VicTsing PC176B-1 User manual

User manual
wireless mouse
model：PC176B-1
Package contents:
1*Wireless mouse
1* Nano receiver
1* User manual
Product features:
Stable wireless transmission
2.4GHz wireless technology can provide a reliable connection and not subject
to any interference in the 360 degree with 15 meters.
Surface Compatible King
Unique “interface” focusing ability, high light ceramic tile, dust glass, enhance
the adaptability of optical sensor
Than ordinary wireless power-saving five times
The industry’s high chip, five times power-saving than ordinary mice the
standby time up to 24 months.
No Code Intelligent Connectivity
Plugging the mini-receiver into computer’s USB port and inserting the battery
into the mouse. The mouse will respond immediately, no need complicated
code, plug and play freely.

Silent button design
The silent micro switch design, produce sounds can be reduced about 95%
than the other mouse, the service life reach more than 3000000 times.
Quick start guide:
①Open the battery case, insert the battery to the case(pay attention the
positive and negative position)
Note: Before you use it, please tear the battery insulating protective film
②Remove the receiver
③Insert the receiver into the computer USB interface
Data parameter
Data transmission: 2 Mbps
Frequency: 2403.8MHz —2479.8MHz
Channel:16
Engine: No light
Distance: 15m
Voltage: 1.5V
Current: 11mA
Mouse key life: 300 millions Above
Size: 113*64*32mm
Weight: 64g
Tracking Performance:
Mouse resolution: 1200DPI
Mouse rate of return: 250Hz
System requirement:
IBM or compatible computer:
Windows: 2000/ME/XP(*64)/Vista/7/8/10
Mac OSX(V10.4 above)
Workable USB port
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE：
This device complies with part 15 ofthe FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

NOTE
：
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement,
it can be used in portable exposure condition without restriction.