Victory VPT-46 User manual

Pizza/Salad/Sandwich Refrigerators
Cabinet:
VPT Pizza Tables are constructed of heavy
gauge, polished stainless steel to maintain
an attractive appearance for years to come.
Interiors feature easy to clean ABS molded
plastic providing superior appearance and
durability.
Shelving:
Molded shelf supports hold two epoxy
coated shelves per door section. Pan rail
capacity for 1/3size pans is 6 (VPT-46),
9 (VPT-65) and 12 (VPT-88).
Optional 16 guage heavy duty/high capacity
drawers with the ability to hold four 12” x
20” pans are available. (Pans are not
included.)
Doors:
Self-closing doors stay open at 110°
facilitating loading. Doors feature flush
mount handles, camlift hinges, and magnetic
gaskets.
Refrigeration:
The slide-out refrigeration system makes
service and maintenance easy. The
refrigeration system is self-contained with
expansion valves. The system uses
environmentally friendly R-134a Refrigerant. A
forced air distribution system provides
temperature maintenance in the storage
compartment. The cold-wall pan rail system
keeps condiments evenly cooled. VPTs are
designed to meet the NSF Standard 7, 41°F
holding temperature requirements.
Standard Features
• Energy Saving Night Switch Located on Grill
• Dual Control Separately Cools Each Section
of the Pizza Table
• Food Pans are Recessed and Enveloped in a
Raised Pan Rail System to Assure
Temperature Maintenance
• A Forced Air Distribution System with
Oversized Coil Assures Temperature Integrity
in the Storage Compartment
• Meets Tough NSF Standard 7, 41°F
• Heavy Gauge Stainless Steel Front, Doors
and Ends for Lasting Appearance
• Easy to Clean ABS Interior
• High Density Foamed-in-Place Polyurethane
Insulation
• Interior Thermometer Consistently Monitors
Temperature
• Self-Closing Doors with a 110° Stay Open
Feature for Easy Loading
• Self-Adjusting Magnetic Door Gaskets
• Lifetime Camlift Hinges for Trouble-Free
Performance
• Flush Mount Integrated Handles
• Epoxy Coated Steel Shelves
• Coated Evaporator Coil Resists Corrosion for
Lasting Performance
• Plugs into Standard 115V Outlets
• Electrical Cord and Plug Attached for Easy
Installation
• Heavy-Duty 3” Swivel Casters with Brakes
• Completely Enclosed Cabinet Back
• 18” Reversible Cutting Board
• Stainless Steel Lid is Removable for Easy
Cleaning
• Environmentally Friendly R-134a Refrigerant
• Energy Efficient Slide Out Refrigeration
System
• Accommodates Standard Size Food Pans
(Not Provided)
Optional Features:
• Flour Filter
• Stainless Steel Back
• Drawers
• 16 Guage Heavy Duty/High Capacity Drawer
with Capacity of four (12” x 20”) Pans
• Single or Double Overshelves
• Garnish Racks
• Cylinder locks
VPT MODELS —
One, two and three section models with doors.
Case front, doors and ends of stainless steel.
VPT-46
VPT-65
VPT-88
VPT-65
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: [phone] I Fax: [phone] I E-mail: [e-mail]
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Pizza/Salad/Sandwich Refrigerators
CHARACTERISTICS VPT-46 VPT-65 VPT-88
Width, Overall 46 65 5/16 88 5/16
Depth, Overall* 34 1/234 1/234 1/2
Height, Overall 44 44 44
Capacity Net (cubic feet)** 11.0 19.7 35.5
No. of Full Doors 1 2 4
No. of Shelves 2 4 6
Pan Rail Opening (inch) 12 x 42 12 x 63 (2) 12 x 42
Pan Rail Capacity (
1
/
3
)6 9 12
Cabinet Voltage 115/60/1 115/60/1 115/60/1
Condensing Unit Voltage 115/60/1 115/60/1 115/60/1
Condensing Unit Size (HP) 1/41/31/3 +
Total Amperes 4.7 7.8 9.4
NEMA Receptacle Required 5-15R 5-15R 5-15R
* Add 2” for Rear Stand Off
**Base of Cabinet
Crated dim. & wts. Ht. Width Depth Lbs.
VPT-46 491/244 751/2400
VPT-65 491/244 751/2490
VPT-88 491/244 981/2585
Dimensional tolerance ± 1/4” Metric dimensions (MM)
Copyright June 2009
Printed in U.S.A. 063009
13.25
(336)
18.00 (457)
34.50
(876)
42.00
(1066)
46.00
(1168)
63.00
(1600)
65.31
(1658)
13.25
(336)
18.00 (457)
34.50
(876)
88.31
(2243)
34.50
(876)
18.00
(457)
42.00
(1066)
2.16
(54)
42.00
(1066)
13.25
(336)
6.50
(165)
25.75 (654)
28.00(711)
30.00
(762)
40.00
(1016)
34.50 (876)
18.00
(457)
6.00 (152)
35.50
(901)
44.00
(1117)
4.00 (101)
2.25
(57) 2.00 (50)
STAND OFF
FOR AIR FLOW
VPT-46 TOP VIEW VPT-65 TOP VIEW VPT-88 TOP VIEW
VPT-46, VPT-65, VPT-88 SIDE VIEW
NOTE: If cabinet is located
directly against wall an all
around clearance of 2” is
required.
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for previously
purchased equipment.