Vifly R130 User manual

VIFLY R130 Quick Start Guide
16 / 16
Group A: CH1:5658MHz CH2:5695MHz CH3:5732MHz CH4:5769MHz CH5:5806MHz CH6:5843MHz CH7:5880MHz CH8:5917MHz
Group B: CH1:5740MHz CH2:5760MHz CH3:5780MHz CH4:5800MHz CH5:5820MHz CH6:5840MHz CH7:5860MHz CH8:5880MHz
Group C: CH1:5865MHz CH2:5845MHz CH3:5825MHz CH4:5805MHz CH5:5785MHz CH6:5765MHz CH7:5745MHz CH8:5725MHz
Group D: CH1:5705MHz CH2:5685MHz CH3:5665MHz CH4:5645MHz CH5:5885MHz CH6:5905MHz CH7:5925MHz CH8:5945MHz
Group E: CH1:5733MHz CH2:5752MHz CH3:5771MHz CH4:5790MHz CH5:5809MHz CH6:5828MHz CH7:5847MHz CH8:5866MHz
VIFLY
Website: www.viflydrone.com
Facebook: www.facebook.com/viflydrone
YouTube: www.youtube.com/c/viflydrone
ATTENTION
The motors will spin when the aircraft is armed.
Always remove all propellers before tuning the aircraft.
Before using VIFLY R130, please read Quick Start Guide and watch video tutorials on VIFLY official
website (www.viflydrone.com).
VIFLY R130
QUICK START GUIDE V1.1
www.viflydrone.com

VIFLY R130 Quick Start Guide
2 / 16
GET TO KNOW THE AIRCRAFT
 The VIFLY R130 body is made of carbon fiber and ABS plastic, super light but durable.
 Built in the latest F4 flight controller and 15/20A BLHeli-S ESCs, VIFLY R130 is fast and
responsive.
 Selectable 25/200/500mW 5.8GHz video transmitter and 700TVL high sensitive camera bring you
fantastic FPV experience.
1. Camera
2. Headlight
3. Propeller (Clockwise T3045BN)
4. Propeller (Counter Clockwise T3045BNR)
5. Digital LED
6. Battery Mount
7. Video Transmitter Channel & Power Button
8. USB Port
9. Bind Button
VIFLY R130 Quick Start Guide
15 / 16
SPECIFICATIONS
Aircraft
Size (L x W x H) 125x115x30mm
Wheelbase 130mm
Weight 165g (Battery excluded)
Remote Controller Flysky FS-i6 6 Channels
Receiver Flysky FS-A8S 8 Channels PPM
Flight Controller Omnibus F4, CPU 168MHz
Firmware BetaFlight
OSD BetaFlight OSD
Brushless Motor 1306-4000KV
ESC BLHeli-S 15/20A
Gyro SPI, 8KHz loop speed
Propeller DAL T3045BN
Battery 11.1V 850mAh 35C 3S Li-PO / 14.8V 550mAh 35C 4S Li-PO (optional)
Max Battery Size (L x W x H) 55x30x30mm
Flight Time 6-8 mins(3S) / 6-8 mins(4S)
Working Environment 0℃ ~ +40℃
Camera
Sensor ON Semiconductor 1/4 inch high sensitive CMOS
Horizontal Resolution 700TVL
Field of view 120°
Wireless Video Transmitter
Output Power P01 - 25mW / P02 - 200mW / P03 - 500mW
Antenna Right-handed circular polarization
Antenna Socket SMA Male
Working Frequency 5.8GHz
Channel Group A/B/C/D/E 40 channels

VIFLY R130 Quick Start Guide
14 / 16
MANAGE THE VIDEO TRANSMITTER
1. Switch Channels
 VIFLY R130 has built-in wireless video transmitter with 40 channels.
 Tap the “CH” button to switch channel between A1 to E8.
 “CA1” represents channel A1.
2. Change Output Power
 The video transmitter has 3 different output power settings.
 Hold the “CH” button for 3 seconds, then tap it to switch output power between P01 to P03.
 P01/P02/P03 represent 25mW/200mW/500mW.
 Higher power gives better video signal, but more battery consumption and heat.
VIFLY R130 Quick Start Guide
3 / 16
10. Power Port (XT30)
11. External LED Port
12. Video Transmitter Antenna
13. Taillight
ATTENTION
The motors will spin when the aircraft is armed.
Always remove all propellers before tuning the aircraft.
Before using VIFLY R130, please read Quick Start Guide and watch video tutorials on VIFLY official
website (www.viflydrone.com).

VIFLY R130 Quick Start Guide
4 / 16
GET TO KNOW THE REMOTE CONTROLLER
 The remote controller uses 2.4GHz with 6 channels.
 The max distance is 500 meters.
 The remote controller has 2 different versions, Mode 1 (right hand throttle) and Mode 2 (left hand
throttle).
VIFLY R130 Quick Start Guide
13 / 16
OPERATION INSTRUCTIONS
Aircraft Remote Controller
THROTTLE
Up/Down
Mode 1
Mode 2
PITCH
Forward/
Backward
Mode 1
Mode 2
ROLL
Left/Right
Mode 1 / Mode 2
YAW
Spin
CCW/CW
Mode 1 / Mode 2

VIFLY R130 Quick Start Guide
12 / 16
7. Disarm the Aircraft (Motor lock)
 Push the throttle stick to the bottom left position and hold for 3 seconds (MODE 2). If you are
MODE 1 user, please refer to MODE 1 diagram
MODE 1
Right Hand Throttle
MODE 2
Left Hand Throttle
 On the aircraft, when the blue LED lights off, the aircraft is disarmed.
 ATTENTION
Always disarm the aircraft before you touching it.
VIFLY R130 Quick Start Guide
5 / 16
 VIFLY R130 features 3 different flight modes, Angle/Horizon/Air modes, selected by Switch C
(SWC).
 Angle Mode is suggested for all beginners.
Angle Mode Horizon Mode Air Mode
SWC "1" SWC "2" SWC "3"
Max auto level enabled Basic auto level enabled Auto level disabled
ATTENTION
Switch B (SWB) is failsafe, it should be on position “1” during normal flight.
The aircraft will shut off the motors and beep loudly when SWB is on position “2”
IMPORTANT TIPS BEFORE FLIGHT
1. VIFLY R130 can only be used for pilots aged 14 or above.
2. Maintain a 30ft (9m) distance from the aircraft when taking off and landing.
3. Always fly in open areas. Don’t fly near airports or crowds.
4. Don’t fly near power lines, radio towers, or your connection may be interrupted.
5. Please obey local Law for flying aircraft.
6. VIFLY is not responsible for any damage caused by flying the aircraft.

VIFLY R130 Quick Start Guide
6 / 16
CHARGE THE BATTERY
 Plug the power cable to the wall outlet. Voltage from 100v to 240v is accepted.
 Connect the battery to the balance charger. “Charger” LED is red when charging the battery, it turns
to green when battery is fully charged.
PREPARE TO FLY
1. Check the antenna
 Make sure the antenna is tightened.
VIFLY R130 Quick Start Guide
11 / 16
6. Arm the Aircraft (Motor Unlock)
 Make sure the throttle stick is all the way down, all switches are in the up position.
 Push the throttle stick to the bottom right position and hold for 3 seconds (MODE 2). If you
are MODE 1 user, please refer to MODE 1 diagram.
MODE 1
Right Hand Throttle
MODE 2
Left Hand Throttle
 On the aircraft, when the blue LED lights on, the aircraft is armed. Slowly push the throttle
upwards, the aircraft will lift off.
 ATTENTION
The motors will spin when the aircraft is armed.

VIFLY R130 Quick Start Guide
10 / 16
5. Power on the aircraft
 Plug the battery on the aircraft.
 The digital LED will display current voltage of the battery. Please charge the battery, if the
voltage is lower than:
3S Battery – 11.1v
4S Battery – 14.8v
 The aircraft will beep low voltage warning when battery voltage drops to:
3S Battery – 10.5v
4S Battery – 14.0v
Please stop flying and recharge the battery.
VIFLY R130 Quick Start Guide
7 / 16
2. Install the propellers
 Put CW and CCW propellers onto the motors as following position.
 Tighten CW propellers in clockwise direction.
 Tighten CCW propellers in counter clockwise direction.

VIFLY R130 Quick Start Guide
8 / 16
3. Install the Battery
 Put the battery onto the battery mount.
 Use Velcro tape to fix the battery
 Fasten the battery strap.
VIFLY R130 Quick Start Guide
9 / 16
4. Bind the remote controller
 Hold bind button while powering on remote controller to enter bind mode.
 Hold bind button while plugging the battery, the aircraft will enter bind mode.
 For Flysky & Frsky remote controllers, the controller won’t display any success message.
 For Spektrum remote controller, binding process is successful when the controller displaying
“DSMX 22ms”.
 Unplug the battery on the aircraft.
 You can find bind and configure video tutorials for Flysky, Frsky and Spektrum on VIFLY
official website (www.viflydrone.com).
 ATTENTION
Please remove all propellers before binding the remote controller.