ViewSonic E70-10 User manual

ViewSonic®
- User Guide
- Guide de l’utilisateur
- Guía del usuario
- Guia do usuário
ViewSonic®
E70cB
CRT Monitor
Model No. : VCDTS22355-11

ViewSonic E70cB ViewSonic E70cB
i ii
ViewSonic E70cB ViewSonic E70cB
i ii
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numeique de la Classe B repecte toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
CE Conformity for European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/
EEC as amended by 92/31/EEC and 93/68/EE C Art.5 with regard to
“Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC
Art.13 with regard to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.

ViewSonic E70cB ViewSonic E70cB
i ii
ViewSonic E70cB ViewSonic E70cB
i ii
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in
this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.

ViewSonic E70cB 1
Content
Compliance Information ........................................................................................ i
Important Safety Instructions .................................................................................. ii
Copyright Information ............................................................................................. 2
Product Registration ................................................................................................ 2
Geeting Started ..........................................................3
Package Contents .................................................................................................... 3
Precautions .............................................................................................................. 3
Quick Installation .................................................................................................... 4
Using the Monitor ......................................................5
Setting the Timing Mode ......................................................................................... 5
Adjusting the Screen Image .................................................................................... 6
OSD Lock Settings .................................................................................................. 7
Main Menu Controls ............................................................................................... 8
Other Information ......................................................10
Specifications .......................................................................................................... 10
Troubleshooting ....................................................................................................... 11
Cusomer Support ..................................................................................................... 12
Cleaning the Monitor .............................................................................................. 13
Limited Warranty .................................................................................................... 14

ViewSonic E70cB 2
Copyright Information
Copyright© ViewSonic Corporation, 2006. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency
(EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product
meets the ENERGY STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration
form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
E70cB
ViewSonic 17” CRT Monitor
VCDTS22355-11
E70cB-1_UG_ENG Rev. 1A 02-09-06
_____________________________________
_____________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. For TCO’03 recycling information, please refer
to our website:
1. USA: www.viewsonic.com/pdf/recyclePlus.pdf
2. Europe: www.viewsoniceurope.com
3. Taiwan: recycle.epa.gov.tw.

ViewSonic E70cB 3
Geeting Started
Congratulations on your purchase of a ViewSonic® color monitor.
Important! Save the original box and all packing material for future shipping needs.
Note : The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows Me (Millennium),
and Windows XP.
Package Contents
Your package includes:
• Color monitor
• DB-15 video cable
• Power cord
• ViewSonic Wizard CD-ROM
• Quick Star Guide
Note : The CD jacket contains the Quick Start Guide, and the CD includes the User Guide
PDF files and INF/ICM display optimization files. The INF file ensures compatibility with
Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-
screen colors. ViewSonic recommends that you install both files.
Precautions
• For best viewing conditions sit at least
18” from the monitor.
• Avoid touching the screen with your
fingers. Oils from the skin are difficult
to remove.
• Never remove the rearcover. The
monitor contains high voltage parts. You
may suffer serious injury if you touch
these parts.
• Avoid exposing the monitor to direct
sunlight or another heat source,
including an open flame. The monitor
should be facing away from direct
sunlight to reduce glare.
• Always handle your monitor with care
when moving it.
• Place your monitor in a well ventilated
area. Do not place anything on the
monitor that prevents adequate
dissipation of heat.
• Ensure the area around the monitor is
clean and free of moisture.
• Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• If smoke, abnormal noise, or strange
odor is present, immediately switch
the monitor off and call your dealer
or ViewSonic. It is dangerous to
continueusing the monitor.

ViewSonic E70cB 4
Quick Installation
1. Connect power cord
Connect the power cord to a properly
grounded AC outlet.
2. Connect video cable
Ma ke su re b ot h t he mon it or a n d
computer are turned OFF.
• Connec t t he v ideo cable t o t he
computer.
Macintosh® users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug the
video cable into the adapter.
To order a ViewSonic® Macintosh
adapt e r, c ontac t ViewSo n ic. See
“Customer Support” on page 12.
3. Turn ON monitor and computer
Turn ON the monitor, then turn ON the
computer. This sequence (monitor before
computer) is very important.
Note : At this point Windows users may
receive a message asking them to install
the INF file.
4. Install Display Optimization files
(INF and ICM files)
(1) Insert the ViewSonic Wizard CD-
ROM into your computer’s CD-ROM
drive.
Note : If your computer does not have a
CD-ROM drive, see “Customer Support”
on page 12.
(Continued)
(2) Wait for the CD-ROM to auto-start.
Note : If the CD-ROM does not auto-
start:
double-click on the CD-ROM icon in
Windows Explorer, then double-click on
viewsonic.exe.
(3) Follow the on-screen instructions.
5. Windows users: Set the Timing
Mode (resolution and refresh rate)
Example: 1024 X 1024 @ 75Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card’s user guide.
Installation is complete. Enjoy your
new ViewSonic color monitor.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 2. (See
back of monitor.)
To register your product go online to
www.viewsonic.com.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic.
Video cable
Power cord
AC wall outlet

ViewSonic E70cB 5
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and
refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the
OnView® controls to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1024 x 7684 @ 85 Hz.
To set the Resolution:
1. Right-click on the Windows desktop.
2. Click Properties on the drop-down menu.
3. Click the Settings tab.
4. Move the slider pointer which displays in the Desktop area or Screen area in the window.
Note : The refresh rate should already be set if you have done the CD installation (or refer to
your graphics card documentation).

ViewSonic E70cB 6
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OnView® controls which
display on the screen. The OnView controls are explained at the top of the next page and are
defined in “Main Menu Controls” on page 8.
MAIN MENU (1)
EXIT : SELECT :
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
12
ViewSonic
Displays Main Menu; also saves
changes/exits Main Menu.
Main Menu
With OnView controls
Front Control Panel
Scroll through menu options
and adjust the displayed
control
Displays control screen for
highlighted control (or pair
of controls). Also, toggles
between pairs of controls on
some control screens
Power Light Power On/Off

ViewSonic E70cB 7
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
• OSD Lock : Press and hold the [1] and [▼] buttons on the face of the monitor for 5
seconds. The message “OSD LOCK” will then display briefly, indicating that the OSD
image settings are now locked.
• OSD Unlock : Press and hold the [1] and [▼] buttons again for 5 seconds. The message
“OSD UNLOCK” will then display briefly, indicating that the OSD image settings are
now unlocked.
Do the following to adjust the screen image:
1. To display the Main Menu, press button [1].
MAIN MENU (1)
EXIT : SELECT :
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
12
2. To select a control you want to adjust, press the arrow buttons on the front control panel
of your monitor and scroll through the choices. When the control you want is highlighted,
press button [2].
Note : Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3. To adjust the selected control, such as CONTRAST in the sample below, press the arrow
buttons.
EXIT : 1 BRIGHTNESS : 2
CONTRAST
4. To save the control setting and Exit the menu press button [1] twice.