13.20
+ 2.95 18.33 8.3 [+] 21.50
24.45 +35.24 =T? 2.95 [+] 24.45
[T] .24.45
9.55 [+] .9.55
7.36 [+] .16.91
18.33 [+] .35.24
[T] .35.24
[GT] 59.69
6. REPETATIVE CALCULATION WITH REFERENCE TO DATE
Print Rounding Decimal Digits GT
P 5/4 A 12 .
Calculation Enter Display Paper
6.54 + 6.54 + 6.54 −21.09.2001 [#/S] 21.092001
7.89 −7.89 = ? 654 [+] 6.54
[+] 13.08
[+] 19.62
789 [−] 11.73
0. C
13.20 +
8.30 +
2.95 +
24.45 Τ+
9.55 +
7.36 +
18.33 +
35.24 Τ+
59.69 GΤ
# 21 09 2001
6.54 +
6.54 +
6.54 +
7.89 −
7.89 −
3.84 Τ

11
[−] 3.84
[T] 3.84
7. ROUNDING FOR ADDITION / SUBTRACTION
Print Rounding Decimal Digits GT
P ↓0 12 .
Calculation Enter Display Paper
3.4 + 2.1 = ? 3.4 [+] 3.4
2.1 [+] 5.5
[T] 5.
Print Rounding Decimal Digits GT
P 5/4 0 12 .
Calculation Enter Display Paper
3.4 + 2.1 = ? 3.4 [+] 3.4
2.1 [+] 5.5
[T] 6.
8. RIGHT SHIFT
Print Rounding Decimal Digits GT
P 5/4 4 12 .
Calculation Enter Display Paper
5.4321 + 2.34567 = ? 5.4321 [+] 5.4321
2.3457 [→] 2.345
67 [+] 7.77777
[T] 7.7778
3.4 +
2.1 +
5. Τ
3.4 +
2.1 +
6. Τ
5.4321 +
2.34567 +
7.7788 Τ

12
9. CONSTANT MULTIPLICATION
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation Enter Display Paper
2 ×4 = 8 2 [×] 2.00
2 ×5 = 10 4 [=] 8.00
2 ×6 = 12
5 [=] 10.00
6 [=] 12.00
10. CONSTANT DIVISION
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation
Enter Display Paper
755 ÷4 = 188.75 755 [÷] 755.00
409 ÷4 = 102.25 4 [=] 188.75
32 ÷4 = 8.00
409 [=] 102.25
32[=] 8.00
2.00 ×
4.00 =
8.00 ∗
5.00 =
10.00 ∗
6.00 =
12.00 ∗
755.00 ÷
4.00 =
188.75 ∗
409.00
=
102.25 ∗
32.00 =
8.00 ∗

13
11. DISCOUNT CALCULATION
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation Enter Display Paper
Price = $169.50 169.5 [×] 169.50
Discount = 14% 14 [%+] 23.73
Total Discount = $23.70
Net = $145.77 [-] 145.77
12. DELTA PERCENTAGE CALCULATION
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation Enter Display Paper
175,000−125,000 125000 [Δ%]125,000.00
= 50,000 175000 [=] 40.00
50,000 ÷125,000
x 100 = 40%
13. PROFIT MARGIN
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation Enter Display Paper
Cost = 100 100 [COST] 100.00
Margin = 5% 5 [MARGIN] 105.26
Sell = ?
Sell = 150.00 150 [SELL] 150.00
Margin = 10% 010 [MARGIN] 135.00
Cost = ?
169.50 ×
14.00 %
23.73 ∗
145.77 -%
125,000.00 Δ
175,000.00 =
50,000.00 Δ∗
40.00 Δ%
100.00 C
5.00 M*
5.26 ∆∗
105.26 S*
150.00 S
10.00 M%
15.00 Δ∗
135.00 C*

14
14. MEMORY CALCULATION
Print Rounding Decimal Digits GT
P 5/4 F 12 .
Calculation Enter Display Paper
[CE/C] 0.
100 + 200 = ? 100 [+] 100.
900 - 500 = ? 200 [+] 300.
20 X 7 = ? [T] 300.
12 X 5 = ?
Total ? [M+] M 300.
900 [+] M 900.
500 [-] M 400.
[T] M 400.
[M+] M 400.
20 [X] M 20.
7 [=] M 140.
[M+] M 140.
12 [X] M 12.
5 [M+] M 60.
[MS] M 900.
[MT] 900.
15. TAX RATE PRESETTING
Print Rounding Decimal Digits GT
P 5/4 2 12 .
Calculation Enter Display Paper
[CE/C] 0.
Preset TAX 1 = 7.5% (Press & Hold 3 sec) [RATE] (Blinking) 0.
7.5 [TAX 1] 7.5
[CE/C] 0.
Preset TAX 2 = 18.6%(Press & Hold 3 sec) [RATE] (Blinking) 0.
18.6 [TAX 2] 18.6
0. C
7.50 T1%
0. C
18.60 T2%
0. C
100. +
200. +
300. Τ
300. M+
900. +
500. -
400. Τ
400. M+
20. x
7. =
140. ∗
140. M+
12. x
5. =
60. M+
900. MS
900. MΤ

15
16. TAX CALCULATION
Print Rounding Decimal Digits GT
P ↑2 12 .
Calculation Enter Display Paper
Price without Tax 1 [CE/C] 0.
=261.56 261.56 [TAX 1] 261.56
Price with Tax 1 = ? [+] 281.18
Price without Tax 1 [TAX 1] 281.18
[-] 261.56
0. C
261.56
7.50 T1%
19.62 Δ
281.18 Τ1+
281.18
7.50 T1%
19.62 Δ
261.56 Τ1−
0. C
300.00
18.60 T2%
55 80
Δ

16
Price without Tax 2 [CE/C] 0.
=300 300 [TAX 2] 300.00
Price with Tax 2 = ? [+] 355.80
Price without Tax 2 [TAX 2] 355.80
[-] 300.00
Amount including TAX 1 and TAX 2:
200 [TAX 1] 200.00
[TAX 2] 200.00
[+] 252.20
NOTE: TAX calculations are fixed at 2 decimal positions and result
will be rounded up if there is a carry over in the third decimal
position.
17. DATE AND TIME DISPLAY PRESETTING
Print Rounding Decimal Digits GT
P 5/4 F 12 .
Calculation Enter Display Paper
[CE/C] 0.
Set Time to [TIME/DATE] MM-DD-YYYY
4:37 PM (Press & Hold 3 sec)[TIME/DATE] (Blinking)HH-MM-SS
1637 (Blinking)1637
[TIME/DATE] P 04-37-00
[# / S] P 04-37-00
Set Date to [CE/C] 0.
September 14, 2000 (Press & Hold 3 sec)[TIME/DATE] (Blinking)MM-DD-YYYY
091400 (Blinking) 91400
0. C
# 04 37
# 9 14 2000
200.00
7.50 T1%
15.00 Δ
18.60 T2%
37.20 Δ
52.20 Δ
252.20 ∗

17
[TIME/DATE] 09-14-2000
[# / S] 09-14-2000

18
9. TECHNICAL SPECIFICATIONS
Type: Desktop Adding Machine/Calculator, Electronic Print/VFD
Basic Operations: Addition/subtraction and multiplication/division
Capacity: Input and result 12 digits (10 digits in 10 Digit mode)
Decimal System: Add mode(A), Floating(F), Fixed(0,2,3,4)
Functions: 4 rules, successive calculation, memory calculation, grand total
memory, constant calculation, tax calculation, cost, sell and
margin calculation.
Printer: Thermal Printer
Paper width: Width 57.5 ± 0.5mm X Diameter 30mm
THERMAL PAPER ONLY
Display: 12 digit LCD display (10 Digit in Big Print mode)
Operating Temp: 0°C ~ 40°C
Dimensions: 198mm (W) x 250mm (D) x 57mm (H)
Weight: 3.1 lbs.
WARRANTY
Your new VICTOR electronic calculator is guaranteed to the original purchaser for three years
for all parts and labor, providing repair work is performed at an authorized VICTOR Service
Center and the units are sent by prepaid mail. For Service Centers outside the USA please
consult your local office supply Dealer or Victor’s Web Site. Warranty repair requires a copy of
the original purchase invoice or receipt to be packed with the machine.
Any warranty, statutory or otherwise, dose not include service and or replacement or repair of
parts when damage or defect is a result of accident, abuse, or the elements.
Victor Technology
175 E. Crossroads Pkwy.
Bolingbrook, IL 60440 USA
(630)754 - 4400 (Phone)
(630)972 - 3902 (Fax)
http://www.victortech.com

19
VICTOR
BIG PRINT™
CALCULATRICE IMPRIMANTE À USAGE INTENSIF À 10 / 12 CHIFFRES
MANUAL DE INSTRUCCIONES

20
BIG PRINT™ CARACTÉRISTIQUE
La calculatrice Victor 1310 Big Print offre deux modes de fonctionnement. Utilisez
l'interrupteur à glissière 10 / 12 pour choisir le mode de fonctionnement. Si l’interrupteur est
placé au-dessus du 10, la calculatrice fonctionnera comme une calculatrice à 10 chiffres et
à gros caractères. Si l’interrupteur est placé au-dessus du 12, la calculatrice fonctionnera
comme une calculatrice à 12 chiffres et à caractères normaux.
TABLE DES MATIÈRES
1.ENTRETIEN GÉNÉRAL............................................................ 3
2. IMPRIMANTE THERMIQUE…………………………………………………………3
3. ALIMENTATION DU PAPIER.............................................................................. 3
4. GRAPHIQUES DU CLAVIER............................................................................... 4
5. COMMUTATEURS DE MODE........................................................................ 5
6. CARACTÉRISTIQUES PRINCIPALES................................................................ 6
7. EXEMPLES DE CALCUL..………..............................………........................ 8
9. SPÉCIFICATIONS TECHNIQUES……………………………………..….………..18
1. ENTRETIEN GÉNÉRAL
Commutateur d’imprimeur – Ce commutateur est situé sur la partie supérieure du clavier.
Glissez le commutateur selon votre application.
OFF - Puissance OUTRE de la calculatrice.
NP - Si seulement l’affichage est nécessaire.
P - Si vous souhaitez avoir l’imprimeur à être opérationnel.