VigilLink VLSW-41H20R User manual

VLSW-41H20R
4X1 HDMI2.0 Switch with Audio ARC 18Gbps
VER 1.1

Thank you for purchasing this product.
Please read these instructions carefully for optimum performance and safety
before connecting, operating, or adjusting this product. Please keep this
manual for future reference.
I. Introduction
This high-performance HDMI 4x1 switcher supports HDTV formats up to
4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio
to separate digital and analog audio output. This product supports HDCP
repeater/CEC/ARC functions. Select any inputs by the front panel button or
IR Remote; the corresponding indicator LED on the front panel will be
illuminated.
2. Package
1 x HDMI 4x1 Switcher
1 x 5V/1APower Adapter
1 x 38KHz IR Rx cable
1 x Optical convert header (for SPDIF audio output)
1 x HDMI 4x1 IR Remote
1 x Operation Manual

3. Features
Compliant with HDMI 2.0a, DVI 1.0 standards
HDCP 2.2 and HDCP 1.4 compliant
Video formats up to 4Kx2K@60 and all HDMI 3D video formats
Supports PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH
Digital and analog audio output
Supports innovative EDID management (Auto/2CH/5.1CH/7.1CH
selectable)
Supports input port auto-switching or manual switching mode
Audio Return Channel (ARC) supports
4. Specifications
Technical
Frequency Bandwidth
18Gbps
HDCP Compliance
HDCP 1.4, 2.2
ESD Protection
Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Connection
Input Ports
4 HDMI Female ports, 1 IR Receive port and 1RS232
port
Output Ports
1 HDMI Female port and 1 L/R & Optical port
HDMI Audio Output
PCM2.1/5.1/7.1CH,Dolby5.1, DTS5.1, Dolby-
TrueHD, DTS-HD
Mechanical
Dimensions (mm)
180 (D) x85 (W) x 11.6 (H)
Weight
300g
Power Consumption
Max 2.5 W
Operating Temperature
0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature
-20˚C ~ 60˚C / -4˚F ~ 140˚F

5. Switcher Operation controls and Functions
Front Panel:
①Input indicator LED, the corresponding port LED will be illuminated when
its port is selected.
①Auto or manual select button:
Press this button for>2 seconds to select auto-switching or manual
switching mode.
Under manual switching mode, short pressing this button to select the
input port.
①EDID status LED (Auto means using TV EDID).
①EDID select button (Press this button to choose EDID mode
Auto/2.1CH/5.1CH/7.1CH)
①ARC status LED (this LED will be illuminated if ARC is enabled
successfully)
①ARC function on/off button

Rear Panel:
①HDMI output port, connect with HDTV or monitor by
HDMI cable
①HDMI input ports, connect with DVD, PS4, or Set-top Box
HDMI cable
①Audio output (including L/R analog and optical audio out)
①RS232 port
①IR receiver port
①DC 5V input port
6. IR Remote
ARC: Press this button to enable or disable the ARC function. ARC LED on
the front panel will be illuminated if the ARC function is enabled successfully.
Auto/2.1ch/5.1ch/7.1ch: Press these buttons to select different EDID
settings, and the corresponding LED on the front panel will be illuminated.
Auto Source: Press this button to select auto-switching or manual switching
mode.
In1/In2/In3/In4: Under manual switching mode, press this button to select the
input port.

7. Application Example