Victory Land Group BH11-084-002-15 User manual

ASSEMBLY INSTRUCTIONS
3PC Pub Set
Item Number: BH11-084-002-15(Black/Brown)
Item Number: BH11-084-002-16(White/Natural)
BH11-084-002-15 BH11-084-002-16
CUSTOMER SERVICE INFORMATION
If parts are missing, DO NOT return to the store. To order missing or replacement
parts, please call 1-800-933-0527. All parts except for the tabletop are replaceable.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION.PLEASE READ AND KEEP FOR FUTURE REFERENCE.
PHONE: [phone]
FAX: [phone]
8:30 am to 5:00 pm CST, Mon. thru Fri.
EMAIL: [e-mail]
Victory Land Group, Inc
1350 Munger Rd
Bartlett, IL 60103
WEB:http://www.victorylandgroup.com
Purchase Date: ____________________________ Lot Number: ____________________________
Please save and attach your sales receipt to thisAssembly Instruction Booklet.

1. Stool-maximum load weight per chair is 300 pounds ( 136.08 kg ).
2. Table-maximum load weight on table top is 350 pounds ( 158.76 kg ).
1. Please read the Assembly Instructions prior to assembling this product.
2. To avoid damage, assemble the product on a non-abrasive surface such as carpet.
3. Make sure all screws, nuts, and bolts are tightly fastened before the product is used.
4. Not for Commercial Use.
5. Care: Use a soft clean cloth that will not scratch the surface when dusting. Use of
furniture polish is not necessary. Should you choose to use polishes, test in an
inconspicuous area first. Use of solvents of any kind may damage your furniture’s
finish. Never use water to clean your furniture as it may cause damage to the finish.
6. Estimated assembly time is two and a half hours when 2 people are assembling.
- -
1
GENERAL INFORMATION
,
TIPS & TRICKS
Please make sure you have all parts before beginning assembly. Please wait until all
steps are completed before tightening bolts. We recommend using two people for
assembly.
MAXIMUM RECOMMENDED WEIGHT LOADS
1. Use the long end of the Allen wrench to fasten Allen bolts loosely and quickly.
2. Use the short end of the Allen wrench for final tightening.
12
A Phillips screwdriver is necessary for assembly. It’s not included in
hardware list.

A.Tabletop (Not Replacement) B. Leg Frame
QTY: 1 pc QTY: 4 pcs
1. LargeAllen Bolt 2. Large Spring Washer 3. Large Flat Washer
5/16 inch Dia x 2-3/8 inch L 5/16 inch Dia 5/16 inch Dia
QTY: 8 pcs QTY: 8 pcs QTY: 8 pcs
4. Large Allen Wrench
QTY: 1 pc
HARDWARE LIST - TABLE
PARTS LIST - TABLE
- -
2

REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
1 Large Allen Bolt 8 pcs
2 Large Spring Washer 8 pcs
3 Large Flat Washer
8 pcs
4 Large Allen Wrench
1 pc
ASSEMBLY INSTRUCTIONS - TABLE
B
A
4
1
1
2
3
2
3
B
B
B
B
A
1. Place the tabletop (A) upside down on a non-abrasive surface such as carpet.
2. Attach four legs (B) to tabletop (A) using large Allen bolts (1), large spring washers (2) and large
flat washers (3) as shown. Tighten the bolts with large Allen wrench (4)
- -
3

ASSEMBLY INSTRUCTIONS - TABLE
- -
4
Maximum
Recommended
Weight Load
350 pounds (158.76 kg )
3. Turn the table upright. The Table is now ready to use.

C. Seat D. Seat Frame E. Leg
QTY: 2 pcs QTY: 2 pcs QTY: 8 pcs
F. Crossbar
QTY: 8 pcs
5. Small Allen Bolt 6. Small Spring Washer 7. Small Flat Washer
1/4 inch Dia x 2 inch L 1/4 inch Dia 1/4 inch Dia
QTY: 16 pcs QTY: 16 pcs QTY: 16 pcs
8. Small Allen Wrench 9. Screw
1-1/2 inch L
QTY: 1 pc QTY: 24 pcs
HARDWARE LIST - STOOL
PARTS LIST -STOOL
- -
5

ASSEMBLY INSTRUCTIONS
- CHAIR
REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
5 Small Allen Bolt 8 pcs
6 Small Spring
Washer 8 pcs
7 Small Flat Washer 8 pcs
8 Small Allen Wrench 1 pc
- -
6
D
E 8
5
5
6
7
E
F
F
6
7
E
E
E
E
D
F
F
F
Ensure wider end of
holes face towards
the bottom of the legs
F
1. Attach four legs (E) to the seat frame (D) using eight small Allen bolts (5), eight small spring
washers (6) and eight small flat washers (7) as shown. Do not tighten the bolts at this time.
2. Attached four crossbars (F) to the legs (E) by inserting the crossbars (F) end into the holes on the legs
(E) as shown.
3. Tighten all bolts with a small Allen wrench (8).

REQUIRED HARDWARE IN THIS STEP
NO.DESCRIPTION SKETCH QTY
9 Screw 12 pcs
ASSEMBLY INSTRUCTIONS - CHAIR
- -
7
E
F
9
C
D
9
F
F
F
E
E
C
D
E
E
F
4. Place the seat (C) upside down on a non-abrasive surface such as carpet. Attach the assembled to the
seat (C) by screwing four screws (9) as shown.
5. Secure the crossbars (F) to the legs (E) using eight screws (9) as shown.

ASSEMBLY INSTRUCTIONS - CHAIR
- -
8
Maximum
Recommended
Weight Load
300 pounds ( 136.08 kg )
6. Turn the stool upright. The chair is now ready to use.
Repeat the steps on pages 6 to 8 to assemble the second stool.

All parts and components are warranted by the supplier. Should any parts be missing, defective or
damaged during normal use, we will replace or repair the parts for up to 1 year from the date of
purchase. All parts except for the table top are replaceable. Please call our toll free number at
1-800-933-0527 (CST 8:30-5:00 PM) for more information. You may also contact us through e-mail
at [email protected]. This limited warranty provides coverage to the original purchaser unde
normal household usage. This warranty may give you specific legal rights and you may also have other
rights which vary from State to State.
LIMITED
W
ARRANTY
r
Printing Date:
- -
9