Videotek TVM9100PKG Owner's manual

Printed November 2008
Item #061793 Rev. -
Copyright © 2008 by Harris Corporation.
All rights reserved.
Contents of this publication may not be reproduced in any form without permission of Harris Corporation.
This instrument, in whole or in part, may be protected by one or more US (US Patent 6,069,607) or foreign patents or
patent applications.
Specifications subject to change without notice.
IBM is a registered trademark of International Business Machines Corporation
PS2 is a registered trademark of International Business Machines Corporation
Dolby, AC-3, Dolby E, and the double D symbol are registered trademarks of Dolby Laboratories
Videotek and the Videotek logo are registered trademarks of Harris Corporation.
CineSound is a registered trademark of Harris Corporation.
IntelliMouse is a registered trademark of Microsoft Corporation
TVM Series
Multi-Format 3Gb/s/HD-SDI/SD-SDI Monitor
Installation and Operation Handbook

TVM Series Installation and Operation Handbook iii
Copyright © 2008, Harris Corporation
Operator’s Safety Summary
WARNING: These instructions are for use by qualified personnel only. To reduce
the risk of electric shock, do not perform this installation or any servicing unless you
are qualified to do so. Refer all servicing to qualified service personnel.
Ensuring Safety
•The unit should not be exposed to dripping or splashing, and no objects filled
with liquids, such as vases, shall be placed on the unit.
•When the unit is to be permanently cabled, connect the protective ground
conductor before making any other connections.
•Operate built-in units only when they are properly fitted into the system.
•For permanently cabled units without built-in fuses, automatic switches, or
similar protective facilities, the AC supply line must be fitted with fuses rated to
the units.
•Before switching on the unit, ensure that the operating voltage set at the unit
matches the line voltage, if appropriate. If a different operating voltage is to be
set, use a fuse with the appropriate rating. Refer to the Installation Instructions.
•Units of Protection Class I with an AC supply cable and plug that can be
disconnected must be operated only from a power socket with protective ground
contact:
•Do not use an extension cable—it can render the protective ground
connection ineffective.
•Do not intentionally interrupt the protective ground conductor.
•Do not break the protective ground conductor inside or outside the unit or
loosen the protective ground connection; such actions can cause the unit to
become electrically hazardous.
•Before opening the unit, isolate it from the AC supply. Then ensure that:
•Adjustments, part replacements, maintenance, and repairs are carried out by
qualified personnel only.
•Safety regulations and rules are observed to prevent accidents.
•Only original parts are used to replace parts relevant to safety (for example,
the power on/off switches, power transformers, and fuses).
•Replaceable fuses can be hazardous when live. Before replacing a fuse,
disconnect the AC power source.
•Use caution when cleaning the equipment; isopropyl alcohol or similar solvents
can damage or remove the labels.
•Observe any additional safety instructions specified in this manual.

Operator’s Safety Summary
iv TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
Explanation of Symbols
These symbols may appear on Harris equipment:

TVM Series Installation and Operation Handbook v
Copyright © 2008, Harris Corporation
Directives and Compliances
This section provides information concerning Harris Corporation compliance with EU
Directive 2002/95/EC and EU Directive 2002/96/EC.
Restriction on Hazardous Substances (RoHS) Directive
2002/95/EC
Directive 2002/95/EC—commonly known as the European Union (EU) Restriction on
Hazardous Substances (RoHS)—sets limits on the use of certain substances found in
electrical and electronic equipment. The intent of this legislation is to reduce the
amount of hazardous chemicals that may leach out of landfill sites or otherwise
contaminate the environment during end-of-life recycling. The Directive, which took
effect on July 1, 2006, refers to the following hazardous substances:
•Lead (Pb)
•Mercury (Hg)
•Cadmium (Cd)
•Hexavalent Chromium (Cr-V1)
•Polybrominated Biphenyls (PBB)
•Polybrominated Diphenyl Ethers (PBDE)
In accordance with this EU Directive, all Harris products sold in the European Union
will be fully RoHS-compliant and “lead-free.” (See the Harris Premier website for
more information on dates and deadlines for compliance.) Spare parts supplied for the
repair and upgrade of equipment sold before July 1, 2006 are exempt from the
legislation. Harris equipment that complies with the EU directive will be marked with a
RoHS-compliant symbol, as shown in Figure 1.
Figure 1. RoHS Compliance Symbol
Waste from Electrical and Electronic Equipment
(WEEE) Directive 2002/96/EC
The European Union (EU) Directive 2002/96/EC on Waste from Electrical and
Electronic Equipment (WEEE) deals with the collection, treatment, recovery, and
recycling of electrical and electronic waste products. The objective of the WEEE
Directive is to assign the responsibility for the disposal of associated hazardous waste
to either the producers or users of these products. As of August 13, 2005, producers or
users are required to recycle electrical and electronic equipment at end of its useful life,
and must not dispose of the equipment in landfills or by using other unapproved
methods. (Some EU member states may have different deadlines.)

Directives and Compliances
vi TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
In accordance with this EU Directive, Harris Corporation and other companies selling
electric or electronic devices in the EU will affix labels indicating that such products
must be properly recycled.
(See the Harris Premier website for more information on dates and deadlines for
compliance.) Contact your local Harris sales representative for information on
returning these products for recycling. Harris equipment that complies with the EU
directive will be marked with a WEEE-compliant symbol, as shown in Figure 2.
Figure 2. WEEE Compliance Symbol

TVM Series Installation and Operation Handbook vii
Copyright © 2008, Harris Corporation
Contents
Operator’s Safety Summary...........................................................................iii
Ensuring Safety................................................................................................................... iii
Explanation of Symbols....................................................................................................... iv
Directives and Compliances...........................................................................v
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC...................................v
Waste From Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC ..................v
Section 1 ♦Introduction .................................................................................1
Product Description..............................................................................................................1
Standard Features ...............................................................................................................1
TVM Series Configuration ....................................................................................................2
Console ..........................................................................................................................2
Graphics Engines (requires one) .....................................................................................2
Audio Options (supports one) ..........................................................................................2
Video Input Options (supports two)..................................................................................4
Auxiliary Options .............................................................................................................5
TVM Package Configurations ..........................................................................................5
Video Standards Supported .................................................................................................7
Front and Back Panels.......................................................................................................11
Service and Support...........................................................................................................12
Section 2 ♦Installation .................................................................................13
Inspecting the Shipment.....................................................................................................13
Rack Mounting the TVM.....................................................................................................14
Connecting the TVM ..........................................................................................................16
Ethernet Setup..............................................................................................................19
Configuring the TVM for Remote Control............................................................................21
Configuring the TVM/VTM with the RCU 1000 Remote Control......................................21
Section 3 ♦General Operation.....................................................................24
Terms ................................................................................................................................24
Introduction to Operating the TVM Series...........................................................................24
Types of Controls...............................................................................................................25
Front Panel Illumination......................................................................................................25
Sleep Mode........................................................................................................................26

Contents
viii TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
Selecting a Pane................................................................................................................27
Full-Screen Display Selection........................................................................................ 27
Selecting an Input for a Pane ............................................................................................. 27
Format Mismatch Message ........................................................................................... 28
Linking Panes ............................................................................................................... 28
Selecting the Function for the Pane.................................................................................... 28
Function Not Allowed Message.......................................................................................... 28
Option Not Installed Message ............................................................................................ 28
Navigating the Pane Setup menu....................................................................................... 29
External Reference ....................................................................................................... 29
External Reference ................................................................................................... 31
EXT Setup................................................................................................................ 31
Pane Overview .................................................................................................................. 31
Main Title Bar................................................................................................................ 32
Icons ........................................................................................................................ 32
Status Bar..................................................................................................................... 33
The Waveform Display....................................................................................................... 33
Waveform Front Panel Selections ................................................................................. 36
Moving the Waveform using the Setup Knobs ........................................................... 36
Sweep Buttons ......................................................................................................... 37
Gain Buttons............................................................................................................. 39
Placing the Waveform Display in Line Select Mode................................................... 40
Waveform Cursor Selections..................................................................................... 40
Waveform Pane Menu Selections ................................................................................. 41
Filter Selection.......................................................................................................... 44
Parade and Overlay Selections ................................................................................. 44
HD or SD Format...................................................................................................... 44
Blanking (SDI Signals only)....................................................................................... 45
Component Sequence (SDI Signals only) ................................................................. 45
Center Waveform...................................................................................................... 45
Waveform Setup....................................................................................................... 45
Utilizing the EYE Display (TVM-VTM-EYE-H, TVM9100PKG-EH, TVM9100PKG-ES,
TVM9140PKG-EH, TVM9140PKG-ES) .............................................................................. 45
Eye Pattern Observation ............................................................................................... 47
Eye Pattern Rise Time .................................................................................................. 48
Jitter Meter and Eye Pattern Correlation........................................................................ 48
Horizontal Magnification and Zoom in Eye Pattern Mode........................................... 48
Eye Pattern Cursor Selections .................................................................................. 50
Eye Pattern Pane Menu Selections ............................................................................... 51

Contents
TVM Series Installation and Operation Handbook ix
Copyright © 2008, Harris Corporation
Jitter High Pass Filter (HPF) Selection...........................................................................51
Trigger Mode.................................................................................................................52
Eye Pattern Setup.....................................................................................................52
Utilizing the EYE and Jitter Displays (TVM-VTM-JEM, TVM9100PKG-EJ, and
TVM9140PKG-EJ) .............................................................................................................52
Eye Pattern Measurement Parameters/Considerations..................................................59
Eye Pattern Parameters................................................................................................59
Jitter Meter and Eye Pattern Correlation ........................................................................59
Horizontal Magnification and Zoom in Eye Pattern Mode ...........................................59
Eye Pattern Cursor Selections...................................................................................60
Eye Pattern and Jitter Pane Menu Selections ................................................................62
Jitter High Pass Filter (HPF) Selection...........................................................................63
Trigger Mode.................................................................................................................63
Jitter Waveform Mode ...................................................................................................63
Eye Pattern Setup.....................................................................................................64
Utilizing the Vector Display.................................................................................................64
Controlling the Vector....................................................................................................69
Gain Buttons.............................................................................................................69
Placing the Vector Display in Line Select Mode .........................................................71
Vector Cursor Selections...........................................................................................71
Vector Pane Menu Selections .......................................................................................72
Standard ...................................................................................................................73
Scaled to Composite (SD and HD only).....................................................................73
Vector Position (Centering the Vector).......................................................................74
Vector Setup.............................................................................................................74
Gamut Display ...................................................................................................................74
Composite Gamut .........................................................................................................76
RGB Gamut Display......................................................................................................77
Placing the Gamut Display in Line Select Mode............................................................79
Gamut Zoom.................................................................................................................79
Gamut Pane Menu Selections .......................................................................................81
Color Space..............................................................................................................81
Gamut Setup.............................................................................................................81
Picture Display...................................................................................................................81
Picture Pane Menu Selections.......................................................................................83
Native Mode..............................................................................................................84
Delay ........................................................................................................................84
Gamut Highlighting....................................................................................................84
Picture Setup ............................................................................................................84

Contents
x TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
Closed Caption ......................................................................................................... 84
Timing Display................................................................................................................... 86
Things to Remember When Using the Timing Display ................................................... 88
Timing Pane Menu Selections....................................................................................... 89
Reference Selection.................................................................................................. 89
Timing Mode............................................................................................................. 89
Alarm Display .................................................................................................................... 90
Alarm Log Display......................................................................................................... 90
Alarm Status Display..................................................................................................... 92
Alarm Log and Status Pane Menu Selections................................................................ 94
Display ..................................................................................................................... 94
Alarm Log Display..................................................................................................... 94
Mute Alarms ............................................................................................................. 95
Video Alarm Analog .................................................................................................. 95
Video Alarm Digital ................................................................................................... 95
Audio Alarms ............................................................................................................ 95
Audio Display..................................................................................................................... 95
Audio Scales................................................................................................................. 96
Vertical Audio Displays ............................................................................................. 96
CineSound Display ................................................................................................. 102
Loudness Display ................................................................................................... 104
Expanding the Audio Display....................................................................................... 106
Audio Menu Selections ............................................................................................... 106
Audio Input Check .................................................................................................. 106
Lissajous ................................................................................................................ 106
V2A Timing Display (TVM-A3-OPT V2A only) ......................................................... 107
Audio Setup............................................................................................................ 107
Option Display ................................................................................................................. 107
Display........................................................................................................................ 108
Option Setup........................................................................................................... 108
Dolby Metadata Display (Option Dependent)............................................................... 109
Video Metadata........................................................................................................... 111
XDS............................................................................................................................ 113
Teletext....................................................................................................................... 114
CRC ........................................................................................................................... 114
ASI (Option TVM-VTM-ASI only)................................................................................. 117
DVB Stream Formats.............................................................................................. 118
Bandwidth and Trending Screen ............................................................................. 119