Videosec RF-YKCZ-EU-220 User manual

RF-YKCZ-EU-220
Wireless Remote Control Socket Instruction Manual

Wireless remote control socket refers to one or more circuit wiring can be inserted into
the seat, through which you can insert a variety of wiring, easy to connect with other circuits. A
power outlet is an electrical device that provides a power interface for home appliances. It is also
an electrical accessory used in residential electrical design. It has ten close relationships with
people's lives.
Working mode
The wireless remote control socket has two working modes: manual and remote control.
The keys on the interface are the keys for manual opening and the keys for learning with the remote
control.
Switching mode
There are two adjustable working modes in the remote control working mode, which can be
switched through the learning buttons on the interface, and can be combined with any
combination of wireless remote controllers:
- Latching <self-locking> mode of operation: the same key as the remote controller is used
to learn the code, the same button is pressed once, and then the button is pressed again;
- Toggle < interlocking> work mode: that is, learning with two different key pairs on the
remote control, press one key to open, press another key to close.
The Latching <self-locking> learning code method
1. Press the learning button for about 3 seconds, the learning indicator on the interface of
the remote control socket will be on and released
2. Press any key on the remote control twice immediately. After the learning indicator flashes
three times, it will be extinguished, indicating successful learning.
Toggle < interlocking> learning code method
1. Press the learning button for about 3 seconds, the learning indicator on the interface of
the remote control socket will be on and released
2. Press any button (or unlock button) on the remote control immediately, and then press
another button (or off lock button) on the remote control, the learning indicator flashes.
Ashing out after three times indicates successful learning.
Clear code method
(Please clear code and then code before replacing work method)
Long press the remote control socket interface learning key for about 15 seconds, learning indicator
light from light to off means clear code successfully.
Technical details
- Operating frequency: 433.92MHz
- Operating voltage: AC220V, Maximum load: ≦ 2000W
- Rear interface: 1m
- Weight: 0.115KG