ViewZ VZ-IPM Series User manual

12262023-Rev. A
USER MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
24" PROFESSIONAL IP INPUT MONITOR
VZ-IPM SERIES

2User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Safety Instrucon
Installaon
Funcon
Mounng Guide
RMA
Specicaon
Warranty
1. Mark Indicaon & Substance
1. Package
2. Control and Funcon
1. Monitor Buon Funcon
2. Warning
2. Interface
3. Cauon
4. Operaonal Temperature & Humidity
5. Dot Defect (dead pixel) of TFT
6. FCC RF INTERFERENCE STATEMENT
CONTENTS
3
7
10
36
38
37
40
4
7
10
4
8
5
5
5
6
9
.......................................................................................................................................................................................
.......................................................................................................................................................................................................
...............................................................................................................................................................
............................................................................................................................................................................................
..................................................................................................................................................................................................................
...................................................................................................................................................................................................
........................................................................................................................................................................................................
.......................................................................................................................................................
................................................................................................................................................................................................ ..
......................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
..................................................................................................................................................................................................
.....................................................................................................................................
.....................................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................................................................................

3User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
1. Read all warnings.
2. Follow all instrucons to ensure longevity of monitor.
3. Do not place the monitor near water.
4. Clean only with dry cloth.
5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
6. Do not install near any heat sources such as radiators, heat registers,stoves, or other heat generang
devices.
7. Do not override the safety purpose of the polarized or grounding-type plug.
8. A polarized plug has two blades with one wider than the other.
9. A grounding type plug has two blades and a third grounding prong.
10. The wide blade or the third prong are provided for your safety.
11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.
12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles
and the point where it connects to the monitor.
13. Only use aachment/accessories specied by the manufacturer.
14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the
monitor. When a cart is used, use cauon when moving the cart & monitor in combinaon to avoid
injuries.
15. Unplug the monitor during lightning storms or when unused for long periods of me.
16. Refer all servicing to qualied service personnel. Servicing is required when the monitor has been
damaged in any way.
The monitor shall not be exposed to dripping or splashing and objects containing liquids, such as vases
shall be placed near the monitor.
The monitor should have ample distance (e.g. 10cm) from the wall for sucient venlaon.
Important Safety Instruction
SAFETY INSTRUCTION

4User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage
within the monitor’s enclosure that may be of sucient magnitude to constute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the monitor.
Important Safety Instruction
Mark Indication and Substance
Warning
SAFETY INSTRUCTION
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
• Do not use damaged or loose cables and plug.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not connect too many extension cords or plugs to one outlet.
• Do not excessively bend the plug and wire.
• Do not disconnect the power cord while it's sll plugged into the monitor.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.
• Never open the monitor. There are no user-serviceable parts inside and opening will void warranty.
• Removing covers may expose you to dangerous shock hazards or other risks.
• Keep any heang devices away from the power cable and monitor.
• Do not place the monitor near water.
• Do not insert objects of any kind into the monitor's open slots, as they may touch dangerous voltage points.
• Please follow the laws and regulaons of your municipality to dispose of the tube properly.
• Do not use the monitor in high temperature, humid, dusty or oily areas.
• Do not install the monitor where it will be exposed to connual vibraon.
• Keep the plasc packaging out of children’s reach.
• If any damage is defected upon rst opening the box, contact agency from which you bought the monitor directly.
• If your monitor does not operate normally – in parcular, if there is any unusual sound or smell coming from the
monitor – unplug it immediately and contact an authorized dealer or the service center.

5User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Important Safety Instruction
Caution
Available Temperature & Humidity
Dot Defect (dead pixel) of TFT
SAFETY INSTRUCTION
• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
• Make sure to unplug the power cord before cleaning the monitor.
• Make sure to leave a gap between monitor and wall.
• Do not drop the monitor when moving it.
• Place your monitor in a locaon with low humidity and a minimum dust.
• Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the
showcase or shelf.
• Do not place the monitor on an unstable or small surface area.
• Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.
• Do not try to move the monitor by pulling on the power cord.
• Do not cover the vents on the monitor.
• When moving the monitor, turn o and unplug the power cord. Make sure that all cables, including HDMI
cable and cables connected to other devices, are disconnected before moving it.
• Place the monitor out of children’s reach, as they could damage it by hanging onto it.
• Operang Temperature : 14°F ~ 122°F / -10°C ~ 50°C
• Operang Humidity : 20 ~ 70% RH
ViewZ monitors are manufactured using high-end semiconductor technology with precision rangs of 99.9%
and above. However, it may be the case that certain RGB and white pixels seem darker (or enrely unlit i.e.
black).
Modern producon methods cannot guarantee an absolute fault-free monitor. To this eect, no LED
manufacturer can guarantee a defect free panel. A few isolated pixel or sub-pixel faults are considered
tolerable and dierent policies exist that govern the amount of these tolerable values.
While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can somemes form for
which a separate ruling applies. A cluster is dened as an area of 5x5 pixels. ViewZ’s policy on pixel failure:
either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com

6User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Note
FCC RF INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment
in a residenal area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.
Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
► DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the
radio interference regulaon of Canadian Department of communicaons.
Statement
• VGA and XGA are the registered trademark of IBM.
• VESA is the trademark of Video Electronics Standard Associaon.
• HDMI, HDMI logo and High-Denion Mulmedia Interface
(high denion mulmedia digital interface) are the trademark or
registered trademark of HDMI Licensing LLC.
If some company or product trademark is not parcularly stated, the use of trademark has been fully recognized. Do
not alter, decompile, disassemble, decode or conduct reverse engineering to the soware installed in the product, or
it can be deemed as breach of the law.

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
The following tools may be required depending on your installaon.
Your ViewZ monitor is shipped with all proper installaon hardware and components. If there are parts missing
and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.
Electronic Stud Finder Protecve Eye-wearPencil Level Phillips Screwdriver
Assembly Components - provided
Mounting Option
Installation Tools
TFT-LED Monitor (Qty 1)
Monitor Stand (Qty 1)
110V Power Cable (Qty 1)
DC 12V Power Supply (Qty 1)
User Manual (Qty 1) Remote Controller (Qty 1)
(Without baery (AAA))
INSTALLATION
VESA 75, 100
Tilng -20° ~ +20°
VESA 50, 75, 100
15mm Low prole
Swivel -30° ~ +30°
Tilng -12° ~ +5°
VESA 75 ~ 200
Swivel ± 90°
Wall & Pole Mount
Your ViewZ monitor is compable with ViewZ monitor mounts. For more informaon, please contact ViewZ USA at (888)-998-4399.
• Part # • Part # • Part # WM05 WM11 AM02-A
24IPM
24IPM
24IPM
• Part # SCM-SQ VESA 75, 100
Swivel 360°
PAN 180°
24IPM
Tilng ± 90°

8User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
The following image is the descripon of interface input ports of IP Input Monitor.
Interface Input Ports
CONNECT EXTERNAL EQUIPMENTS
q rw e t y u i o a
1. HDMI In
2. Reset
3. HDMI Out
4. MICRO SD
5. Audio Out
6. ETHERNET 10/100 (RJ 45)
7. USB (Type C) In
8. USB 3.0 (Type A) In
9. USB 2.0 (Type A) In
10. DC 12V In

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Remote Controller
REMOTE FUNCTION
q
w
r
e
t
y
u
1. Power
2. Up
3. Le
4. Select
5. Right
6. Down
7. Recent Apps
8. N / A
9. Sengs
10. Back
11. Home
12. Volume Up
13. Volume Down
i
o
s
a
d
f
Display image, sound and custom sengs can be adjusted in OSD (On Screen Display) menu by remote controller.
To adjust monitor seng value :
1. Press the 'Sengs' buon to enter the setup of running app
2. Press the 'Recent Apps' buon to select recent apps
3. Press the 'Home' buon to go directly to the home screen
4. Press the 'Back' buon to go back the previous screen
5. Press the ▲ / ▼ / ◄ / ► buons to select the desired sub-menu
6. Press the 'OK' buon to select
7. Press the 'Volume Up & Down' buon to up / down audio volume

10 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
On Monitor, Button Control
1. Le ◄(Le Move)
Move the selecon to the le
2. Right◄(Right Move)
Move the selecon to the right
3. L-C (Le Click Funcon of Mouse)
Same funcon of mouse le click
4. R-C (Right Click Funcon of Mouse)
Same funcon of mouse right click
5. Power
Monitor power on / o
q w e r t

11User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Initial Setup - Launch Onvif IP Cam Viewer
• Click on the desktop, you will see ViewZ's ONVIF IP Cam Viewer App. The App will be looks like below;

12 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
1 ONVIF 2 ONVIF 3 ONVIF
CONTROL AND FUNCTION
Initial Setup - Launch Onvif IP Cam Viewer
• Click & hold one of screens, then user will see a popup window which can control selected device (camera)
• Edit - edit the selected device (camera) informaon
• Explore - congure the enre feature of selected device (camera)
• Acve - play & stop the live streaming of selected device (camera)
• Deep Link - not stupport
• Delete - delete the selected device (camera) from the list
• Delete All - delete all device (camera) from the list
• Retrieve Access Log - restore the selected device (camera) info
• Retrieve System Log - restore the enre system info
• Reboot - reboot the selected device (camera)
• So-reset to Factory Default - restore factory default
• Hard-reset to Factory Default - restore factory default
• Device Recordings - not support in this status. User can record a live video on mulview or sequenal viewing mode
• Set as startup device - setup the selected device (camera) as the inial view when launching App

13User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Initial Setup - VMS Shortcut Icon Folder
• Click on the desktop, you will see the shortcut icons which administrator installed & added on this folder.
• User (administrator) can add this shortcut icon at the 'Sengs'.
• On the 'Sengs', if user (administer) select an App and click & hold, user will see the selected App is added on VMS
shortcut icon folder.
Click & hold to add the
selected App on the VMS
shortcut icon folder

14 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Initial Setup - Access Settings
• Click on the desktop, you will see the Sengs window. User (administrator) need to enter ID / PWD.
• The default ID / PWD is 'root / root'.
• On 'Sengs', user can install App, export saved screenshots & recorded videos and change android setup.

15User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Initial Setup - Main Control Buttons
• Click to volume down. Click to volume up. When user click these buons, user can see
• Click to go back to previous menu.
• Click to go back the home screen.
• Click to see mul windows which show running apps.
Volume up & down
status bar

16 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Initial Setup - Switch Background Image
1. If user want to change the desktop background image, user needs to click & hold empty area of screen.
2. On 'Wallpapers' popup menu, click 'Wallpapers'
3. 'Wallpapers' window show background images.
4. Select and double click it. Then, the selected image will be displayed in the background.
1. Click & hold the
empty area to switch
background image
2. Double click the
desired image

17User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
Add a Device
• If user want to add an IP camera, click icon on ViewZ's ONVIF IP Cam Viewer. Then, user will see the above screen.
• At this window, user can add IP camera based on its circumstance.
• FROM DISCOVERED - All ONVIF and Window IP camera devices on your LAN (network) are discovered automacally.
• ONVIF DEVICE (Recommended) - Recommended choice if your device is ONVIF conformant because
it has full funconality.
• GENERIC RTSP - RTSP streams have both video and audio, but no built-in PTZ control. The ViewZ's ONVIF IP Cam Viewer
has custom commands that can be used potenally for PTZ.
• GENERIC MJPEG - MJPEG has video only. Its advantages are low latency and support by old cameras.
• WIN IP CAMERA - WIN IP Camera is a Windows Phone app that turns a Windows Phone into a high end HD IP camera with
double-lens, crystal clear two-way audio, baery power, internal/external storage, touch-screen control. This may be the
best use of a rered idling old phone increasing its value by 10 folds. You can download this FREE Windows Phone app
from Windows Store.
• FROM DEMO - Demo cameras from third pares can be added for tesng. This demo funcon needs to access
the WAN network.

18 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
• When user click 'FROM DISCOVERED', user will see below screen and the green box buon can be added on the ONVIF IP
Cam Viewer. The gray box buon (device) means it's already added on ONVIF IP Cam Viewer.
Add a Device - FROM DISCOVERED
• This funcon requires IPM monitor and IP cameras (or ONVIF devices) should be grouped in the same network.
• This funcon allows user to select a device and easily ll up the address eld.
This means IPM monitor
automatically discover 11
connectable devices in the network

19User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
• When user select & click one of listed device, user will see the above screen.
• And user might need to type user name, password and more informaon depending on your device conguraon.
But, the 'Address' will be automacally typed by the system.
• Click "SET UP" to congure by retrieving informaon from the device.
• Click "TEST (Video)" to allow ONVIF IP Cam Viewer to select the best transport protocol and validate the video streaming.
Add a Device - FROM DISCOVERED

20 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
• This funcon allows user to type the ONVIF device informaon manually.
• This funcon is more proper for conguring WAN devices.
• Click "Set Up" to congure by retrieving informaon from the device.
• Click "Test Video" to allow ONVIF IP Cam Viewer to select the best transport protocol and validate the video streaming.
Add a Device - ONVIF DEVICE