Vidao 75VNET4 User manual

USER’S MANUAL
75” 4K ULTRA HD TELEVISION
75VNET4
Ver 1.0
For technical assistance or troubleshooting
please call 1-855-998-4326 or visit www.sibrandssupport.com

Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
-
paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or
Moisture.
shall be placed on the apparatus.
17. The mains plug is used as the disconnect and shall remain readily operable.
18. This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may
become damaged.
Safety:
TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED
SERVICE TECHNICIAN ONLY.
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s
Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying the
appliance.
to constitute a risk of electric shock to the users.
75VNET4-1

Safety Instructions
Please read these instructions carefully.
This product complies with all applicable US federal safety requirements, as well as those of the Canadian
Standards Association.
1. Cleaning
Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to
clean.
2. Water and Moisture
Do not use this TV near water. Avoid using this TV in an excessively damp environment.
3. Stand
This TV should always be placed on a solid, sturdy surface.
4. Ventilation
To prevent overheating, do not block or obstruct the vent openings on the TV’s back panel. Also, avoid placing this
TV in a confined area with poor air flow.
5. Power Sources
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
The type of power supply to your home, consult your electronics retailer or local power company.
6. Power Cord Polarization
This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this
plug will only t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician
to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
7. Power Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the TV.
8. Lightning
To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning
and power-line surges.
75VNET4-2

Safety Instructions
9. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electri-
cal Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten-
na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Example of Grounding According to National
Electrical Code Instructions
NEC - National Electrical Code
10. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
11. Overloading
12. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out
TV.
13. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
14. Damage Requiring Service
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will
e. If the TV has been dropped or the cabinet has been damaged.
f. If the TV exhibits a distinct change in performance.
Ground Clamp Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Electric Service
Equipment
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
75VNET4-3

Safety Instructions
15. Replacement Parts
16. Safety Check
Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine
whether the product is in proper operating condition.
17. Wall Mounting
The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child
or adult, and serious damage to the product. Warranty shall be voided.
18. Heat
The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric
should be connected to the grounding system of the building, as close to the point of the cable entry as practical.
This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and television.
- Connect the equipment into an outlet on a circuit different from that to which the television is connected.
- Consult your dealer or an experienced radio / TV technician for assistance.
authority to operate the equipment.
guarantee that interference will not occur in a particular installation. If this television does cause interference to other
When replacement parts are required, be sure that only an authorized service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards and void any warranty.
(including amplifiers) that produce heat.
Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground
Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the
furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
• This equipment is a Class II or double insulated electrical appliance. It has been designed in
such a way that it does not require a safety connection to electrical earth.
75VNET4-4

Table of Contents
Important Safety Instructions .........................................................................................................................................1
Table of Contents ..........................................................................................................................................................5
Introduction ....................................................................................................................................................................6
Installing the Base .........................................................................................................................................................7
Remote Control
Battery Install .................................................................................................................................................................8
Overview .......................................................................................................................................................................9
TV Overview
Front Panel ................................................................................................................................................................. 10
Rear Panel .....................................................................
...............................................................................................................................12
............................................................................................ 11
Connecting External Devices
.......................................................................................................................................13
Customizing TV Settings
...........................................................................................................................................................29
Troubleshooting .......................................................................................................................................................30
75VNET4-5

Introduction What’s In The Box
The package includes the following items. Save the carton & packing for future shipping
• Remote Control
• AAA Batteries (2)
• Quick Start Guide
• User Manual
• Child Safety
• Pedestal Base
teg lliw koob noitcurtsni sihT .snoitcnuf dna serutaef tuoba snoitseuq evah uoy revenehw ediug siht ot refer esaelP
you up and running with the best possible connection type for your devices. Enjoy!
This TV uses a 600x300 VESA mounting bracket attachment pattern. Please take this information with you when
purchasing a wall mount for this TV.
Wall Mount Information
• Sc
USER’S MAN UAL
75” 4K ULT RA HD TEL EVISION
75VNET4K
Ver1.0
For technical assistance or troubleshooting
please call 1-855-998-4326 or visit www.sibrandssupport.com
75VNET4-6
rews M5X10 for Pedestal Base (4)

Place the TV face down
on a soft cloth or cushion.
Position base as shown.
through the holes in the back
of the base into the post holes
and tighten securely.
Do not over-tighten.
Installing the Base
1
75VNET4-7
Insert 4 screws M5X10 (provided)

Battery Install
Remote Control
• Effective remote range is approximately 16 feet at an
angle of no greater than 30° to the left / right or 20° up /
down to the IR sensor.
• To avoid possible damage from battery chemical
leakage, remove the batteries if you do not plan to use
the remote for an extended period of time. Do not mix
batteries of different age and / or type. Always discard
used batteries safely.
• Do not expose the remote control to liquids, direct sun-
light or sources of excessive heat.
• The IR receiver on the TV will not work properly if the set
is in direct sunlight.
NOTE: Improper use of batteries can result in a chemical
leakage or explosion.
• Turn the remote over and remove
battery cover.
• Place two (2) “AAA” batteries into
the battery compartment with the “+”
and “-“ ends facing as indicated.
• Replace the cover
30 30
IR Receiver
75VNET4-8

Remote Control Overview
Switch the TV between On and Standby
mode.
Mute and restore TV sound.
Select a program.(ATV/DTV mode)
Enter multiple program channel number
such as 2-1.
Return to the previous viewing
channel.
Press to select the desired APP.
Display the main menu.
Select among the different input
signal sources:TV/AV/COMPONENT/HDMI1/
HDMI2/HDMI3/VGA/USB.
Allows you to navigate the on
screen display menus and adjust the system
settings to your preference.
the selection.
Return to previous menu.
Exit the on screen display menu.
Select the aspect ratio.
settings:standard/wide/wide zoom/zoom/Just Scan
(HDMI)/Dot by Dot(VGA).
Adjust the volume.
Select the channel.
Into the TV channel.
Start playback or pause.
Reverse playback rapidly.
Advance playback rapidly.
Skip to the beginning of the previous
chapter/track/photo.
Skip to the beginning of the next chapter/
track/photo.
Freeze the picture.
Stop the playback.
Add or delete Favorite channels.
Display the favorite channel list.
Display the present screen information
such as the current channel and input source.
Switch among different audio
channels:STEREO/MONO/SAP.
Closed Caption selection:ON/OFF/CC On
Mute.
Set up parental control.
Select picture mode:dynamic/movie/
user/standard.
Select sound mode:standard/music/
movie/user.
Display program list.
TV
75VNET4-9

TV Overview
4. MENU - Press the button to display. Press to select from the 6 menu options available.
Press the buttons to select a feature from the selected menu then press the buttons
to adjust the volume settings.
2.
)+ HC -( lennahC eht sserP - buttons to select a channel in the TV mode.
3.
Volume (+VOL-) - Press the buttons to adjust the volume up or down.
Front & Rear Panel
1. POWER - Press the button to turn the TV ON/ OFF (power). The screen image will
appear within a few seconds, and the LED will turn on.
5. INPUT - After connecting your DVD, cable box, etc. select the appropriate input source to view. Press the
button to display the input options. Press the buttons to highlight the input source and
press the button to select.
A
IR Receiver
soft light illuminates when the
television power is on.
75VNET4-10

NOTE: You must remove the
pedestal before wall mounting.
TV Overview Rear Panel
Wall Mounting
It is recommended that you
consult a professional before
mounting this TV a wall.
Use VESA 600x300 wall
mount hardware.
7. CABLE-ANTENNA - Connect an antenna or cable connection for television reception.
Note: Use an outdoor antenna, cable or satellite for best reception.
2. USB Input Port
supports MP3 and JPEG).
1. OPTICAL OUT - Connect to an AV Receiver for high quality digital audio.
8. EARPHONE - Connect a stereo headphone for private listening.
3. RJ45 - RJ45 plug for connecting to external modem or network access equipment.
5. VGA - For PC display.
6. PC AUDIO - Connect it to the audio output terminal of PC.
9. AV - Connect an external device to the composite VIDEO (V) and AUDIO (L/R) out jacks found on most
equipment.
10. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and
audio output jacks.
4. HDMI1/2/3 IN - To connect to a High Definition (HD) signal output device, such as a set top box, blu ray
disc player or AV receiver.
Wall mount screws size: 4 x (M8 x 12)
75VNET4-11

Connecting External Devices
75VNET4-12

Customizing TV Settings
Use the UP and DOWN arrows
on your remote control or TV
keypad to select your local time
zone.
Welcome to the Element TV
Setup Wizard.
Follow this guide to help setup
your TV to scan channels or
access your external devices
like your Antenna,Set-Top Box,
Blu-ray,DVD,Gaming systems
or other devices.
Use the UP and DOWN arrows on
your remote control or TV
keypad to select the language
of the on screen menu.
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the button on the main unit or on the remote control to
turn the TV on. The red LED indicator will turn blue.
The button on the main unit or on the remote control can only
switch the TV into standby. To completely turn off the TV, please disconnect
the power cord from the power socket.
• The time you turn the TV on, it will go into
the Setup Wizard. Press the buttons
to highlight and select your desired mode and
press to
person to):
75VNET4-13

• If channels cannot be found, this frame
will be displayed automatically.
6
8
3 4
5
7
Auto scanning program stops manually.
Use the UP and DOWN arrows
on your remote control or TV
keypad to select the network
scan type.
Connecting your TV to the
Internet will let you use great
services like Netflix,stream TV
shows and movies,etc.
Customizing TV Settings
SKIP
CONNECT TO THE INTERNET
SCAN CHANNELS FROM THE ANTENNA OR COAXIAL CABLE INPUT
CONNECT A BLU-RAY, DVD, OR OTHER DEVICES
SETUP NETWORK
SKIP
75VNET4-14

• Press on the remote control or on
the main unit to display the source menu, then
use the buttons to cycle among the
different input sources: TV/AV/COMPONENT/
HDMI/VGA/USB, then use the buttons
to highlight the desired source and press
to
• Press the buttons on the main unit or on the remote control repeatedly
to select the channel.
• Press the buttons on the remote control to select the channel directly.
Press "4", and then press button to select channel 4.
Press "4" and "5", and then press button to select channel 45.
Press "1", "2" and "3", and then press button to select channel 123.
• Press the buttons on the main unit or on the remote control to adjust the
volume.
• If you wish to switch the sound off, press the button again or the
button to resume the sound.
Customizing TV Settings
75VNET4-15

Enjoys TV shows & movies streamed instantly over the
Internet.
YouTube your way on the best screen in your house.
Discover, watch and collect the latest movies and
TV shows in high quality 1080p. Free to sign up. No
subscriptions, late fees or commitments.
Free personalized radio that offers effortless and
endless music enjoyment and discovery. Just start with
the name of one of your favorite artists, songs, genres
or composers and Pandora will do the rest. It’s easy to
create personalized stations that play only music you’ll
love.
• Press button on the main unit or on the remote to display the main
interface. Then use the Arrow buttons to select and press to
enter. Use the buttons to select the desired APP and press button to
view. Or press the hotkey on the remote control to enter the desired APP directly.
Customizing TV Settings
Facebook is an American online social media and social
networking service company based in Menlo Park,
California.
Twitter is an online news and social networking service on
which users post and interact with messages known as
"tweets".
As one of the pioneers of Smart TV, NetRange is the leading
global provider of white labeled, turnkey Smart TV and OTT
ecosystems.
Provide tmassive on-demand films, one-touch access
wonderful films
Foxxum provides Smart TV Solutions in close collaboration
with leading brands at all stages of the global consumer
electronics value chain from Silicon Vendors, though Device
Manufacturers, Operators to Content Partners in order to
add value to their products.
Toon Goggles is an American on-demand entertainment
service for children that offers animate shows, games
and music worldwide via.
75VNET4-16

• After entering the picture file, use the buttons to select the desired picture,
then press the to display. When the picture is playing, the picture Function Bar will be
displayed. Use the buttons to select the desired function available on the bar.
• Use the buttons to highlight the option and press , then it will jump
to the inserted drive, press to enter. After entering , use the
buttons to select the picture and press to enter.
• Press button to display the main interface, then use the buttons to
highlight and press to Select among Photos, Music and
Video to view what you like.
Portable drives should be inserted before entering menu.
Directories:10 Files:0 Total:10
Directories:10 Files:0 Total:10
RETURN
RETURN
Customizing TV Settings
75VNET4-17

• After entering the audio use the buttons to select the desired music, then press
the to display. When the music is playing, the music Function Bar will be displayed. Use
the buttons to select the desired function available on the bar.
• Use the buttons to highlight the option and press , then it will jump
to confirm the inserted drive, press to enter. After entering , use the
buttons to select the audio and press to enter.
• After entering the video use the buttons to select the desire video, then press
the to display. When the video is playing, the video function bar will be displayed. Use the
buttons to select the desired function available on the bar.
• Use the buttons to highlight the option and press , then it will jump
to the inserted drive, press to enter. After entering , use the
buttons to select the video and press to enter.
Directories:10 Files:0 Total:10
Directories:10 Files:0 Total:10
Directories:10 Files:0 Total:10
Directories:10 Files:0 Total:10
RETURN
RETURN
RETURN
RETURN
TITLE:08.1 Hz L
ALBUM:ABEX Test CD
YEAR:
SAMPLE FREQUENCY:44100
BIT RATE: 128
TOTAL TIME:60
Customizing TV Settings
75VNET4-18