Victory VUR-60-SST User manual

Worktop Refrigerators
Standard Features:
• Stainless Steel Doors, Tops and Interior Bottom Construction
Provides Durable Lasting Finish
• Durable Aluminum Interior Sides and Rear for Easy Cleaning
• Models are Front-Breathing and Recessible to Enable Zero
Clearance Placement or Placement in Limited Access Areas
• Holds Food Safely and Assures Fresher Food
• Interior Thermometer Consistently Monitors Temperature
• Self-Closing Door with Replaceable One Piece Magnetic Gasket
Maintains Positive Seal
• Horizontal Recessed Heavy-Duty Handles Provide Quicker, Easier
Access to Cabinets
• Heavy-Duty, Epoxy Coated Steel Shelves Accept Heavy Loads and
Offer Easy Clean-up
• Adjustable Shelves Provide Storage Flexibility
• Energy Saving, High Density, Polyurethane Foam Insulation
Promotes Cold Retention
• Anti-Corrosion Coated Evaporator Coil Assures Lasting
Performance
• Automatic Condensation Evaporation System Eliminates the
Need for Floor Drain
• Balanced Energy Efficient Refrigeration System
• Environmentally Friendly R-134a Refrigerant
• Plugs into Standard 115 V Outlets - Cord and Plug Attached for
Easy Installation
• 5" Heavy-Duty Swivel Casters with Brakes Provide Mobility
• Completely Finished and Enclosed Cabinet Back
• Meets Tough NSF Standard 7, 41° F
Optional Features and Accessories:
• 3" Heavy-Duty Swivel Casters with Brakes
• 6” Adjustable Stainless Steel Legs
• Single and Double Overshelf
• Stainless Steel Back
• Door Mounted Dial Thermometer
• Cylinder Locks
Two Section Model with Doors
Doors, tops and interior floor of stainless steel.
Aluminum ends and interior.
VUR-60-SST
VUR-660-SSST
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: [phone] I Fax: [phone] I E-mail: [e-mail]
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory
Refrigeration, Inc. Worktop Refrigerators
CHARACTERISTICS VUR-60-SST
Width, Overall 60
Depth, Overall 30
Height, Overall 35
1
/
2
Height, Work Area 35
1
/
2
Capacity Net (cubic feet) 16
No. of Full Doors 2
No. of Shelves 4
Cabinet Voltage 115/60/1
Condensing Unit Voltage 115/60/1
Condensing Unit Size (HP) 1/3
Total Amperes 8.8
Crated dim. & wts. Ht. Width Depth Lbs.
VUR-60-SST 481/2651/2391/2390
Dimensional tolerance ± 1/4” Metric dimensions (MM)
Copyright January 2004
Printed in U.S.A. 010461
PART OF AGA FOODSERVICE GROUP
35.50
(901)
30.00
(762)
2.00
(50)
AIR FLOW
23.94
(608)
14.12
(358)
60.00
(1524)
30.00
(762)
22.91
(581)
22.91
(581)
19.75
(501)
SIDE VIEWFRONT VIEW
TOP VIEW
NOTE: If cabinet is located directly against
wall and/or under low ceiling, a minimum
clearance of 2” is required.
We reserve the right to change
specifications and product design
without notice. Such revisions do not
entitle the buyer to corresponding
changes, improvements, additions or
replacements for previously purchased
equipment.