Victory Land Group BH10-084-902-13 User manual

ASSEMBLY INSTRUCTIONS
Black or White Classic Country Chair
Item Number Black Chair: BH10-084-902-13
Item Number White Chair: BH10-084-902-14
CUSTOMER SERVICE INFORMATION
If parts are missing, DO NOT return to the store. To order missing or replacement parts, please
call 1-800-933-0527.
PHONE: [phone]
FAX: [phone]
8:30 am to 5:00 pm CST, Mon. thru Fri.
EMAIL: [e-mail]
Victory Land Group, Inc
1350 Munger Rd
Bartlett, IL 60103
WEB:http://www.victorylandgroup.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Purchase Date: ____________________________ Lot Number: ____________________________
Please save and attach your sales receipt to thisAssembly Instruction Booklet.

1. Chair-maximum load weight is 300 pounds per chair.
MAXIMUM RECOMMENDED WEIGHT LOADS
The manufacturer warrants to the original consumer-purchaser that this product shall be free
from defects in workmanship and materials under normal and reasonable use when assembled and
operated according to this Instruction Manual from date of purchase as follows:
LIMITED
W
ARRANTY
One Year
The manufacturer will, at its option, refinish or replace any product or part found to be defective during
the limited warranty period. There may be a shipping charge. The manufacturer may require you to
return the part(s) claimed to be defective for its inspection, freight or postage prepaid.
Contact our Customer Support Center as shown above before returning any part(s).
The manufacturer will require reasonable proof of purchase. We strongly recommend you keep
your sales receipt.
You can attach your receipt to this manual.
This limited warranty does not cover the cost of any inconvenience or property damage due to failure of
the product and does not cover damage due to misuse, abuse, alteration, improper or failure to perform
normal and routine maintenance, discoloration, scratches, rust, accident, damage arising out of
transportation of the product, or normal wear and tear.
This limited warranty will not apply to any Black or White Classic Country Chair for commercial use.
This limited warranty is the sole warranty given by the manufacturer and is in lieu of all other warranties;
express or implied, including implied warranty of merchantability or fitness for a particular purpose.
Neither manufacturer dealers nor the retail establishment selling this product have any authority to make
any warranties or to promise remedies in addition to or inconsistent with those stated above.
This limited warranty applies only to products sold at retail, and is not transferable.
The manufacturer's maximum liability, in any event, shall not exceed the purchase price of the product
paid by the original consumer-purchaser.
Some states do not allow the exclusion or limitation of incidental or consequential damages.
Therefore, the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and may also have other rights, which vary from state to state.
1

2
1. Please read the Assembly Instructions prior to assembling this product.
GENERAL INFORMATION
,
TIPS
,
& TRICKS
2. To avoid damage, assemble the product on a non-abrasive surface such as carpet.
3. Make sure all screws, nuts, and bolts are tightly fastened before the product is used.
4. Not for Commercial Use
5. Keep all 4 legs of the chairs on the ground when using them. Do not rock or tip back in
the chairs.
6. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the wood as needed.
Avoid prolonged exposure to moisture and sunlight.
7. Estimated assembly time is fifteen minutes when one person is assembling.
Please make sure you have all parts before beginning assembly. Please wait until all steps are
completed before tightening bolts and nuts.
A Phillips head screwdriver is necessary for assembly. It’s not included in
hardware list.

E. Chair Back F. Front Legs
QTY: 1 pc QTY: 2 pcs
G. Seat Frame H. Chair Seat
QTY: 1 pc QTY: 1 pc
CHAIR PART LIST
3

1. Nut 2. Spring Washer 3. Flat Washer
5/16 inch Dia 5/16 inch Dia 5/16 inch Dia
QTY: 4 pcs QTY: 11 pcs QTY: 11 pcs
9. Long Bolt 11. Wood Screw
1/4 Dia x 3 inch L
QTY: 4 pcs QTY: 3 pcs
10. Short Bolt
1/4 Dia x 1-3/4 inch L
QTY: 3 pcs
6. Open-End Wrench
QTY: 1 pc
CHAIR HARDWARE LIST
4

REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
1 Nut 4 pcs
2 Spring Washe
r
4 pcs
3 Flat Washer
4 pcs
6 Open-End Wrench 1 pc
5
1. Remove the plastic plugs protecting the bolts from the
front legs (F). Attach two front legs (F) to seat frame (G)
using nuts (1), spring washers (2) and flat washers (3).
Don’t tighten the nuts at this time.
Note: The chair seat frame (G) has one screw hole in each
side and one in the front to attach the chair seat at a later
step. These holes are wider on the bottom and narrower
on the top. Ensure the wider holes look down towards
the bottom of the chair legs (F).
6
1
2
3
2
3
1
G
F
PLASTIC PLUG
F
F
Ensure wider end of
holes face towards
the bottom of the
char legs
ba
ASSEMBLY INSTRUCTIONS-CHAIR
G

ASSEMBLY INSTRUCTIONS-CHAIR
6
REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
2 Spring Washer 7 pcs
3 Flat Washer
7 pcs
6 Open-End Wrench
1 pc
9 Long Bolt
4 pcs
10 Short Blot
3 pcs
10
2
3
9
2
3
9
2
3
6
6
10
2
3G
E ba 10
2
3
G
2. Attach the seat frame (G) to the chair back (E) using long
bolts (9), short bolts (10), spring washers (2) and flat
washers (3) as instructions (a&b).
3. Turn the chair upright. Tightly fasten all bolts and nuts
ensuring the chair remains level.
E

REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
11 Wood Screw 3 pcs
ASSEMBLY INSTRUCTIONS-CHAIR
11
G
a
G
H
E
4. Place chair seat (H) upside down on a non-abrasive table surface. The rear (tapered
end) of the chair seat (H) should be near the table edge.
Hint: Protect the non-abrasive table surface and chair seat (H) by laying a towel
in-between the chair seat and table.
5. Place the assembled chair frame on the chair seat (H) as shown. Attach with wood
screws (11).
7

ASSEMBLY INSTRUCTIONS-CHAIR
Maximum
Recommended
Weight Load
300 pounds ( 136,08 kg )
6. The Classic Country Chair is now ready for use.
Printed in Vietnam
8