Videcon VLCD17M User manual

Thankyou forpurchasing ourproduct.
Pleaseread thisUser sManualbefore
using the product. Change without notice
17 &19 GlassTFTLCD MONITOR
USERMANUAL

2
WARNING:
TOREDUCETHERISK OF FIREORELECTRICSHOCK, DONOTEXPOSETHISPRODUCT
TORAINORMOISTURE.
DONOT INSERTANYMETALLICOBJECTTHROUGHVENTILATIONGRILLS.
CAUTION:
CAUTION
Explanation ofGraphical Symbols
Thelightningflashwitharrowheadsymbol,withinan equilateral
triangle,isintended.toalerttheusertothepresenceofuninsulated
"dangerousvoltage"withintheproduct'senclosurethatmaybeof
sufficientmagnitudetoconstituteariskof electricshocktopersons.
Theexclamation pointwithinan equilateral triangleisintended toalert
theusertothepresenceofimportantoperatingandmaintenance
(servicing)instructionsintheliteratureaccompanyingtheproduct.

3
IMPORTANTSAFEGUARDS
1. READ INSTRUCTIONS
All thesafetyand operating instructionsshouldbe readbeforethe unit isoperated.
2. RETAIN INSTRUCTIONS
The safetyand operating instructionsshouldbe retainedforfuturereference.
3. HEED WARNINGS
All warningsonthe unit and inthe operating instructionsshouldbe adhered to.
4. FOLLOWINSTRUCTIONS
All operating and usage instructionsshouldbe followed.
5. CLEANING
Unplug thisunit fromthe wall outlet beforecleaning. Donot useliquidcleanersoraerosolcleaners. Clean onlywithadrycloth.
6. ATTACHMENTS
The manufacturerof this unit doesnotmakeanyrecommendationsforattachments, astheymaycausehazards.
7. WATER AND MOISTURE
Donot usethis unit nearwater. Forexample, nearabathtub,washbowl, kitchensink, laundrytub, inawet basement, orneara
swimming pool.
8. ACCESSORIES
Donot placethisunit on an unstablecart, stand, tripod, bracket, ortable. The unitmayfall,causing seriousinjury, and serious
damage tothe unit. Anapplianceand cart combination shouldbe moved withcare. Quickstops, excessiveforce, and uneven
surfacesmaycausethe applianceandcart combination tooverturn.
9. VENTILATION
Slotsandopeningsat the rearcabinet and bottomareprovided forventilation, thesearetoensurereliableoperation of the unit,
and toprotectitfromoverheating.Theseopeningsmustnotbe blocked orcovered.The openingsshouldneverbe blocked by
placing the uniton abed,sofa,rug,orothersimilarsurface.This unitshouldneverbe placed nearoroveraradiatororheat
source. Thisunitshouldnot beplacedinabuilt-ininstallation suchasabookcaseorrackunlessproperventilationisprovided or
the manufacturer sinstructionshavebeen adhered to.
10. POWER SOURCE
This unitshouldbe operated onlyfromthe type ofpowersourceindicated on the rating plate.Ifyou arenotsureofthe type of
powersupplytoyourhome,consult yourappliancedealerorlocalpowercompany.
11. POWER-CORD PROTECTION
Power-supplycordsshouldbe routed sothattheyarenotlikelytobe walkedon orpinched byitemsplaced upon oragainstthem,
paying particularattention tocordsat plugs, conveniencereceptacles, and the pointwheretheyexit fromthe appliance.
12. LIGHTNING
Toprotectyourunitfromalightning storm,orwhen it is left unattended and unused forlongperiodsof time,unplug itfromthe
wall outletand disconnectthe antennaorcablesystem.This will preventdamage tothe unitdue tolightning and powerline
surges.
13. POWER LINES
Anoutsideantenna systemshouldnotbe located inthe vicinityofoverhead powerlinesorotherelectric lightorpowercircuits,or
whereitcan fall ontooragainst suchpowerlinesorcircuits.When installing anoutside antenna system,extremecareshouldbe
taken tokeep fromtouchingsuchpowerlinesorcircuits, ascontactwiththemmight be fatal.
14. OVERLOADING
Donot overload walloutletsand extension cords,asthis can result inariskof fireorelectricshock.
15. OBJECTAND LIQUID ENTRY
Donot pushobjectsthrough anyopeningsinthisunit, astheymaytouchdangerousvoltage pointsorshort out partsthat could
result infireorelectricshock. Neverspillorsprayanytype of liquidintothe unit.
16. HEAT
The product shouldbe situated awayfromheatsourcessuchasradiators, heat registers,stoves, orotherproducts(including
amplifiers)that produceheat.
17. CONNECTING
When you connectthe producttootherequipment, turnoff the powerand unplug all ofthe equipmentfromthe wall outlet. Failure
todo somaycauseaproduct damage. Read theowner'smanualof the otherequipmentcarefullyand followtheinstructions
when making anyconnections.
18. LCD
Donot press onorjoltthe LCD panel. Doingsomaycausethe LCD panelglass tobreakandinjurymayoccur. Shouldthe LCD
panelbe broken and liquidleaksout, do notinhaleorswallowit. Doingsomaycausepoisoning. If you havegot it intoyour
mouth,washit outand consult yourdoctor. If yourhandsorclotheshavetouched it, wipe themwithalcoholandacleaning cloth
and then washthemwell.
ImportantInformation

4
Federal CommunicationsCommission(FCC)Statement
ThisEquipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,
pursuanttoPart15oftheFCC rules.Theselimitsaredesigned toprovidereasonableprotection
againstharmfulinterferenceinaresidential installation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalled andusedin accordancewiththeinstructions,may
causeharmfulinterferencetoradiocommunications.However,thereisnoguarantee that interference
willnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
television reception,whichcanbedetermined byturning theequipmentoff and on,theuseris
encouraged totrytocorrect theinterferencebyoneormoreofthefollowingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipment intoan outleton acircuitdifferent fromthat towhichthereceiveris
connected.
-Consultthedealeroran experienced radio/TVtechnician forhelp.
lYouarecautionedthatchangesormodificationsnotexpresslyapprovedbytheparty
responsibleforcompliancecouldvoidyourauthoritytooperatetheequipment.
SafetyPrecautions
ThisdevicecomplieswithPart15FCCRules.Operation issubject tothefollowing two
conditions:
(1)Thisdevicemaynotcauseharmful interference.
(2)Thisdevicemustaccept anyinterferencereceivedincludinginterferencethatmay
causeundesired operation

5
Warning…………………………………………………………………………………………………… 2
ImportantInformation…………………………………………………………………………………… 3
SafetyPrecautions………………………………………………………………………………………..4
TableofContents………………………………………………………………………………………… 5
Components………………………………………………………….. ………………………………….5
Feature…………………………………………………………………………………………………….6
Exploring YourNewMonitor……………………………………………………………………………..7
BacksideConnections…….………………………………………………………………………….….8
ConnectingyourMonitor………………………………………………………………………………… 9
ConnectingDevice……………………………………………………………………………………….10
Setup yourMonitor……………………………………………………………………..………………... 11
RemoteControl……………………………………………………………………………………………12
General Setup……………………………………………………………………………………….…… 14
Video Setup………………………………………………………………………………………….…… 15
VGASetup………………………………………………………………………………………………… 16
AudioSetup……………………………………………………………………………………………….17
PIPSetup……………………………………………………………………………………………….…18
LCD MonitorMountingGuide…………………………………………………………………………… 19
Desktop…………………………………………………………………………………………… 19
Mounting themonitorontherack……….……………………………………………………… 19
ArmMount (VESAstandard)……….………………………………………………………..…. 19
Troubleshooting………………………………………………………………………………………..…20
LCD ColorMonitorSpecifications………………………………………………………………….…..21
LCD ColorMonitorDimensions ……………………………………………………………………..…22
Components
(1)LCD ColorMonitor 1
(2)Accessories
(a)Powercord1
(b)UserManual 1
(c)RemoteControl 1
TableofContents

6
■Professional TFTLCD forsurveillancein17”and19”withmultipleconnection.
■CompatiblewithVGA(640X480),SVGA(800X600),XGA(1024X768), SXGA(1280X1024)resolution,
■Picture-In-Picturefeaturethat allowmulti-picturedisplay
■Highbrightness levelandcontrastration withsuperwideviewing angle
■Built-in3Dcombfilterand3Dde-interlaceforcrispypictureperformance
■Fast responsetimeandrefreshratewithout timelagging.
■Provides6500Kand9300Kcolortemperatureselection foruser spreference
■Video inputssupport NTSC/PALstandards
■ProvidesKeyLockandpowermemoryfunction foreasymanagement
■CCD modecontrolthatenableauto-adjust incomingvideo signal level
■Video loopingoutputsupports75ohmautotermination
■Supportaudioandlive-out function withstereo phonejackoutput
■VESAstandards(100mmX100mm)bracket
■Optionalrack mountbracket for19”rackconsole(Tiltablestyle)
Feature

7
Youcanoperateyourmonitorbyusingthebuttonson thefront panel.Thesidepanelsprovidethe
inputstoconnectotherequipmenttoyourmonitor.
FrontPanel
BackSide
ExploringYourNewMonitor
1
2
1. MonitorPowerON/OFF
indicator
2. Receiver:Remotecontrol IRsensor

8
Note:ConnectionsofAudio
BacksideConnections
1,2 AUDIO2IN(R,L)
Stereo AudioSignal Input, thisinputisforAV2
(RefertoNotebelow)
3,4AUDIO2OUT(R,L)
AudioloopingoutputsforAUDIO2
5,6AUDIO1IN(R,L)
Stereo AudioSignal Input, thisinputisforAV1
orS-Video (RefertoNotebelow)
7,8AUDIO1OUT(R,L)
AudioloopingoutputsforAUDIO1
9S-VIDEOIN
Y/Cseparated signal input
10VIDEO2OUT
Video loopingoutputforVIDEO2
11VIDEO2IN
Compositesignal Input forVIDEO2
12VIDEO1OUT
Video loopingoutputforVIDEO1
13 VIDEO1IN
Compositesignal Input forVIDEO1
14DCOUTPUT
DC 12V/ 500mApoweroutput
(Supporting forPVMunit)
15. PCAUDIOIN
16VGAIN
17.ACPOWERSOCKET
AC100V~240VInput
Audio1 Audio2 PCAudio
PC
AV1
AV2
S-Video

9
Ifyoudon thaveexperiencein electronicequipment connectionbefore,youmaywishtoread this
section. (Cablesarenot supplied, just forreference)
lAudiocablesareusuallycolorcodedaccording touse:redandwhiteforaudio.Thered audiocable
isforthestereo right channel,andthewhiteaudiocableisforthestereoleft (ormono)channel. If
youlookat therearpanel oftheMonitor,youwillsee that theterminalsarecolorcoded inthesame
mannerasthecables.
lS-video cablesprovidebetterpictureperformancethanstandardvideocables.S-video cablescan
onlybeused withS-video compatiblecomponents.
lBNCcableprovidesbetterconnectionandpictureperformance.
.
RCA AudioCable
S-Video Connector
BNC Connector
PC AudioConnector
VGAConnector
Connecting yourMonitor
NOTE:
Topreventequipment damage,
Donot plug inanypowercordsuntil you have
finished connecting all equipment.

10
a. ConnectPCtoMonitorthroughVGAconnectorasshownontheabovepicture
b. ConnectExternal devicesuchasDVDorGamePlayertoMonitorasshownon
theabovepicture
c. Connect CCD Camera1and2toMonitorthroughVideo Input1and2
(BNC Connector)asshowingon theabovepicture
d. Support Resolution
Although this MonitorsupportsaboveRGBsignals, anyresolutionsnot matched bythis Monitor(SXGA)will be
expanded orshrunk, whichwill affect image quality.
Toview high-qualityimages, it is recommended that thePC's resolution shouldbe set toSXGA(1280x1024)
resolution.
ConnectingDevice
17
MonitorDisplaymodes
Mode Resolution Refreshrate
VGA640x480 upto75Hz
SVGA800x600 upto75Hz
XGA1024x768 upto75Hz
SXGA1280x1024 up to75Hz
19
MonitorDisplaymodes
Mode Resolution Refreshrate
VGA640x480 upto75Hz
SVGA800x600 upto75Hz
XGA1024x768 upto75Hz
SXGA1280x1024 up to75Hz

11
AUTO:Auto-optimizedisplaying pictureunderPCmode.
Enter: This “Auto”Button can beeither “Enter”function inOSDMenu)
CCDMode: UnderAV/1/AV2/ S-Video press Auto can bechangedto
CCD/Video modetoggle.
MENU: OSDmenuON/ OFF control.
(EXIT Item)
ADJUST:Increaseordecreasethevalueon OSDmenu.
Up: IncreasevalueorturnON/ OFF function.
Down: DecreasevalueorturnON/ OFF function
SOURCE: Select input signalfromAV1,AV2, S-Video orVGA(PC).
POWER: MonitorpowerON/ OFF.AtOFF mode,monitorwill beatstandbystatus.
GreenLight:ONMode
OrangeLight:PowerSaving(Refertonotbelow)
RedLight: OFF Mode
Note:1.AV1,AV2,S-Video:When thereisno inputsignal,LCDmonitor
will intoPowerSavingmodeafter60seconds.
2.VGA:Whenthereisno inputsignal,LCDmonitorwillintopower
saving modeafter5seconds.
3.PIP: When thereisno signalon both inputsources, LCD
monitorwill into PowerSaving modeafter120seconds.
SetupyourMonitor

12
KeyFunction
RemoteControl
Power TurnON/ OFF monitor.At OFF
modemonitorwillbestandby
status.
CCD/VIDEO
SelectCCDmodeorVideo mode
in AVInput source.
PIPZOOM 1.PIPmodeon/off
2.SelectPIPsizeofpicture.
PIPSOURCE Select PIPinput source
PIPSWITCH PIPsourceswitching.
AV1Select displaytoVideo1.
AV2Select displaytoVideo2.
S-VIDEOSelect displaytoS-Video.
VGASelect DisplaytoVGA.
DVISelect displaytoDVI.
(Optional function bymonitor)
YPbPr Select displaytoYPbPr.
(Optional function bymonitor)

13
MUTEThe buttoncontrolsaudiovolumetomute.
VOLUME Used adjust+/-toincrease/ decreasevolume..
+Increasevolumevalue
-Decreasevolumevalue
Display Displaysvideo sourcetitle.
AUDIO PIPaudiosourceswitch.
ENTER 1. Enteraselected Itemof Menu.
2. Executeitemfunction.
Moveselected Itemof theMenu.
▲/ Adjustvalueoftheselected Item.
MENU1.OSDMenuon / off.
2. ReturnMainMenu
3. Exitaselected Menu/ Item.
SCALEMODE Select sizeof picture.
VGAAUTOAutoadjustment function.
RemoteControl

14
Auto Source Detect:The monitorwillautodetect thevideo sourcewhenpowerON.
OSDLanguage:Multi-LanguageselectioninEnglish.
PowerONControl :Thisfunction istoassignaspecificvideo signalwhenpowerON.
KeyLock :The Key-Lockfunction isprovided toprevent tempering.
Toreleasekeylock functionpress AUTO and DOWN
PowerMemorize: Thisfunction enablethemonitortomemorizethepreviouspower
statusbeforepowerbreak.
Channel Display:Thisfunction istoallowthechannel titletobedisplayedon the
monitor.
CCDMode:Ifvideo signal sourcedirectlycomesfromCCD camera,usingCCD
Modeissuggested toobtainbetterpictureperformance.
Default:Returntofactorydefaultvalue.
General Setup

15
Brightness :Adjuststheoverallpictureshadeandbrightness.
Contrast:Permitsadjustmentofcontrast betweenlight and darkareasofthe
picture.
Color:Addscoloringtotheblackandwhitepicturecontent(of acolor
signal), andisusuallysetforviewer spreferenceincolorsaturation.
TINT:Adjustsallthecolorson thescreen,but ismostnoticeabletotheeye
in redsandyellows,andisalsousuallyset forpleasingfacetones.
Sharpness:Setsthedesiredsharpeningenhancement tothepicture.
ColorTemperature:Selectscolortemperatureof either6500°Kor9300°K.
ScaleMode:Selection of picturesize.
H-position :Allowsadjustment forhorizontal position.
V-position :Allowsadjustment forvertical position.
AGCControl :Thisfunction providesasmall scaleof backlightenhancementto
compensatetheinsufficientluminance.
Default:Returntofactorydefaultvalue.
VideoSetup

16
Auto:Autodetect screen detaildatasuchasclock and phase.
Brightness :Adjuststheoverallpictureshadeandbrightness.
Contrast:Permitsadjustmentofcontrast betweenlight and darkareasofthe
picture.
ColorTemperature:Selectscolortemperatureof either6500°Kor9300°K.
H-position :Allowsadjustment forhorizontal position.
V-position :Allowsadjustment forvertical position.
Clock:Isusedtoadjust bestpicturequality.It adjuststhenumbersofthe
pixelclockacross onelinetime.Thereforeitcanaffect thepicture
position andsize.
Note:improperadjustmentwill caused imagefailure.
Phase :Isusedtoadjust bestpicturequality.It adjuststhesampling phase
across onepixel time.When thephaseisnotadjusted properly, the
picturewillbeunclear.Thereforethisvalueshouldbecarefully
adjusted.
Note:improperadjustmentwill causeimagefailure.
Default:Setsmonitortotheoriginal factorysetting.
VGASetup
Auto
Brightness
Contrast
ColorTemperature
H-position
V-Position
Clock
Phase
Default
No
80
100
9300
50
50
50
50
No

17
Volume :Controlsbuilt-inspeakers outputvolumes
Mute:Todisabletheaudiofunction.Toenable,press MUTEagain.
Default:SetsAUDIOsettingstotheoriginal factorysetting.
Audio Setup

18
Multi-Mode:Thisfunction allowthePIPmodetobeselected.
Sub Source :The functionallowthePIPSub sourcetobeselected.
Sub WindowSize: The selection ofPIPwindowsize.
Sub WindowH-Position : Control thePIPwindowposition inhorizontalposition.
Sub WindowV-Position : Control thePIPwindowpositioninverticalposition.
Switching: EnablePIPsourcesswitching.
SwitchingTime:ControlPIPsourceswitchingtime.
AudioSource:Select PIPmodeaudiosource.
*PIPHotkey:Auto+Menu
PIPSetup
ack Mount

19
DesktopArmMount(VESAStandard)
Adjust theviewingangleofLCDtofitmost
comfortablemonitoringstatus.
Mounting themonitorontherack
Note:
Whenadjustingtoarack,you willneedtouseanoptionalrackmount tothebacksideof theLCD
monitor.
LCD monitorMountingGuide
ack Mount
WhenadjustingtheVESAStandardArmsto
thebacksideoftheLCD monitor, pleaseuse
the4x8(mm)screw.
Forfurtherinformation spleaserefertothe
ArmManual.
17”19”

20
Beforecallingaservicetechnician,pleasecheckthefollowing tableforapossiblecauseoftheproblem
andsomesolution.
SymptomSolution
Monitorwillnotturnon ●Makesurethepowercordisplugged in,then press POWERbutton.
Nopicture,nosound●Checkcableconnections.
Nosound,pictureOK●CheckaudioCableConnections
●TrypressingVolumeup button in theMenu.
Poorcolor, sound OK ●Checkcableconnections
●Adjust Video setupmenu.
Poorcolorornocolor●Adjust Colorand/ orTINT(NTSConly)
Troubleshooting